Example: marketing

HDMI Compliance Test Specification 1 - Texas Instruments

High-Definition Multimedia Interface Compliance Test Specification Version Hitachi Consumer Electronics Co., Ltd. Panasonic Corporation Koninklijke Philips Electronics Silicon Image, Inc. Sony Corporation Technicolor, Toshiba Corporation CONFIDENTIAL. HDMI Licensing, LLC. Confidential HDMI Compliance Test Specification Version Preface Notice THIS Specification IS PROVIDED AS IS WITH NO WARRANTIES WHATSOEVER, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, NO WARRANTIES OF. MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR. ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, Specification , OR. SAMPLE. Hitachi Consumer Electronics Co., Ltd., Panasonic Corporation, Koninklijke Philips Electronics , Silicon Image, Inc., Sony Corporation, Technicolor, , Toshiba Corporation and HDMI. Licensing, LLC. disclaim all liability, including liability for infringement of any proprietary rights, relating to use of information in this Specification .

Addition of Test for AVI InfoFrame supporting Extended Colorimetry, Content Type and Selectable YCC Quantization Range (8-31) 1.3c 2008/07/25 Addition of TMDS Signal Generator (4.2.1.9) Addition of overmold value for Type C connector(5-1) Addition of test for Active cable and Converter cable(5-2, through 5-8) Removed Active Cable Test (5-9)

Tags:

  Colorimetry

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of HDMI Compliance Test Specification 1 - Texas Instruments

1 High-Definition Multimedia Interface Compliance Test Specification Version Hitachi Consumer Electronics Co., Ltd. Panasonic Corporation Koninklijke Philips Electronics Silicon Image, Inc. Sony Corporation Technicolor, Toshiba Corporation CONFIDENTIAL. HDMI Licensing, LLC. Confidential HDMI Compliance Test Specification Version Preface Notice THIS Specification IS PROVIDED AS IS WITH NO WARRANTIES WHATSOEVER, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, NO WARRANTIES OF. MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR. ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, Specification , OR. SAMPLE. Hitachi Consumer Electronics Co., Ltd., Panasonic Corporation, Koninklijke Philips Electronics , Silicon Image, Inc., Sony Corporation, Technicolor, , Toshiba Corporation and HDMI. Licensing, LLC. disclaim all liability, including liability for infringement of any proprietary rights, relating to use of information in this Specification .

2 Copyright 2001-2011 by Hitachi Consumer Electronics Co., Ltd., Panasonic Corporation, Koninklijke Philips Electronics , Silicon Image, Inc., Sony Corporation, Technicolor, , and Toshiba Corporation. All rights reserved. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted herein. Unauthorized use or duplication prohibited. HDMI and all associated logos are trademarks of HDMI Licensing, LLC. Third-party trademarks and servicemarks are property of their respective owners. HDMI Licensing, LLC. Confidential Page ii HDMI Compliance Test Specification Version Document Revision History 2011/10/11 Addition of 4K x 2K Test Equipment ( ). Correction of Required Test Method (5-1). Correction of Required Test Method (5-3). Editorial of Recommended Test Method (5-6). Correction/Editorial of Required Test Method and Reference (5-7).

3 Editorial of Recommended Test Method (5-7). Clarification of Required Test Method (5-10). Editorial of Recommended Test Method (5-10). Editorial of Recommended Test Method (5-11). Editorial of Recommended Test Method (5-13). Editorial of Acronyms for Skew (7-6). Clarification of Required Test Method (7-9). Correction of Required Test Method (7-19). Editorial of Table 7-1 and 7-2 (7-25). Clarification/Correction of Required Test Method (7-27). Clarification of Recommended Test Method (7-30). Correction of Required and Recommended Test Method (7-34). Correction of Required Test Method (7-35). Clarification/Editorial/Correction of Required Test Method (7-36). Clarification/Editorial/Correction of Required Test Method (7-37). Correction/Clarification of Required Test Method (7-38). Editorial of Table 7-4, 5, 6, 7, 8 and 7-9 (7-38). Correction of Required Test Method (7-39).

4 Editorial of Table 7-10 (7-39). Modification of Recommended Test Method (7-39). Editorial of Test Object and Required Test Method (7-40). Clarification of Required Test Method (8-3). Editorial of Recommended Test Method (8-7). Correction of Required and Recommended Test Method (8-21). Clarification of High Speed Configurations (Appendix 1). Addition of 4K x 2K Test Equipment in High Speed Configurations (Appendix 1). Clarification/Editorial of Appendix 3, 4. 2010/03/04 Addition of Test for 3D Video Format (7-38). Addition/Modification of Test of EDID for new fields (3D) (8-3). Addition of Test for 3D Video Format (8-29). Other editorials (7-37). 2009/11/09 Correction/Addition of Test Method (5-2). Clarification of the requirement of measurement of the current on +5V. Power (5-3). Addition of Test of Inter-Pair Skew for Active cable (5-5). Clarification of Test for Active cable (5-8).

