Example: barber

Fully Managed 8-Port Railway Ethernet Switch with …

Managed 8-Port Railway Ethernet Switch with PoERugged Embedded Network Box Fully Managed 8-Port rugged Ethernet Switch M12 D, A or X-Coded connectors on the front panel 10/100 (Fast) or 10/100/1000 Mbit/s variants 29 Gbit/s carrier grade switching matrix ITU Ethernet Linear/Ring Protection PoE+ power Sourcing Equipment (PSE ), up to 60 W output power Fanless and maintenance-free design Ultra wide range power supply input ( to 154 V DC) with interruption class S2 -40 C to +70 (+85) C with qualified components Compliant to EN 50155 ( railways ) Maintenance Free and Extremely RuggedThe NM31 family is a range of 8-Port fanless and maintenance-free Managed Ethernet switches, developed specifically for rough environmental conditions in rolling stock Speed, High Effici

www.men.de/products/nm31/ Diagram Ethernet M12 Connectors Power Supply Connector Earthing Stud NM31 Data Sheet l 2017-12-11 Page 2

Tags:

  With, Switch, Power, Ports, Railways, Ethernet, Port railway ethernet switch with

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Fully Managed 8-Port Railway Ethernet Switch with …

1 Managed 8-Port Railway Ethernet Switch with PoERugged Embedded Network Box Fully Managed 8-Port rugged Ethernet Switch M12 D, A or X-Coded connectors on the front panel 10/100 (Fast) or 10/100/1000 Mbit/s variants 29 Gbit/s carrier grade switching matrix ITU Ethernet Linear/Ring Protection PoE+ power Sourcing Equipment (PSE ), up to 60 W output power Fanless and maintenance-free design Ultra wide range power supply input ( to 154 V DC) with interruption class S2 -40 C to +70 (+85) C with qualified components Compliant to EN 50155 ( railways ) Maintenance Free and Extremely RuggedThe NM31 family is a range of 8-Port fanless and maintenance-free Managed Ethernet switches, developed specifically for rough environmental conditions in rolling stock Speed, High Efficiency and Extensive ProtocolsThe NM31 range of Managed switches provide the additional ability to configure, manage and monitor the LAN which allows more control over how data travels through the network and who has access.

2 The use of the identical firmware as provided for the G101 Ethernet Switch , simplifies complex administration and reduces efforts for administrator Application PossibilitiesThe NM31 range provide eight channels at the front panel, accessible through M12 connectors and cover different application requirements including with or without PoE+, type 1 and type 2 (previously af and at) compliant, and either 100 Mb or 1Gb Ethernet to Railway StandardsThe voltage supply for the NM31 Managed Ethernet Switch is designed for maximum flexibility and supports wide range input supply voltages from to 154 V DC, and meets all EN50155 class S2 requirements for voltages ranging 24 to 110 CooledThe NM31 is designed for fanless operation at temperatures ranging from -40 to +70 C.

3 The NM31 features IP40 protection when surface-mounted and cooling fins which serve as a heatsink for the internal electronics, and in this way provides conduction Family ConceptAs a member of MEN's family of extremely rugged industrial box PCs, the NM31 provides the same flexibility and scalability, as well as a look and feel which is common to the SheetNM31 Data Sheet l 2017-12-11 Page M12 ConnectorsPower Supply ConnectorEarthing StudNM31 Data Sheet l 2017-12-11 Page DataSupported Port TypesnThe following configurations are available:o8x 10/100 BASE-T Fully Managed Switch with D-coded connectors, 8x PoE + PSE with max.

4 60 Woutput power (Model: 09NM31-01)o8x 10/100/1000 BASE-T Fully Managed Switch with A-coded connectors, 8x PoE + PSE with W output power (Model: 09NM31-03)o8x 10/100/1000 BASE-T Fully Managed Switch with X-coded connectors, 8x PoE + PSE with W output power (Model: 09NM31-05)Protocols andFunctionalitynIEEE for 10 BASE-TnIEEE for 100 BASE-TnIEEE for 1000 BASE-TnGeneral Network SupportoIPv4oIPv6 ReadyoIPv6 Ready Phase 2nHost Configuration ProtocolsoDHCP Server / ClientoDHCP Option 82oDHCP SnoopingoDHCP ARP InspectionnDNSoDNS Client (RFC 2136)oDNS Proxy (RFC 5625) ports and Port ControlnEnergy Efficient Ethernet (IEEE )nETH Signal Equalization and power ControlnPort state (admin), speed, duplex mode and flow controlnPort frame size ( Jumbo Frames: 9216 Bytes max.)

