HEAT RECOVERY VENTILATOR - Vanee

1 HRV 60 HPart no. 41602 (TOP PORTS)Part no. 41600 (SIDE PORTS)39 to 98 CFM ( in. )AN INGENIOUS AIR EXCHANGE SOLUTION THAT S AS VERSATILE AS IT IS COMPACT!Configured with factory built vertical or horizontal ports, the v nEE HRV 60H is the most versatile 98-cfm unit available on the market today. Among its exclusive features, this unit is equipped with integrated balancing and backdraft dampers in its exhaust to outside and fresh air supply operation can be interlocked with an existing furnace without ad-ding an extra relay. Also, for more convenience, its latches can be relo-cated on its front (as shown on unit picture). This compact, lightweight and powerful unit is the ideal choice for small single-family homes, high rise residential building and other limited space applications.

2 What s more, it is the only air exchanger of its size that can be upgraded from an HRV to an ERV, simply by changing its core. Versatile horizontal or vertical port confi guration Removable terminal block to ease auxiliary wall control connections Integrated pressure taps, if balancing required by building code Twin high-pressure blowers ENERGY STAR qualifi edREPAIRS AND MAINTENANCEAll parts of the v nEE HRV 60H that could need maintenance can be removed in less than 5 minutes, allowing direct access for easy repairs. The PSC motors are permanently lubricated. Finally, the removable electrical drawer with pull-out PCB assembly allows easy access for maintenance of major v nEE HRV 60H is protected by a 2-year warranty on parts only.

3 The heat RECOVERY core is covered by a limited lifetime warranty, with the original proof of at: heat RECOVERY VENTILATORC ontrols This unit is very simple to operate. Once it is installed, press on its push button, located on on the bottom of the unit, to activate it. Press once for low speed, once again for high speed, and once more to stop it. For more convenience, this unit can also be controlled by an optional main control. For a complete list of optional main and auxiliary controls available, refer to the Wall Control Compatibility Chart on last pages of wall controls specifi cation sheet , available at For more details about controls, refer to the Main and auxiliary wall controls user guide, also available at Complete line of registers and diff users Electric duct heater Dual exterior hood kit (including the Tandem transition), part no.

4 14690 Homeshield Defrosting SystemThe v nEE HRV 60H uses a unique defrosting method. No negativepressure is created by air exhausted to the outside, as the air is recirculated into the house, helping to prevent any RECOVERY CoreDimensions: 13 x 19 x 6 7/8 (33 cm x cm x cm)Exchange surface: 55 ( m2)Weight: lb. ( kg)Material: PolypropyleneType: Cross flowWarranty: Limited lifetimeRequirements and standards Complies with the UL 1812 requirements regulating the installation of heat RECOVERY Ventilators Complies with the CSA no. 113 Standard applicable to ventilators Complies with CSA C444 requirements regulating the installation of heat RECOVERY Ventilators Technical data was obtained from published results of tests relating to CSA C439 Standards HVI certifi ed and ENERGY STAR qualifi edVF0036 STALE AIR FROM BUILDINGFILTERED AIR TO BUILDINGOUTSIDETEMPERATUREDEFROST CYCLE(IN MINUTES)oCoFDEFROST/OPERATIONWARMER THAN -5 WARMER THAN 23NO DEFROST-5 TO -2723 TO -178/25-27 & LESS-17 & LESS10/22 NOTE: All specifi cations are subject to change without 15/02 product sheet NO.

5 91049550 Lemire Blvd., Drummondville, Qc, Canada J2C 7W9 - Tel.: 1-800-567-3855 Fax: 1-800-567-1715 Project:REMARKSL ocation:Part no.: Qty.:Submitted by: Date: DIMENSIONS: V NEE HRV 60H (PORTS ON SIDES)1: FRESH AIR TO BUILDING PORT2: EXHAUST AIR FROM BUILDING PORT1234 Model: HRV 60H Core fi lters: 30 ppi washable foam Speed control on unit: Low & high speeds. Part number top ports: 41602 x x ( cm x cm x cm) Other modes available with main and Part number side ports: 41600 Housing: Pre-painted steel optional wall controls Total assembled weight (including Insulation: Expanded polystyrene heat RECOVERY core: polypropylene core): 42 lb. (19 kg) Mounting: Suspension by chains - heat exchange surface area: 55 ( m2) and springs - Type/Material: Crossfl ow/Polypropylene Oval shaped ports; fi t 5 diameter ducts Supply and exhaust blower motor: 2 motors Unit electrical characteristics: Drain: 1/2 ( cm) fi ttings with - Protection type: Thermally protected Volts Frequency Ampere Watts 10 ft.

6 (3 m) PVC drain hose - Insulation class: B 120 60 Hz 1 120 VENTILATION PERFORMANCEEXTERNALSTATIC PRESSURENET SUPPLY AIR FLOWGROSS AIR FLOWSUPPLYEXHAUSTPAIN. M3/HL/SCFM M3 PERFORMANCESUPPLYTEMPERATURENET AIR FLOWPOWERCONSUMEDWAT TSSENSIBLERECOVERYEFFICIENCYAPPARENTSENS IBLEEFFECTIVENESSLATENT RECOVERY /MOISTURETRANSFER C FL/SCFMM3 RECOVERY EFFICIENCY3595----NOT TESTED4 (102 mm)6 (152 mm)2 (51 mm)13 (349 mm)VK0055A22 /16 (574 mm)27 /16 (688 mm)1919 /16 (503 mm)1312 /16 (310 mm)33: FRESH AIR FROM OUTDOORS PORT4: EXHAUST AIR TO OUTDOORS PORTALL PORTS FITS5 DIAMETER DUCTSV NEE HRV 60H (PORTS ON TOP)2 (64 mm)16 (413 mm)4 (102 mm)6 (152 mm)VK0056A12 16 (310 mm)323 (603 mm)22 16 (574 mm) 919 16 (503 mm) 13 ALL PORTS FITS5 DIAMETER DUCTS12341: FRESH AIR TO BUILDING PORT2: EXHAUST AIR FROM BUILDING PORT3: FRESH AIR FROM OUTDOORS PORT4: EXHAUST AIR TO OUTDOORS PORT