HORIZONTAL PUMPING SYSTEM (HPS) - Rotating Right

1 Head Office:6120 Davies Road, Edmonton, AB T6E : Toll Free: Fax Edmonton Calgary Drayton ValleyHORIZONTAL PUMPINGSYSTEM (HPS)CONVENTIONAL HORIZONTAL PUMPING SYSTEMS (HPS)Since the development of the HORIZONTAL surface PUMPING SYSTEM in the mid 1980s, the design has proven to be a cost-effective alternative to split case, turbine, and positive displacement pump designs in many applications. When compared to these alternate pump types, HPS offer high reliability, reduced capital cost, design flexibility, timely delivery, and minimal Rotating Right HPS DESIGN ADVANTAGESThe SYSTEM is a total redesign from all the typical HPS currently on the market. The majority of the multi stage centrifugal units currently available are an extension of down-hole ESP designs.

2 They utilize staging and standard pump diameters originally designed for down-hole applications with size limitations due to casing Rotating Right product was designed and built specifically for surface applications. We utilize a impeller enclosed in a housing for several different flow rate/differential pressures models. Therefore, reducing the overall footprint of the SYSTEM and creating a more robust design with an increased level of standard package is 3 meters in length (pump barrel), this one housing can accommodate 6 different sizes of staging without changing any outside components. For instance a SYSTEM that was designed to produce 1800m3/day @ a differential pressure of 27 MPA could be changed to a unit that produces 3600m3/day @ a differential pressure of 27 MPA by replacing the internal stages and the resizing the motor.

3 Same housing, head and base, skid (one size for 300-1000HP) and thrust chamber. No change in the footprint of the SYSTEM . The HPS provides a low maintenance, cost effective solution for a range of fluid handling requirements. This product line consists of a range of horizontally-mounted multi-stage centrifugal pumps, designed for high pressure/medium flow rates, and suitable for a wide range of heavy-duty industrial HPS unit consists of a prime mover (typically a two-pole electric motor or diesel engine), thrust bearing chamber, intake assembly, horizontally mounted multi-stage pump, and discharge head all securely mounted on a heavy-duty oilfield skid base. Typical 675 series HPS design vs Rotating Right RR75-210-4 capable of producing1500m3/day @ ~18 MPA differential pressurePump SeriesFlow RateM3/dayMaximumPressure (MPA) Rights standard product line includes: 1:1 Carbide radial support (Radial support every stage).

4 Pump stages designed to absorb a significant amount of the pump thrust within the pump, reducing the overall load on the thrust chamber. The result is a more reliable SYSTEM . Skid design covers 300-1000HP. 2 diameter Inconel shaft and mechanical seal. Local design and manufacture. Small foot print. Energy efficient design. Precision machined heavy wall pump housing maintains a straight individual stage includes carbide radial support and the ability to take, down and up thrust within the pump stage itself. This combined with a thrust chamber with the capability of taking the full load itself, equals a very reliable range of instrumentation and monitoring options are available for the HPS, including pressure, temperature, lube oil level, and vibration transmitters.

5 Flow meters, charge pumps, filtration systems, and back-pressure controls are also available, as part of our turn-key HPS units are available as complete turn-key systems, including piping, valves, and instrumentation, housed in a prefabricated building and delivered to the site. By purchasing from a qualified and experienced single-source vendor, the design, review, and inspection process can be significantly streamlined. In addition Rotating Right can pre-test the complete package improving reliability and start-up performance. Thousands of HPS units are operating around the world in applications as diverse as: Water flooding Brine disposal Mine dewatering Crude oil and NGL transfer Amine circulation systems Power fluid pressurization for subsurface jet pumps CO2 sequestrationEvery Rotating Right HPS unit is custom designed, assembled, and tested to stringent standards at Rotating Right s manufacturing and test facility in Edmonton, Alberta, contact Rotating Right to discuss your specific PUMPING requirements today.

6 (See back of brochure for contact info).OPTIONSA one piece 2 Inconel shaft design is used in the thrust chamber as well as a 2 mechanical seal. This thrust chamber was specifically manufactured to be field serviceable . Complete change-out of the seals and bearings can be done easily in the field in under 4 hours. A reduced overall shaft length and radial support bearings mounted near the mechanical seal running face all lead to reduced vibration and/or axial movement which improves the life cycle of the mechanical modular design and factory-aligned components allows for easy maintenance, and assures minimal downtime should repairs be required. All major components can be exchanged within two to three hours and, with the exception of the motor, do not require re-alignment before the pump is Rotating Right HPS SYSTEM requires just a single seal, on the low-pressure suction end of the pump.

7 A range of highly reliable sealing options are available, including API-compliant cartridge seals and flush plans to suit a range of fluid applications. The Rotating Right HPS SYSTEM utilizes an API-compliant spacer disc coupling to facilitate thrust chamber removal for easy seal maintenance with this SYSTEM there is no need to break and dismantle piping for routine SERVICEABLE180 190 200 210 40 50 60 70 80 90 100 Head (m) Flow Rate (m3/h) RR75- 210 170 180 190 200 210 220 50 60 70 80 90 100 110 120 130 Head (m) Flow Rate (m3/h) RR95- 210 190 195 200 205 210 215 220 70 80 90 100 110 120 130 140 150 Head (m) Flow Rate (m3/h) RR150- 210 190 195 200 205 210 100 110 120 130 140 150 160 170 180 190 Head (m) Flow Rate (m3/h)

8 RR140- 210 190 195 200 205 210 215 220 110 120 130 140 150 160 170 180 190 200 Head (m) Flow Rate (m3/h) RR165- 210 190 195 200 205 210 140 150 160 170 180 190 200 210 220 Head (m) Flow Rate (m3/h) RR190- 210 Rotating Right HPS RANGETURNKEY CUSTOM PACKAGESHPS pumps can be operated with a variable frequency controller to expand their operating range, and several pumps may be installed in parallel for greatly increased flow Davies Road, Edmonton, AB T6E : Toll Free: Fax Edmonton Calgary Drayton ValleyGENERAL INFORMATIONC ompany Name: Location/Field:End User:RFQ / Ref. Person:Contact Email:Contact Phone:Contact Fax:Description of Application:OPERATIONAL DATAV alueUnitFLUID PROPERTIESV alueUnitFlow Rate Required =Fluid Type =Suction Pressure Available =Suspended Solids =Discharge Pressure Required =Type of Solids?

9 Liquid Specific Gravity =Hydrogen Sulphide (H2S) =Fluid Temperature =Chlorides (Cl-) =Liquid Dynamic Viscosity = cPCarbon Dioxide (CO2) =Fluid pH =SITE POWER SUPPLYMECHANICAL SEALA vailable Voltage = VoltsMecahnical Seal Type:Supply Frequency = HzSeal Manufacturer:Controller Type (if required) =External Flush Source Available?Area Electrical Classification =Flush Fluid Temperature =Motor Enclosure Type =API 610 Seal Flush Plan:Site Elevation =Normal Ambient Temp. =MOTOR COUPLINGM otor Manufacturer:Coupling Type:INSTRUMENTATION AND MONITORINGPIPINGD iameterANSI #Suction Pressure:Suction Piping:Discharge PressureDischarge Piping:Vibration Monitoring:Instrument Connections:Bearing Oil Temperature:Bearing Oil Level:HPS Multi-Stage Centrifugal Pump Data SheetMinimum flange size is based on a maximum fluid velocity of 5 ft/sec on suction side, and 10 ft/sec on discharge side.