Heavy Hex Structural Bolt Assembly, A325, Type 1, Heavy ...

1 Page 1 of 3 fastenal Product Standard REV-09 Date: March 8, 2016 Heavy Hex Structural bolt assembly , A325, Type 1, Heavy Hex Nut, ASTM F436 Structural Washer, Plain The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved vendor. Unless otherwise specified, all referenced consensus standards must be adhered to in their entirety.

2 LtThread Length 1 1 3 RadiusNominal Size(inch)EFHRFull Size Body DiameterWidth Across FlatsHead Height Page 2 of 3 fastenal Product Standard REV-09 Date: March 8, 2016 1 1 3 1 SizeFHWidth Across FlatsThickness 1 1 3 1 Specification Requirements: Dimensions: Heavy Hex Structural bolt : ASME Heavy Hex Nut: ASME Structural Washer: ASTM F436, Type 1 Material & Heavy Hex Structural bolt : ASTM F3125, Grade A325, Type 1 Mechanical Properties: Heavy Hex Nut: ASTM A563 Grade C, C3, D, DH or DH3 (ASTM A194 2H is also acceptable).

3 Structural Washer: ASTM F436, Type I; 38-45 HRC. Thread Requirements: Heavy Hex Structural bolt : ASME UNC Class 2A Heavy Hex Nut: ASME UNC & UNF, or UN8 Class 2B Page 3 of 3 fastenal Product Standard REV-09 Date: March 8, 2016 Marking: Heavy Hex Structural bolt : A325 and manufacturer ID. Heavy Hex Nut: Manufacturer ID and Grade as appropriate to mechanical properties noted above per ASTM A563 or ASTM A194. Structural Washer: Manufacturer ID Finish: Light Protective Oil Material Test Reports: The MTR must have documented lot traceability, dimensional results, full chemical test results and full mechanical test results to the specification(s) above.

4 In addition, the MTR shall be in full compliance with fastenal s MTR Requirements.