5 Modification of Test Method (5-10). Modification of Test Method (5-11). Clarification of EDID content value for Converter cable (5-13). Addition of Test in power off state (7-3). Addition of Test on CEC pins on all output connectors (7-14, 8-13). HDMI Licensing, LLC. Confidential Page iii HDMI Compliance Test Specification Version Addition of Test on Vcec measurement on Repeater output without CEC. connection (7-15, 8-14). Clarification of Test for Through Repeater (9-1). Addition/Clarification of Test Equipments ( , , , , , , , ). Clarification of Cable Assembly Test Points (5). Addition of Tests for type D (5-1, 5-2). Addition of Tests for type E (5-1, 5-2, 5-3, 5-4, 5-5, 5-10, 5-16). Addition of Test for Utility line impedance (5-15). Addition of plug and receptacle tests for type E ( ). Addition of Source Test Points ( ). Addition of Test for Quantization Range (7-23, 7-24).

6 Addition of 60-64 VIC formats to the table (7-25, 7-26). Addition of Test for Content Type (7-27). Removal of Test for Quantization Range (7-27). Addition of Test for LFEPBL (7-31). Addition of Test for 3D Video Format (7-38). Addition of Test for 4K x 2K Video Format (7-39). Addition of Test for Extended colorimetry Transmission (without xvYCC). (7-40). Addition/Modification of Test of EDID for new fields (3D, 4K x 2K, etc) (8- 3). Addition of Sink Test Points ( ). Addition of Test for type E (8-7). Correction for the range of VIC (8-20). Addition of Test for High Bitrate Audio (8-27). Addition of Test for One Bit Audio (8-28). Addition of Test for 3D Video Format (8-29). Addition of Test for 4K x 2K Video Format (8-30). Addition of Test for AVI InfoFrame supporting Extended colorimetry , Content Type and Selectable YCC Quantization Range (8-31). 2008/07/25 Addition of TMDS Signal Generator ( ).

7 Addition of overmold value for Type C connector(5-1). Addition of test for Active cable and Converter cable(5-2, through 5-8). Removed Active Cable Test (5-9). Addition of New Cable Test (5-10, 5-11, 5-12, 5-13 and 5-14). Correction of Test for CEC root Repeater (7-14, 8-13, 9-5). Editorial correction (7-3, 8-9, 8-24, Table7-1, Table7-2). Clarification of Test Signal ( ). Addition of test for Type 2 cable emulator (8-7). Clarification of Non-HDMI I/O ( ). Modification of Repeater Mini-CDF for Source/Sink function (Appendix 3). Addition of CDF fields for Cable (Appendix 3). 2007/08/01 Added Efficere fixtures for Type C connector 2007/03/16 Modifications to TE overview and policy description ( ). Addition of Agilent TDR to Recommended TE ( ). Clarification of tentative cable emulators ( ). Jitter tolerance test changes (8-7). Added cable tests for TMDS_CLOCK channel (5-3).

8 New VL triggering (7-2). HDMI Licensing, LLC. Confidential Page iv HDMI Compliance Test Specification Version Editorial and clarifications on CEC Line Degradation (7-15, 8-14). Added testing of additional source-supported Deep Color formats (7-34). Additional HDMI VSDB EDID checks (8-3). Additional TTC usage (5-3, 8-5, 8-6, 8-7). Incorporated Tek-recommended setup and calibration for TDR (8-8). Clarification on Sink Deep Color Recommended Test Method (8-25). Added long cable or cable emulator use for Repeater test (9-3). Added color-depths for each format in Source_Video_Formats (App. 3). Removed test for filler bytes (8-3). Removed Tektronix part number of cable emulator EFF-HDMI-CE-01. 2006/11/10 Clarified pixel clock vs. TMDS clock (throughout). Added new test equipment and test fixtures from Agilent and Tektronix for high-speed testing (throughout).

9 Added Reference Cable Equalizer to eye analysis equipment and tests. Added tests and test equipment capabilities for features (Deep Color, cable categories, xvYCC, HBRA, Type C connector). Added testing of 1080p 50Hz/60Hz in various tests. Added Transition Time Control (TTC) equipment and usage (5-3, 8-7). 2. Allowed use of any sufficient multi-meter, I C analyzer and power supply. Added preliminary cable phase measurements for passive-equalized cables per HDMI (5-7). Relaxed impedance requirements with 250ps excursion window as specified in HDMI (5-8, 8-8). Added preliminary active cable test (5-9). Modified VL limits, per HDMI and (7-2). Removed max rise/fall time limit, per HDMI (7-4). Removed Source Overshoot/Undershoot test (7-5). Added 20-bit trigger sequence for Inter-Pair skew check (7-6). Removed erroneous check of CLOCK in Inter-Pair skew check (7-7).

10 Set jitter measurement window at 0V (7-9). Clarified which frequencies to test for jitter and eye (7-9, 7-10, 8-7). Changed CEC capacitance limits, per HDMI (7-13, 8-9). Added check for new AVI InfoFrame fields (7-27). Added optional testing of jitter injected onto TMDS_DATA (8-7). Perform HPD voltage in both standby and off (8-10). Eliminated VGA Established Timings check (8-20). Degraded input signal used for Repeater output test (9-1). Added check of Physical Address-related CDF fields (9-5). Added HDCP testing requirements (section 1). 2005/12/15 Incorporation of Quantum Data 882 for CEC and EDID tests (sects. , , , Appendix 1). Add note regarding discontinued test equipment ( ). Added General Oscilloscope ( ). New policy submit all longer cable length (sect. 5 first paragraph). Clarified extent of overmold restriction (5-1). Restricted cable power consumption to 5mA (5-3).


Related search queries