Example: quiz answers

General Manual TWIN - GKB Eq

General ManualTWINA utomatic TWIN Greasing SystemEG1701your efficiency is our challengeAll rights reserved. No part of this Manual may be copied and/or published by means of printing, photocopying,microfilm or by any other means without prior written permission from Groeneveld. This applies also to thedrawings and diagrams reserves the right to change parts at any time, without prior or direct notice to the customer. Thecontents of this Manual may also be changed without prior Manual applies to the standard version of the product. Groeneveld cannot accept liability for any damagearising from the use of specifications other than that are requested to contact Groeneveld technical service for information concerning adjustment, maintenancework or repairs that is not described in this this Manual has been prepared with the greatest possible care Groeneveld cannot accept responsibility forany errors of the concequences of such General Manual3 Date of Issue: March 2002 Tabl

Chapter 4 is the operating instructions for the greasing system. Chapter 5 is the maintenance instructions of the greasing system. The manual concludes with some appendices with checklists and technical specifications. At the back of the system manual you will find a glossary with an explanation of the various technical terms.

Tags:

  Instructions

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of General Manual TWIN - GKB Eq

1 General ManualTWINA utomatic TWIN Greasing SystemEG1701your efficiency is our challengeAll rights reserved. No part of this Manual may be copied and/or published by means of printing, photocopying,microfilm or by any other means without prior written permission from Groeneveld. This applies also to thedrawings and diagrams reserves the right to change parts at any time, without prior or direct notice to the customer. Thecontents of this Manual may also be changed without prior Manual applies to the standard version of the product. Groeneveld cannot accept liability for any damagearising from the use of specifications other than that are requested to contact Groeneveld technical service for information concerning adjustment, maintenancework or repairs that is not described in this this Manual has been prepared with the greatest possible care Groeneveld cannot accept responsibility forany errors of the concequences of such General Manual3 Date of Issue.

2 March 2002 Table of contentsEG1701 Preface - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Transport Efficiency - - - - - - - - - - - - - - - - - - - - - - - - Greasing Systems - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Automatic Greasing Systems - - - - - - - - - - - - - - - - - - - - - - - - - - - - of the system - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - of the parts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - pump - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - unit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - blocks and metering units - - - - - - - - - - - - - - - - pressure switch - - - - - - - - - - - - - - - - - - - - - - - - - - - - signal lamp - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - operating mode push-button.

3 - - - - - Twin display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - greasing cycle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - cycle A - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - cycle B - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - of operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - unit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - units - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - pressure switch - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - unit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - length of the greasing cycles - - - - - - - - - - - - - - - - - - - - length of the pumping phase - - - - - - - - - - - - - - - of the re-grease and pressure decrease phases - - - - - of the system to grease pressure malfunctions.

4 - - - frequency of the flashing code - - - - - - - - - - - - - - log - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - lamp - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - operating mode push-button - - - - - - - - - - - - - - - - - - - - - - - - - - - display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - test push-button - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - single-test cycle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - continuous-test cycle - - - - - - - - - - - - - - - - - - - - - - - - - - GINA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - and switching on the GINA.

5 - - - - ^_ib=lc=`lkqbkqpTWIN General ManualTable of contents4 Date of Issue: March instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - the system - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - the grease reservoir - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - of the correct grease - - - - - - - - - - - - - - - - - - - - - - - - - - - the reservoir - - - - - - - - - - - - - - - - - - - - - - - - - - - - - malfunctions.

6 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - malfunctions - - - - - - - - - - - - - - - - - - - - - - - - - - finding table - - - - - - - - - - - - - - - - - - - - - - - - - - finding procedures - - - - - - - - - - - - - - - - - - - - - - 49 Explanatory word list - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 53 Appendix ATechnical data - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 55 TWIN General Manual5 Date of Issue: March 2002 PrefaceEG1701 PREFACE your efficiency is our challengeTWIN General ManualPreface6 Date of Issue: March 2002EG1701 This system Manual is a description of the Twin Automatic Greasing System.

7 Theintention is to provide clients with an insight into how the system works, what thepossibilities are and, briefly, maintenance aspects. Furthermore, you will find thetechnical data of the various parts of the greasing system in this Manual . The systemmanual can also be used as a user Manual is not meant as a reference book when maintenance duties are carriedout. For these duties a separate maintenance Manual is available at Groeneveld. There is no extensive description of the GINA in this system Manual . For thisdescription, refer to the maintenance Manual is built up of different sections, indicated by chapter numbers. Thenumbering of the images re-starts with every new 1, the introduction gives a description of Groeneveld and of greasingsystems in General .

8 Chapter 2 describes the whole Twin greasing system. Chapter 3 provides an insight into the working of the various parts of the system. Chapter 4 is the operating instructions for the greasing system. Chapter 5 is the maintenance instructions of the greasing system. The Manual concludes with some appendices with checklists and the back of the system Manual you will find a glossary with an explanation ofthe various technical this Manual , the following pictograms are used to bring an item to the user sattention or to notify the :Important supplementary information is brought to the users attention, so tryingto prevent problems :This pictogram notifies the user when the danger of physical injury or severe dam-age to the apparatus by inadequate operation is General Manual7 Date of Issue: March 2002 IntroductionEG17011.

9 INTRODUCTION your efficiency is our challengeTWIN General ManualIntroduction8 Date of Issue: March chapter is a short presentation of Groeneveld Transport Efficiency and itsproducts. The chapter ends with some General remarks about the Twin Transport Efficiency in operational safety. With this thought in mind, Groeneveld wasfounded in 1971. The present, international network is administered from itsheadquarters in Gorinchem. Groeneveld strives for an expansion of its leadingposition, achieved by the company s solid image and customer-oriented employees form a team that daily works with great enthusiasm anddedication for its customers.

10 Extensive automation makes a high working ratepossible. The ISO 9001 standard is the basis for the guaranteed quality ofGroeneveld products. Frequent contact with clients and an extensive dealernetwork guarantee the good name of Groeneveld. We know what theentrepreneur needs today, not a ready-made product, but a custom-made solutionfor technologies offer new applications. Therefore Groeneveld has a large budgetavailable for the development of new cost-saving products. Our Research andDevelopment department not only collaborates with leading externalorganisations, but also with leading manufacturers of vehicles and addition to the Twin automatic greasing system, Groeneveld also deliversproducts such as: speed limiters board computer systems automatic oil level controllers reversing protection systems temperature recording systemsGroeneveld delivers a complete programme of cost-saving and comfort-enhancingproducts.


Related search queries