General and AE300MG/MN Integral Type, …

1 GeneralSpecifications<<Contents>> <<Index>>ADMAG AE is the Advanced Engineering designedmagnetic flowmeter, evolved from the field provenADMAG series. ADMAG AE has a dual compartmenthousing providing ease of wiring while isolating theelectronics from the environment. ADMAG AE continuesthe use of dual frequency excitation, which provides quickresponse and noise free output. ADMAG AE excitationmethod and a ceramic lining allow this magneticflowmeter to be applied to an even greater range ofapplications. FEATURES Fast response and high stability by our unique DualFrequency Excitation method.

2 High Accuracy, of flowrate. Dual compartment housing separates the wiring sectionfrom the electronics and protects the electronics fromcorrosive environments. AC/DC power supply common use (100/200V). Commonly available 4-conductor cables used for 24 VDC version. High visibility backlit LCD for easy operation. ultra high purity alumina ceramic lining. An Integral leak-proof Pt Alumina cermet electrode isused on flow tubes with ceramic liners. Conform to Pressure Equipment Directive 97/23/EC STANDARD SPECIFICATIONS Magnetic Flow Converter for AE100MG/MN/SC/MH,AE200MG/MN/SC/MH, AE300MG/MN ; AE14 Note 1:For models with no indicator, a hand-held terminalis necessary to set 2:Pulse output, status output and alarm output usecommon terminals, therefore, these functions arenot available at the same 3:Please refer to GS01E07F01-00 Fieldbuscommunication type(/FB).

3 Excitation method: Dual frequency excitationOutput Signal(Note 3):Current Output: 4 to 20 mA DC (Load resistance 750 maximum).Transistor Contact Output(Open-collector):Pulse, alarm or status output selected byparameter setting. Contact rating: 30 V DC(OFF), 200 mA (ON).Communication (option)(Note 3):BRAIN or HART (Superimposed on the 4 to 20 mA DCsignal)Load Resistance: (including cable resistance)BRAIN:250 to 600 HART:230 to 600 , depending on q ty of fielddevices connected to the loop (multidropmode)Load Capacitance: F maximumLoad Inductance: mH maximumDistance from Power Line:15 cm( ft) or more (Parallel wiringshould be avoided.)

4 Input Impedance of Receiver Connected to the Receiv-ing Resistance: 10k or larger (at kHz)Maximum Cable Length:2 km (6500 ft) (when polyethylene-insulated PVC-sheathed control cables(CEV cables) are used)Note:HART is a registered trademark of the HARTC ommunication Flow Rate Display Function:Flow rate can be displayed either inengineering units or in percent of span.(for models with indicator)Totalizer Display Function:Totalized volume in any engineering unit canbe displayed by setting a totalizing factor.(for models with indicator)Damping Time Constant(Note 1):Settable from second to 200 seconds(63% response time).

5 Span Setting Function(Note 1):Volumetric flow setting is available by settingvolume unit, time unit, flow rate value andflow tube Unit: gallon(US), m3, l(litre), cm3,barrel(= )Velocity Unit: ft, mTime Unit: sec., min., hour, dayFlow Tube Size: inch, mmPulse Output Function(Note 2), (Note 3):Scaled pulse can be output by setting apulse Width: Duty 50% or fixed pulse width ( , 1, 20,33, 50, or 100 ms) - user Rate: to 1000pps (when pulse outputfunction is selected.)Status Output Function(Note 2), (Note 3):One of the following is selected byparameter setting.

6 Auto 2 Ranges Status Output:Indicates the selected range for automaticdual range function. Forward and Reverse Status Output:Indicates the flow direction for forward andreverse flow measurement mode. Totalization Status Output:Indicates that the internal totalized valueexceeds the set value. Low Limit Alarm:Indicates that flow rate is under the lowlimit set AE100MG/MN/MH/SC, AE200MG/MN/MH/SCand AE300MG/MN Integral Type, Model AE14 Converter, Models AE100DG/DN/DH,AE200DG/DN/DH and AE300DG/DNMagnetic FlowmeterYokogawa Electric Corporation2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 JapanTel.

