Example: tourism industry

Generac INSTALL MART - Watts Water Technologies

The flexible connection between the gas supply and the gas inlet of a Generac Stationary Outdoor Backup/Standby GeneratorFeatures Operating Temperature -40 F to 150 F (-40 C to C) Operating Pressure MAX ( kPa) Hydrostatic Burst Pressure MIN 250psi (1725 kPa) Flexible Tube Material Annealed 304 Stainless Steel Flare Nut Material Carbon Steel with Zinc Trivalent Chromate Plating Flare Adapter Material Carbon Steel with Zinc Trivalent Chromate Plating PVC Dip Coating Gray Heavy Duty, Antimicrobial, UV StabilizerCSA Group Certificate of Compliance to Product StandardsANSI Connectors for Outdoor Gas Appliances and Manufactured HomesScope states ..intended for exterior use above ground for making non-rigid the gas supply and the gas inlet of an appliance for outdoor installation that is not frequently moved after installation. In addition section states the connector is designed for occasional movement after installation. Repeated bending, flexing or extreme vibration must be avoided.

The flexible connection between the gas supply and the gas inlet of a Generac® Stationary Outdoor Backup/Standby Generator Features • Operating Temperature -40°F to 150°F (-40°C to 65.6°C)

Tags:

  Install, Generac, Generac install

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Advertisement

Transcription of Generac INSTALL MART - Watts Water Technologies

1 The flexible connection between the gas supply and the gas inlet of a Generac Stationary Outdoor Backup/Standby GeneratorFeatures Operating Temperature -40 F to 150 F (-40 C to C) Operating Pressure MAX ( kPa) Hydrostatic Burst Pressure MIN 250psi (1725 kPa) Flexible Tube Material Annealed 304 Stainless Steel Flare Nut Material Carbon Steel with Zinc Trivalent Chromate Plating Flare Adapter Material Carbon Steel with Zinc Trivalent Chromate Plating PVC Dip Coating Gray Heavy Duty, Antimicrobial, UV StabilizerCSA Group Certificate of Compliance to Product StandardsANSI Connectors for Outdoor Gas Appliances and Manufactured HomesScope states ..intended for exterior use above ground for making non-rigid the gas supply and the gas inlet of an appliance for outdoor installation that is not frequently moved after installation. In addition section states the connector is designed for occasional movement after installation. Repeated bending, flexing or extreme vibration must be avoided.

2 Normal operation of a clothes dryer, rooftop HVAC unit or SIMILAR OUTDOOR APPLIANCE DOES NOT constitute extreme vibration or Connectors for Gas Appliances (Excluding 60/61 Series)Job Name _____Job Location _____Engineer _____Approval _____Contractor _____Approval _____Contractor's No. _____Representative _____SKU _____For Use with Generac Stationary Outdoor Standby GeneratorsES-D-GAC_Generac_InstallSmartG enerac Flexible Fuel LinesDormont product specifications in customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Dormont Technical Service. Dormont reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Dormont products previously or subsequently sold. Refer to the owner's manual for warranty CodesANSI 54 National Fuel Gas Code Section Fuel Gas Code (IFGC) Section Natural Gas and Propane Installation Code (CSA Group) Section Mechanical Code (UMC) Section Plumbing Code (UPC) Section ApprovalsCommonwealth of Massachusetts Board of State Examiners of Plumbers and Gas FittersAdditional TestingUL2200-2015: Stationary Engine Generator Assemblies Section 66B Vibration PART NUMBERDORMONT PART NUMBERSERIESNOMINAL IDNOMINAL ODFLARE ADAPTER THREADS (MALE NPT)NOMINAL 413 42410000009776 CAN41-4141-48 GEN413 413 44810000009777 CAN41-4141-72 GEN413 413 47210000000498 CAN51-5151-24 GEN51111 412410000000499 CAN51-5151-48 GEN51111 414810000000500 CAN51-5151-72 GEN51111 4172$PROGRAMINSTALLMARTFor use with Generac stationary outdoor backup/ standby ConfigurationsES-D-GAC_Generac_InstallSm art 1703 2016 DormontMinimum Flow Capacity at Specified Pressure DropStraight Length BTU/hr.

3 NATURAL GAS, SG, 1000 DROP (INCHES Water COLUMN) Generac Part NumberDormont Part NumberSERIESN ominal ID inNominal Lenght in10000009793 CAN41-4141-24 GEN413 424290,900356,278411,395459,953503,85454 4,224581,80010000009776 CAN41-4141-48 GEN413 448217,000265,770306, 884343,107375,855405,970434,000100000097 77 CAN41-4141-72 GEN413 472173,900212,983254,932247,960301,20432 5,337347,80010000000498 CAN51-5151-24 GEN51124581,800712,557822,789919,9071,00 7,7071,088,4481,163,60010000000499 CAN51-5151-48 GEN51148442,700542,195626,072699,970766, 779828,216885,40010000000500 CAN51-5151-72 GEN51172347,800425,966491,863549,920602, 407650,674695,600 Straight Length BTU/hr. LP GAS, SG, 2500 DROP (INCHES Water COLUMN) Generac Part NumberDormont Part NumberSERIESN ominal ID inNominal Lenght in10000009793 CAN41-4141-24 GEN413 424465,400569,996658,175735,862806,09687 0,684930,80010000009776 CAN41-4141-48 GEN413 448344,000421,312486,489543,912595,82564 3,565688,00010000009777 CAN41-4141-72 GEN413 472278,240340,773393,491439,936481,92652 0,539556,48010000000498 CAN51-5151-24 GEN51124930,8801,140,0911,316,4631,471,8 511,612,3311,741,5171,861,76010000000499 CAN51-5151-48 GEN51148708,320867,5111,001,7161,119,952 1,226,8461,325,1451,416,64010000000500 CAN51-5151-72 GEN51172556,480681,546786,982879,872963, 8521,041,0791,112,960 USA: T: (800) 367-6668 F: (724) 733-4808 : T: (905) 332-4090 F: (905) 332-7068 America: T: (52) 81-1001-8600 F: (52) 81-8000-7091 part number 10000000498 (Dormont part number CAN51-5151-24 GEN)can supply a minimum of 581,800 natural gas @ in.

4 Water column pressure drop to the installations must completely comply with all Dormont manufacturing company warnings and instructions, national, state and local codes and all applicable ANSI standards.


Related search queries