High current power inductors - Cooper Industries

1 Technical Data 10390 Effective September 2017 Supersedes April 2015 FPV1006 high current power inductorsProduct features Magnetically shielded Inductance range 85 nH to 150 nH current range from 25 A to 81 A mm x mm footprint surface mount package in mm height Ferrite core materialApplications Compatible with Picor Cool- power ZVS Buck and Buck-Boost regulator familiesEnvironmental Data Storage temperature range (component): -55 C to +125 C Operating temperature range: -55 C to +125 C (ambient plus self-temperature rise) Solder reflow temperature: J-STD-020 (latest revision) compliantPbHALOGENHFFREEP icor and Cool- power are trademarks of Vicor Data 10390 Effective September 2017 FPV1006 high current power inductors Specifications Part Number4 OCL1 (nH) 10%Irms2 (A)Isat3 (A)DCR (m ) @ +20 Open Circuit Inductance (OCL) Test Parameters: 100 kHz, Vrms, Adc, +25 C2. Irms: DC current for an approximate temperature rise of 40 C without core loss.

2 Derating is necessary for AC currents. PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the temperature rise. It is recommended that the temperature of the part not exceed +125 C under worst case operating conditions verified in the end Isat : Peak current for approximately 5% rolloff @ +25 C4. Part Number Definition: FPV1006-xxx-R FPV1006 = Product code and size xxx=Inductance value in nH, -R suffix = RoHS compliant Note: Hipot: 250 Vdc minimum for 2 seconds, conductor to coreDimensions (mm)Part marking: FPV1006 xxx, xxx=inductance value in nH, wwllyy= date code, R=revision level Tolerances are unless stated otherwise Soldering surfaces to be coplanar within millimeters DCR measured from point a to point b Do not route traces or vias underneath the information (mm)Supplied in tape and reel packaging, 620 parts per 13 diameter reelRecommended Pad LayoutSchematicDirection of feed3 Technical Data 10390 Effective September 2017 FPV1006 high current power inductors characteristics20%30%40%50%60%70%80%90%1 00%110%002046008100120140% of OCL FPV1006-85-R Idc (A) -40 C+125 C+25 C20%30%40%50%60%70%80%90%100%0110%010203 045006070809100% of OCL FPV1006-125-R Idc (A) -40 C+125 C+25 C20%30%40%50%60%70%80%90%100%110%0010203 4005060708% of OCL Idc (A) -40 C+125 CFPV1006-150-R+25 CEatonElectronics Division1000 Eaton BoulevardCleveland, OH 44122 United 2017 EatonAll Rights ReservedPrinted in USAP ublication No.

3 10390-BU-SB15163 September 2017 Eaton is a registered other trademarks are property of their respective current power inductors Technical Data 10390 Effective September 2017 Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this tsTC -5 CTime 25 C to Peak Time25 CTsminTsmaxTLTPP reheatAMax. Ramp Up Rate = 3 C/sMax. Ramp Down Rate = 6 C/sSolder reflow profileReference JDEC J-STD-020D Profile FeatureStandard SnPb SolderLead (Pb) Free SolderPreheat and Soak Temperature min.

4 (Tsmin)100 C150 C Temperature max. (Tsmax)150 C200 C Time (Tsmin to Tsmax) (ts)60-120 Seconds60-120 SecondsAverage ramp up rate Tsmax to Tp3 C/ Second C/ Second temperature (Tl) Time at liquidous (tL)183 C 60-150 Seconds217 C 60-150 SecondsPeak package body temperature (TP)*Table 1 Table 2 Time (tp)** within 5 C of the specified classification temperature (Tc)20 Seconds**30 Seconds**Average ramp-down rate (Tp to Tsmax)6 C/ Second C/ Second 25 C to Peak Temperature6 Minutes Minutes Max. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum.** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user 1 - Standard SnPb Solder (Tc)Package ThicknessVolume mm3 <350 Volume mm3 350< )235 C220 C C220 CTable 2 - Lead (Pb) Free Solder (Tc)Package ThicknessVolume mm3 <350 Volume mm3 350 - 2000 Volume mm3 >2000< C260 C260 C250 C245 C> C245 C245 C