Transcription of Information Sheet Lintels - Thorverton
1 Information Sheet Lintels Keystone Lintel Typical Lintel Sections 100. mm 100. m 0m mm 25. 100. mm *. 290mm *. 215mm *. 20mm 140mm *. m * * *. 0m 16. 75 * = Faced area mm Arched Lintel - Arch - standard sections as standard sections per Lintels as per Lintels Information Thorverton Stone requires to manufacture a Lintel We need to know the section, the total length and the design that you require. If you would like a chamfer over the opening of the window, we would need to know the preferred length of the chamfer too. For keystone Lintels , the keystone is integral to the lintel and is typically the size shown above.
2 However, other sizes will be made on request. Useful Information All our Lintels are steel reinforced. Please use an independent engineer to verify the load bearing capability before building. Our splayed end Lintels are usually made to have a 50mm bearing each end on the bottom edge. If you prefer them to be made flush with the window opening, please ask. A drip groove is cast in as standard. Should the typical sections shown above not suffice, we will make the Lintels to your specifications on request. seychelles Farm T 01392 851822 W Any advice contained within this Sheet is for Information Upton Pyne F 01392 851833 Registered in England and Wales purposes only.
3 No liability of any kind will be accepted by Exeter EX5 5HY E No. 3530364 Thorverton Stone Company Ltd., it's Directors or employees.