7 : 81-422-52-4443 Fax.: 81-422-52-2018GS 01E07A00-01 EGS 01E07A00-01E Copyright Jan. 1994(YK)20th Edition Dec. 2003(YK)AE100/200/300[Style:S2], AE14[Style:S1]2<<Contents>> <<Index>>GS 01E07A00-01E 20th Edition Dec. 01, 2003-00 All Rights Reserved. Copyright 1994, Yokogawa Electric CorporationAlarm Output Function(Note 2), (Note 3):Indcates that an alarm occurs(Normal Close Fixed).Self Diagnostics Function(Note 1):Converter failure, flow tube failure, errone-ous setting, etc. can be diagnosed Security During Power Failure:Data storage by EEPROM - no back-upbattery Connection:ANSI 1/2 NPT female, DIN female,ISO M20 female, JIS G1/2 Connection: M4 size screw Material: Aluminum :Polyurethane corrosion-resistant ; Deep sea moss green ( )Case; Frosty white (Munsell )Degrees of protection:IP67, NEMA 4X, JIS C0920 water tightprotectionMounting (AE14): 2-inch pipe mountingMagnetic Flow Tube for AE100MG/MN/SC/MH andAE200MG/MN/SC/MH, AE300MG/MN .

8 AE100DG/DN/DH, AE200DG/DN/DH, AE300DG/DNProtection: IP67, NEMA 4X, JIS C0920 water tight typeSize: General Purpose TypeSize in mm(inch) ( ), 5( ), 10( ), 15( ), 25(1), 40( ), 50(2), 80(3), 100(4), 150(6), 200(8)25(1), 40( ), 50(2), 80(3), 100(4), 150(6), 200(8), 250(10), 300(12), 350(14), 400(16) ( ), 5( ), 10( ), 15( ), 25(1), 40( ), 50(2), 65( ), 80(3), 100(4), 125(5), 150(6),200(8), 250(10), 300(12), 350(14),400(16) Explosion Proof TypeSize in mm(inch) ( ), 5( ), 10( ), 15( ), 25(1), 40( ), 50(2), 65**( ), 80(3), 100(4), 125**(5), 150(6), 200(8), 250(10)*, 300(12)*, 350(14)*, 400(16)* ( ), 5( ), 10( ), 15( ), 25(1)

9 , 40( ), 50(2), 80(3), 100(4), 150(6), 200(8)*250 to 400mm are only for CENELEC ATEX or SAA.**65 and 125mm of PFA lining are only for CENELEC ATEX. Sanitary TypeSize in mm(inch) (1), 40( ), 50(2), 65( ), 80(3), 100(4)*15 and 125mm flow tubes are available on :Terminal box (AE**D):Polyurethane corrosion-resistant ; Deep sea moss green ( )Case; Frosty white (Munsell )Body:Size to 100 mm( to 4 in.):No coating (Stainless steel surface)Size 125 to 400 mm(5 to 16 in.):Polyurethane corrosion-resistant white (Munsell )Flow Tube Material:Size to 15 mm( to in.)

10 Housing:Stainless steel (SCS11)Flange (15 mm( in.) only): Stainless steel(SUS304)Pipe:Stainless steel (SCS13) or Aluminaceramic ( ) Terminal box : Aluminum alloy (AE**D)Size 25 to 100 mm(1 to 4 in.)Housing:Stainless steel (SUS304)Flange:Stainless steel (SUS304)Pipe:Stainless steel (SUS304)* or Aluminaceramic ( ) Terminal box : Aluminum alloy (AE**D)Size 125 to 400 mm(5 to 16 in.)Housing:Carbon steelFlange:Carbon steelPipe:Stainless steel (SUS304)* or Aluminaceramic ( Sizes 150 and 200mm only) Terminal box : Aluminum alloy (AE**D)* For PFA or Polyurethane liningWetted Part Material:Lining:Fluorocarbon PFA*, Alumina ceramic,Polyurethane.