5 NPort status (link monitoring) and statistics (MIB counters)nPort VeriPHY (cable diagnostics), ActiPHY andnPerfectReachnInband management (VRAP) Switch Management andMonitoringnOAMoLink OAM: IEEE ( EFM)oCFM: IEEE Down-MEP, ITU-T Up-MEP, ITU-T MIPoMEF E-LMI Configuration ManagementoSMAC/DMAC SwapoOAM Performance Monitoring MEF35 Phase 1nSNMP Management v1, v2c, v3 (RFC 1212, 1901-1908, 3411-3418)nSNMP v1 Traps (RFC 1157) with multiple destinationsnLLDP (IEEE )nTIA 1057 LLDP-MED extensionsnCDP (Cisco Discovery Protocol)nRMON Group 1, 2, 3 and 9 (RFC 2819)nSyslog (RFC 5424)nsFlow (RFC 3176)nPort and Flow MirroringnFallback FirmwareConfigurationManagementnTFTP (RFC 1350)

6 NFallback ConfigurationnConfigurable by Web / CLI / Telnet /SSL / ConsoleNM31 Data Sheet l 2017-12-11 Page DataRedundancy and FlowControlnStatic Link AggregationnIEEE Link Aggregation ProtocolnIEEE Back Pressure Flow ControlnIEEE Spanning Tree Protocol (STP)nIEEE Rapid STP (RSTP)nIEEE Multiple STP (MSTP)nBDPU Guard / Restrict RolenITU- Ring ProtectionnITU- Linear ProtectionnIEEE / ITU-T Connectivity Fault ProtectionnLoop ProtectionSecuritynNetwork Access Server (NAS):oPort-based IEEE and multiple IEEE based authenticationoVLAN and QOS assignmentoGuest VLANnRADIUS accounting (RFC 2866ff)nMAC address limit and MAC freezenIP MAC Binding / Binfind dynamic to staticnTACACS+ AccountingnWeb and CLI AuthenticationnIP Source guardnAuthorization (15 user levels)nDHCP Snooping (RFC 2132)nDynamic ARP InspectionVLANnVLAN Tagging and Trunking (IEEE )nSupported VLAN Types.

7 OPrivate Static VLAN (RFC 5517)oMAC, Protocol, IP-Subnet and Port based VLAN (IEEE )oVOICE VLAN (IEEE , IEEE )nDynamic VLANs (GVRP)nMulticast VLAN Registration (IEE MRP and MVRP)MulticastnIPv4 Internet Group Management protocol (IGMP) v1, v2, v3nMaximum number of IGMP Groups:o8000 for Layer2o8000 for IP4/IP6nIPv6 Multicast Listener Protocol (MLD) v1, v2nMulticast VLAN registration protocol (MVR)nMRP/GMRP Multicast Registration Protocol (IEEE )QoSnActive Priority Queues per Port: 8nClass of Service (IEEE )nPort and queue egress shapernStorm control (for Unicast, Broadcast, Multicast, unknown)nPort and Queue Egress shapernScheduler Mode (weighted and fair scheduling)nPort Default/User Priority and Input Priority MappingnDCSP remarking (RFC 2474)nQoS control list (QCL mode))nRandom Early Detection (RED, RFC 2309)nPolicers (port, service, queue and global/VCAP - ACL)nDiffServ (RFC 2474) and Tag remarkingNM31 Data Sheet l 2017-12-11 Page DataSynchronizationnNTPv4 Client (RFC 5005)

8 NIEEE 1588v2 PTP with one-step and two-step clocknIEEE 1588v2 PTP with redundant master clocksnIEEE 1588v2 boundary clocknIEEE 1588v2 unicast and multicast supportPower Over EthernetFeaturesnPower over Ethernet functions on all portsoPSE ( power Sourcing Equipment) functionoUp to 60 W total output powernDeratingo> 55 C: InterfacenConsole interfaceoRS232 rear console port for local system managementnWeb interfaceoWeb based control and management interface over any Ethernet portFront InterfacesnEthernetoEight M12 connectorsnEthernet LEDnPower supplyoOne M12 connector for ultra wide range powernPower status LEDoIndicates power supply stability or range validityRear InterfacesnRS232oOne M12 service consoleElectrical SpecificationsnSupply VDC to 154 VDCoNominal voltages 24, 36, 48, 72, 96 and 110V VDC.

9 According to EN50155oPower interruption class S2 (10 ms)o18 VDC to 32 VDCnPower consumptiono+85 W SpecificationsnDimensions: Height mm x Width 220 mm x Length 164 mmnWeighto10/100 BASE-T Managed Switch : 1400 go10/100/1000 BASE-T Managed Switch : 1500 gEnvironmentalSpecificationsnIP protectionoIP40 when surface-mountednTemperature range (operation)o-40 C to 70 C (qualified components), with up to 85 C for 10 minutes according to class Tx (EN50155)oFanless operationnTemperature range (storage): -40 C to +85 CnRelative humidity (operation): max.

10 95% non-condensingnRelative humidity (storage): max. 95% non-condensingnAltitude: -300 m to +3000 mnShock: 50 m/s , 30 ms (EN 61373)nVibration (function): 1 m/s , 5 Hz to 150 Hz (EN 61373)nVibration (lifetime): m/s , 5 Hz to 150 Hz (EN 61373)NM31 Data Sheet l 2017-12-11 Page DataReliabilitynMTBF: 511 624 h @ 40 C according to IEC/TR 62380 (RDF 2000)SafetynFlammability (PCBs)oUL 94 V-0nFire ProtectionoEN 45545-2nElectrical SafetyoEN 50153:2014 / EN 50155:2007 EMC Conformity( Railway )nEN 50121-3-2:2015 Software SupportnFirmware for configuration and management includedNM31 Data Sheet l 2017-12-11 Page InformationGermany


Related search queries