How to use AMI Windows Flash utility ? the " " file onto desktop of Windows . and executing the " ". below steps, menu bar's " File " pull down menu's " Load BIOS Flash " the ROM file ex." ". " Open " button. " yes ". the machine. 2006 elitegroup computer Systems. All Rights Reserv
4.Restart the machine. © 2006 Elitegroup Computer Systems. All Rights Reserved
Domain:
Source:
Link to this page:
1 How to use AMI Windows Flash utility ? the " " file onto desktop of Windows . and executing the " ". below steps, menu bar's " File " pull down menu's " Load BIOS Flash " the ROM file ex." ". " Open " button. " yes ". the machine. 2006 elitegroup computer Systems. All Rights Reserv
© 2006 Elitegroup Computer Systems. All Rights Reserved. Title: file://C:extra ew_techamiflash.htm Author: saintfu Created Date: 1/22/2007 6:02:10 AM
(3) Press [F1] key to enter BIOS setup when system is boot up. Use the arrows to highlight the item "LOAD OPTIMAL SETTINGS" then press "Enter".
5. Highlight the “Save Changes & Exit Setup” item and press [OK] to confirm the changes (or just press [F10] key). And then the system will reboot to apply the new settings.
To ensure that no other program interferes with the BIOS update p rocess, it is highly recommended to close all other programs before continue.
3/5 (3) The following message will pop up, please close the other programs which are running now & press [OK] to continue. (4) When below window comes up, please hit …
2/3 3. Power on your system & hit [F7] to get the “Boot menu”. (Take H67H2-M mainboard as an example.) 4. Select the device name of …
Picture II: Ex. If you want to clear CMOS, to put a check with Clear CMOS this item. 4. Press File button, and choose Open this item. If your BIOS version don't support WinFlash, it will pop-up warning message as below.
5. Load BIOS file you allocated. Then press Open button when you finish choosing BIOS file. 6. Please double check the update option you want.