hIGh-DEnSITy PolyEThylEnE

1 Building essentials for a better tomorrow MEETS AWWA C901, AWWA C906, ASTM D2239, ASTM D2737, ASTM D3035, F714 PolyEThylEnEWATER AnD SEWERhIGh-DEnSITyIIhIGh- density PolyEThylEnE WATERP olyethylene water and Sewer Pipe for Municipal & Industrial ApplicationsMeets AWWA C901 / C906 ASTM D2239, ASTM D2737, ASTM D3035, F714 PolyEThylEnEWATER AnD SEWERhIGh- density high - density PolyEThylEnE water AnD SEWERConTEnTSPRoDuCT DESCRIPTIonPolyEThylEnE water AnD SEWER .. 2 APPlICATIonSPolyEThylEnE water AnD SEWER .. 5 SuRGE DESIGn ..7 ShoRT FoRM SPECIFICATIonS ..8 DIMEnSIonS AnD WEIGhTS ..9 WARRAnTy ..170102030405062hIGh- density PolyEThylEnE WATERrICh hISToryThanks to the support of our loyal customers, and the dedication and hard work from our JM Eagle family mem-bers, JM Eagle continues to be the largest manufacturer of PVC pipe in the united States and in the world.

2 JM Eagle was formed in 1982 following the purchase of eight PVC pipe manufacturing facilities from the Johns-Manville Corporation. over the course of the years, we have expanded our operations through seventeen addi-tional plants in Wharton, TX; Fontana, CA; Batchelor, lA; Meadville, PA; Adel, GA; Buchannon, WV, Columbia, Mo, Cameron Park, CA, hastings, nE, Perris, CA, Sunnyside, WA, Tacoma, WA, Visalia, CA, and now with the addition of three PolyEThylEnE (PE) facilities in Kingman, AZ, Magnolia, AR and Tulsa, are only a few pipe manufacturers in the world that produce both PVC and PE pipe, and we are proud to be one of them. With our modern PE pipe production facilities in north America, we are able to fulfill all of our customers plastic pipe Eagle manufactures high - density PolyEThylEnE (hDPE) water pressure pipe for municipal and industrial water transmission systems.

3 This pipe is available for sizes "-63" in diameter. our hDPE pipe is recognized in the industry for its zero leak rate, high performance, and long life expectancy. They may be manufactured with color striping to identify their application, such as blue stripe for potable water , green stripe for sewer application, and purple stripe for reclaimed LAyInG LenGThSThe standard laying length of hDPE pressure water pipe is 40/50 feet. Smaller size pipe 6" and under can be extrud-ed at continuous coil lengths by request. longer lengths provide convenience in installation and allow for significant cost savings in labor and SPeCIFICATIonSJM Eagle hDPE water pressure pipe is manufactured in accordance with AWWA C901/C906, ASTM D2239, ASTM D2737, ASTM D3035, ASTM F714 and AnSI/nSF 14/61 listed.

4 PRoDuCT DESCRIPTIon high - density PolyEThylEnE water AnD SEWER PIPEFor MUNICIPAL AND INDUSTrIAL water AND SEWEr PIPING SYSTEMS013hIGh- density PolyEThylEnE WATERQUALITy ConTroLJM Eagle takes great pride in the quality and workman-ship of all of our products. JM Eagle quality control pro-grams encompass three critical aspects of the manufac-turing process: the incoming raw material, pipe produc-tion, and finished goods. Incoming material is visually inspected and tested to ensure the material meets all applicable requirements before its release for production. During production, the pipe will be visually examined for any cosmetic defect and pipe samples will be collected for physical verification and testing for compliance. The fin-ished product is subjected to further visual inspection to ensure it has met all the appropriate specifications and packaging requirements.

5 Without exception, JM Eagle pipe is constantly monitored throughout the entire manu-facturing process to ensure that it is produced in accor-dance with all applicable specifications. The JM Eagle Quality Management System is ISo 9001:2000 registered. Copies of the registration certificates are available on our website at CorroSIon reSISTAnCehDPE pipe has excellent corrosion resistance against electrolytic or galvanic corrosion or any known corrosive soil or water condition. you don t have to worry about tuberculation, or the need for costly lining, wrapping, coat-ing or cathodic CAPACITyJM Eagle PolyEThylEnE pipe has a smooth interior provid-ing less drag and a lower tendency for turbulence at high flow. Its superior flow characteristic eliminates scaling and pitting to preserve its form for consistent flow throughout the pipe s entire service life.

