INDESTRUCTIBLE - Groz engineering tools pvt ltd

1 Never replace a hammer again!INDESTRUCTIBLEHANDLE HAMMERSGH - 03 INDESTRUCTIBLEHANDLEHAMMERSO utlasts wood & fibreglass handle hammers by thousands of overstrikes!Absorbs impact & vibration, reducing user fatigueProtects user in the event of striking an electrical wireMade from special grade of ozone resistant rubber for use in tough outside environmentsHandles on most head sizes weigh more than the head, allowing user to apply double the torque on any struck surfacelocks head to the handle eliminating loosening or dislodgingSTEEL LOCKING PLATEHI-VISIBILITY HEAD instant identification on any job siteVULCANIZEDRUBBER HANDLEDROP FORGEDHEAD with striking ends induction hardened(50-58 HRC) SPRINGSTEEL BARS9/32" ( mm) dia.

2 Spring steel bars resist overstrike without breakingSTEEL REINFORCED LANYARD HOLEIn our desire to build the world s strongest Sledge hammer , we tested our INDESTRUCTIBLE Handle Sledge hammer against Sledges with different handles. We attached each Sledge to an Electronic drive machine & tested for both Direct & Overstrikes at a strike rate of 80 blows per minuteDIRECT STRIKE TESTOVERSTRIKE TESTWood Handle broke in 450 StrikesFibreglass Handle broke is 7,000 StrikesGROZ INDESTRUCTIBLE Handle Hammers recorded 36,000 blows, with no indication of deformationWood Handle broke in 208 OverstrikesFibreglass Handlebroke in 4,126 OverstrikesGROZ INDESTRUCTIBLE Handle Hammers recorded 36,000 blows, with no indication of deformationOUTSTANDINGDURABILITYSTRIKES ON WOODEN HANDLE450 STRIKES ON FIBRE GLASSHANDLE7,000WE STOPPEDCOUNTING AFTERSTRIKES36.

3 000 The GROZ INDESTRUCTIBLE Handle Hammers come with a 12 month warranty from Invoice Date. These are designed to ensure that the hammer handle will not break/separate from the hammer head under normal wear & tear. Warranty does not cover use of the hammer other than as a hand-held striking tool, nor to breakage/ mushrooming etc. of the hammer headTHE HammersCHIDORDERING INFORmATION01 INDESTRUCTIBLE handle is made up of 4 spring steel bars that run all the way through the handle. Bars are locked with the hammer head using steel locking plates ensuring that the head never gets dislodged. Ergonomic rubber grip handle absorbs vibration and reduces fatigue.

4 Special bonding process ensures that the head never gets loose from the are available in 2 types:Heavy Duty 50-58 HRC Head*Forged from special steel, the hammer head is induction case hardened 50-58 HRC. These hammers are especially useful in demolition work where the struck surface is softer than the hammer headUTILITY Driving in stakes Metal-forming Setting bolts Minor demolition workSoft Face 30 HRC HeadForged from special steel , the hammer head is induction case hardened & then tempered to reduce hardness to within 30-35 HRC. Softer head is designed to mushroom when striking harder base materials. Prevents damage to struck work piecesUTILITY Construction Metal forming Over ground mining Maintenance of cutting toolsSteel Locking Plate4 Spring Steel BarsErgonomic Rubber Grip HandleHeavy Duty 52 HRC HeadSoft Face30 HRC HeadCAT NR.

5 ORD WeigHTHANDle leNgTHlbskginchmmHeAVY DUTY 52 HRC 1 FACe 30 HRC HeADCHID/SF/2. 5 C tO 50 C(14 F tO 122 F)WORKING TEmPERATURE RANGEDo not strike objects harder than 46 HRC. Striking items of a greater hardness is liable to cause fracture or chippingWARNING* BS 876 For material, hardness & performanceSANS INFORmATION02-10 C tO 50 C(14 F tO 122 F)WORKING TEmPERATURE RANGEI ndestructible handle is made up of 6 spring steel bars that run all the way through the handle. Bars are locked with the hammer head using steel locking plates ensuring that the head never gets dislodged. Ergonomic rubber grip handle absorbs vibration and reduces fatigue.

