IEC 62133, Second Edition Secondary cells and …

1 Page 1 of 26 report No. BA-4786867568-A-1 TRF No. IEC62133B F Test report issued under the responsibility of: TEST report IEC 62133 , Second Edition Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed Secondary cells , and for batteries made from them, for use in portable applications report Number.. : BA-4786867568-A-1 Date of issue .. : 2015-03-31 Total number of pages .. 26 Applicant s name .. :LG CHEM, LTD Address .. :128 YEOUI-DAERO, YEONGDEUNGPO-GU SEOUL 150-721 REPUBLIC OF KOREA Test specification: Standard .. :IEC 62133 : 2012 ( Second Edition ) Test procedure.

2 :CB Scheme Non-standard test :N/A Test report Form No.. :IEC62133B Test report Form(s) Originator .. :UL(Demko) Master TRF .. :Dated 2013-03 Copyright 2013 Worldwide System for Conformity Testing and Certification of Electrotechnical Equipment and Components (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. If this Test report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed.

3 This report is not valid as a CB Test report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. Test item description .. :Rechargeable Li-ion Cell Trade Mark .. : Manufacturer .. :LG CHEM, LTD/ RESEARCH PARK 188 MUNJIRO, YUSEONG-GU, DAEJEON, 305-738, REPUBLIC OF KOREA Model/Type reference .. :INR18650HG2 or HG2 / INR19/66 Ratings .. , 3000mAh Page 2 of 26 report No. BA-4786867568-A-1 TRF No. IEC62133B Testing procedure and testing location: CB Testing Laboratory: Underwriters Laboratories Taiwan Co,. Ltd Testing location/ address .. : 260 Da-Yeh Road 112 Peitou Taipei City, CHINESE TAIPEI Associated CB Testing Laboratory: Testing location/ address.

4 : Tested by (name + signature) .. : Approved by (name + signature) .. : Testing procedure: TMP Testing location/ address .. : Tested by (name + signature) .. : Approved by (name + signature) .. : Testing procedure: WMT Testing location/ address .. : Tested by (name + signature) .. : Witnessed by (name + signature) .. : Approved by (name + signature) .. : Testing procedure: SMT Testing location/ address .. : LG CHEM, LTD/ RESEARCH PARK 188 MUNJIRO, YUSEONG-GU, DAEJEON, 305-738, REPUBLIC OF KOREA Tested by (name + signature) .. : IKHYUN NAM Approved by (name + signature) .. : Richard Jeon Supervised by (name + signature) .. : YunSun Ju Page 3 of 26 report No.

5 BA-4786867568-A-1 TRF No. IEC62133B List of Attachments (including a total number of pages in each attachment): National Differences ( 0 pages) Enclosures (11 pages) Summary of testing: tests performed (name of test and test clause): Continuous charging at constant voltage ( cells ) External short circuit ( cells ) Free fall Thermal abuse ( cells ) Crush ( cells ) Forced Discharge Forced internal short circuit ( cells ) Testing location: LG CHEM, LTD RESEARCH PARK 188 MUNJIRO, YUSEONG-GU, DAEJEON, 305-738, REPUBLIC OF KOREA Summary of compliance with National Differences List of countries addressed: N/A Forced internal short circuit was considered for France, Japan, Korea and Switzerland. No difference for EN 62133 :2013.

6 Page 4 of 26 report No. BA-4786867568-A-1 TRF No. IEC62133B Copy of marking plate The artwork below may be only a draft. The use of certification marks on a product must be authorized by the respective NCBs that own these marks. Page 5 of 26 report No. BA-4786867568-A-1 TRF No. IEC62133B Test item : Classification of installation and use .. :N/A Supply :N/A Recommend charging method declaired by the manufacturer .. :CC/CV Discharge current (0,2 It A) .. :600 mA Specified final voltage .. Vdc Chemistry .. : nickel systems .. lithium systems Recommend of charging limit for lithium system Upper limit charging voltage per cell .. Vdc Maximum charging current.

7 :6000 mA Charging temperature upper limit .. :50 C Charging temperature lower limit .. :-10 C Polymer cell electrolyte type .. : gel polymer .. solid polymer Possible test case verdicts: - test case does not apply to the test object .. :N/A - test object does meet the :P (Pass) - test object does not meet the requirement .. :F (Fail) Testing .. : Date of receipt of test item .. :2015-02-25 Date (s) of performance of tests .. :2015-03-09 to 2015-03-30 General remarks: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. "(See Enclosure #)" refers to additional information appended to the report .

8 "(See appended table)" refers to a table appended to the report . Throughout this report a comma / point is used as the decimal separator. Manufacturer s Declaration per sub-clause of IECEE 02: The application for obtaining a CB Test Certificate includes more than one factory location and a declaration from the Manufacturer stating that the sample(s) submitted for evaluation is (are) representative of the products from each factory has been provided .. : Yes Not applicable When differences exist; they shall be identified in the General product information section. Page 6 of 26 report No. BA-4786867568-A-1 TRF No. IEC62133B Name and address of factory (ies) .. :1. LG CHEM LTD. 29, GWAHAKSANEOP 3-RO, OKSAN-MYEON, CHEONGWON-GUN, CHUNGCHEONGBUK-DO KOREA 2.

9 LG CHEM. (NANJING) I&E MATERIALS CO LTD NO. 17 HENGYI RD, NANJING ECONOMICAL & TECHNICAL DEVELOPMENT ZONE, NANJING, JIANGSU, CHINA General product information: The product was investigated to the following additional standards: EN 62133 :2013. The product was complying with the latest version of IEC 62133 :2012(2nd Edition ), including revisions through revision date June 01, 2013. This cell consists of Positive Electrode, Negative Electrode, Separator and Electrolyte canned by aluminium can. This cell is also investigated to UL 1642. Model Differences: Model INR19/66 is the marking of IEC 62133 requirement for the model, INR18650HG2. Model HG2 is identical to Model INR18650HG2 except for model designation. Page 7 of 26 report No.

10 BA-4786867568-A-1 IEC 62133 Clause Requirement + Test Result - Remark Verdict TRF No. IEC62133B 4 Parameter measurement tolerances P Parameter measurement tolerances P 5 General safety considerations P General P Insulation and wiring Considered in Battery Pack. N/A The insulation resistance between the positive terminal and externally exposed metal surfaces of the battery (excluding electrical contact surfaces) is not less than 5 M N/A Insulation resistance (M ).