6 The C Factor is 150 and the Manning s flow coefficient is . InSTALLATIon CoSThDPE is lightweight, flexible, and comes in long lengths, allowing for easier and convenient installation. Because of its flexible nature, it reduces the use of fittings. hDPE also allows for non-intrusive installation by offering technology such as directional boring, pipe bursting and slip PolyEThylEnE WATERPRoDuCT DESCRIPTIon high - density PolyEThylEnE water AnD SEWER PIPE(ConTInuED)hDPe GrAy SLIP LInInG PIPeJM Eagle manufactures gray slip lining PolyEThylEnE pipe for your rehabilitation and slip lining applications. This new, evolving technology will provide you with lower cost and alleviate problems with today s older and failing pipeline infrastructure. Slip lining is an excellent choice for replac-ing oversized corroded pipe with a smaller diameter pipe and greatly improved carrying capacity.

7 This trenchless process makes it possible to perform extensive municipal water , sewer and industrial pipe repairs rapidly, while caus-ing minimal disturbances. Slip lining saves both time and cost because the existing pipe support structures do not need to be replaced. JM Eagle hDPE slip lining pipe is manufactured in accordance with AWWA C906 and ASTM F714, and is available in both and in either solid gray color, or gray with a colored green stripe. Please refer to Table 4 for pipe PolyEThylEnE WATERProPErTYUNITTEST P roCEDUrETYPICAL vALUEMATErIAL DESIGNATIoN PPI - Tr4Pe 4710 CELL CLASSIFICATIoN ASTM D3350445574 CDENSITYg /cm3 ASTM INDEXg /10minutesASTM D1238 < MoDULUSpsiASTM D790110,000 to < 160,000 TENSILE STrENGTHpsiASTM D6383500 to < 4000 SCG (PENT)hoursASTM F1473> 500 HDB @ F (23 C)psiASTM D28371600 CoLor.

8 Uv STABILIZEr Black with minimum 2%carbon blackBrITTLENESSTEMPErATUrE F ( C )ASTM D746< - 130 HArDNESSS hore DASTM D2240> 60Pe 4710 JM eAGLe h DPe PreSSUre PIPe PrIMAry ProPerTI eSTable 1 Note: Gray Pipe Cell Classification 445574 EThe physical (or chemical) properties of JM Eagle products described herein represent typical average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations. They are supplied as a techni-cal service and are subject to change without notice.* For data, sizes, or classes not reflected in these charts, please contact JM Eagle for high - density PolyEThylEnE water AnD SEWER PIPE026hIGh- density PolyEThylEnE WATERMArkETAPPLICATIoNProDUCTMUNICIPAL/I NDUSTrIAL Underground Potable water Distribution, Mining, Dredging, river / Stream / Lake Crossing, highway Drainage, highway Crossing, oil Patch, Agriculture water Distribution, Landfill / DrAINAGES torm water , Culverts, highway / residential / Agricultural water Collection / SEWErGravity Sewer Systems, Sewer Force Mains, Directional / Green StripeWATEr DISTrIBUTIoNPotable water Systems, water Service / Blue Stripe, Irrigations Systems, Agricultural / rEHABILITATIoNSlip Lining.

9 Pipe / Gray Slip LinerrECLAIMED WATErWater re-processing / Purple StripePErForATED PIPEL andfill Gas Collection, Waste Drainage Systems60 , 90 ,120 , & 180 Perforated / Chemical Mining, Slurry and Tailing Lines, Mineral extract / GEo-THErMALHEATING / CooLING heating/Cooling Systemfor home and ProTECTIoNSYSTEMSF actory Mutual (FM) eAGLe h DPe MArKeTS AnD APPLICATIonSTable 2 APPlICATIonS high - density PolyEThylEnE water AnD SEWER PIPE(ConTInuED)7hIGh- density PolyEThylEnE WATERSuRGE DESIGnSUrGE PrESSUrES IN vArIoUS PrESSUrE PIPES urge Pressure refers to the maximum hydraulic transient pressure increase (sometimes called water hammer ) in excess of the operating pressure that is anticipated in the system as the result of sudden changes in velocity of the water column. PolyEThylEnE pipe has excellent water hammer properties and is designed to withstand surge pressure.

10 Table 3 shows the PC ratings, surge allowance, and corresponding allowable sudden velocity change in flow velocity for standard dimen-sion ratios (DR s). For recurrent surges, the allowance is 50% of the PC. For occasional surges, the allowance is 100% of the bl e 3 PreSSUre CLASS AnD SerVICe TeMPerATUrePressure Class (PC) is the design capacity to resist working pressure up to 80 F (27 C) maximum service temperature, with specified maximum allowances for recurring positive pressure surges above working pressure. Table 4 shows the temperature compensation multipliers for applications anticipating higher service bl e 4 SerVICe TeMPerATUreCoMPEnSATIon MulTIPlIERS FoR MAXIMuM ConTInuouSly APPlIED SERVICE TEMPERATuRE.< 80 F< 90 F< 100 F< 110 F< 120 F< 130 F< 140 rECUrrING SUrGE EvENTSoCCASIoNAL SUrGE EvENTSS urge Capacity(psi) Corresponding Sudden velocity Change (fps)Surge Capacity(psi) Corresponding Sudden velocity Change (fps) note that the maximum service temperature is 140 F for pressure applications.