6 Special bonding process ensures that the head never gets loose from the are available in 2 types:Heavy Duty 50-58 HRC Head*Forged from special steel, the hammer head is induction case hardened 50-58 HRC. These hammers are especially useful in demolition work where the struck surface is softer than the hammer head. These are also available with a short handle (12-16" length), especially useful in automotive applicationsUTILITY Driving in stakes Heavy demolition work Construction: fracturing stone & concrete Driving fence posts Police, fire & rescue Rebar work Railroads Bending & shaping metalSteel Locking Plate6 Spring Steel BarsErgonomic Rubber Grip HandleHeavy Duty 52 HRC HeadSoft Face30 HRC HeadCAT NR.

7 ORD WeigHTHANDle leNgTHlbskginchmmHeAVY DUTY 52 HRC HeADSHID/6 NR .ORD WeigHTHANDle leNgTHlbskginchmmSOFT FACe 30 HRC HeADSHID/SF/6/30 not strike objects harder than 46 HRC. Striking items of a greater hardness is liable to cause fracture or chippingWARNING* Soft Face 30 HRC Head: Forged from special steel, the hammer head is induction case hardened & then tempered to reduce hardness to within 30-35 HRC. Softer head is designed to mushroom when striking harder base materials. Prevents damage to struck work Construction Agriculture Automotive Overground mining Railroad Maintenance of cutting toolsBS 876 For material, hardness & performanceSANS 387 INFORmATION-10 C tO 50 C(14 F tO 122 F)WORKING TEmPERATURE RANGES ledge Hammers - DIN 6475 SHID-DIN03 INDESTRUCTIBLE handle is made up of 6 spring steel bars that run all the way through the handle.

8 Forged steel head is induction case hardened 50-58 HRC. Bars are locked with the hammer head using steel locking plates ensuring that the head never gets dislodged. Ergonomic rubber grip handle absorbs vibration and reduces fatigue. Special bonding process ensures that the head never gets loose from the handle. UTILITY Demolition Driving stakes & rebar Fracturing stone & concrete Driving fence posts Rail road Bending & shaping metalDo not strike objects harder than 46 HRC. Striking items of a greater hardness is liable to cause fracture or chippingWARNINGNEW!Steel Locking Plate6 Spring Steel BarsErgonomic Rubber Grip HandleCONFORmS TODIN 6475 CAT NR.

9 ORD WeigHTHANDle Head Sledge HammersCHID-CUSHID-CUORDERING INFORmATION04 INDESTRUCTIBLE handle is made with spring steel bars that run all the way through the handle. Bars are locked with the hammer head using steel locking plates ensuring that the head never gets dislodged. Ergonomic rubber grip handle absorbs shock & vibration reducing fatigue. Special bonding process ensures that head never gets loose from the handle. hammer head is forged from pure copper for spark free use. Copper head resists sparking & reduces marring of most struck surfacesUTILITY Metal forming Mining Underground coal mining-10 C tO 50 C(14 F tO 122 F)WORKING TEmPERATURE RANGES teel Locking Plate4 - 6 Spring Steel BarsErgonomic Rubber Grip HandleSpark Resistant!

10 CAT NR .ORD WeigHTHANDle SPARKINGNON mARRING85 INFORmATION-10 C tO 50 C(14 F tO 122 F)WORKING TEmPERATURE RANGEB rass Head Sledge HammersSHID-BR05 Steel Locking Plate4 Spring Steel BarsErgonomic Rubber Grip HandleMarResistantHeadIndestructible handle is made with spring steel bars that run all the way through the handle. Bars are locked with the hammer head using steel locking plates ensuring that the head never get dislodgedErgonomic rubber grip handle absorbs shocks & vibration hence reducing fatigueDrop forged brass head is spark resistant. It absorbs impact & reduces damage on the surface being hit. Also it can be used safely in combustible environmentsUTILITY Oil Rigs Gas Industry Automotive applications where the struck surface is softCAT NR.