INSTALLATION AND OPERATIONS MANUAL - Continental …

1 INSTALLATION AND OPERATIONS MANUAL . Refrigerated griddle Stands Refrigerators & Freezers Please fill in the following information for your NEW unit, carefully read the instructions in this MANUAL and file it for future reference. 1-800-523-7138. MODEL NO. Continental Refrigerator SCAN this code to download MANUAL A Division of National Refrigeration SERIAL NO. & Air Conditioning Products, Inc. 539 Dunksferry Road PURCHASED FROM Bensalem, PA 19020-5908. P 215-244-1400. INSTALL DATE F 215-244-9579. TABLE OF CONTENTS. Page Receiving Your New Model .. 3. General Information and Important Operating Facts.

2 3. Serial Data Uncrating Your New 3. INSTALLATION and Location .. 4. Ventilation ..4. Floor Loads ..4. Caster Support Plates ..5. Condensate Removal ..6. Removal of Drawers and Drawer Adjustments ..7. Removal and Replacement of Drawer Cage ..7. Initial Cleaning Procedure .. 8. Start-Up Procedure .. 8. Electrical Connections ..8. Start-Up Checklist ..9. Operation with Mechanical Thermostat .. 9. Thermometer and Adjustment ..9. Refrigeration System and Adjustment ..10. Evaporator Assembly ..10. Freezer System and Adjustment ..10. Operation with Electronic Control .. 11. Electronic Control Display and Buttons.

3 11. Initial Sequence of Operation ..11. How to Calibrate the Electronic Control ..11. How to Change the Anti-Condensate Control ..12. How to Initiate a MANUAL Defrost ..12. How to Change the Defrost Interval ..12. High and Low Temperature Alarm ..12. Electronic Control Error Codes ..12. Maintenance .. 13. Periodic Cleaning Procedure ..13. General Preventative Maintenance ..13. Care and Cleaning of Stainless Parts and Service .. 15. Placing a Service Obtaining Replacement Parts Under Warranty ..15. Obtaining Replacement Compressor Under Warranty ..15. End-of-Life Disposal of Refrigerated Equipment.

4 15. Optional Accessories .. 16. Installing Electric Condensate Dial Thermometer and Calibration ..16. Digital Thermometer and Calibration ..16. Door Adjustment ..17. Hinge Tension Adjustment ..17. Removal and Replacement of Re-Hinging Doors ..18. Installing Legs and Leveling ..18. Remote Set-Up and INSTALLATION Troubleshooting and Servicing Guide .. 20. Wiring Diagrams .. 22. Limited Extended Protection Warranty .. 26. REFRIGERATED griddle STANDS. RECEIVING YOUR NEW MODEL IMPORTANT NOTE: The model and serial number should be noted on the front cover of this MANUAL , in the spaces Congratulations on your purchase of Continental Refrigerator provided.

5 If parts or service are ever needed for your unit, superior foodservice equipment! When your shipment arrives, this information will be required to verify warranty status thoroughly examine the packaging for any punctures, dents or and to properly identify any parts that may be needed. signs of rough handling. It is in your best interest to partially remove or open the shipping container to examine the contents All cabinets must be given sufficient time to reach normal oper- for any missing accessories or concealed damage which may ating temperature before placing any food inside cabinet or pans have occurred during shipment.

6 If the cabinet is damaged, it (if equipped). For refrigerators, approximately 1 hour of opera- must be noted on the carrier's delivery slip or bill of lading tion is required to lower the cabinet and pan temperature to 40 F. and a Freight Claim must be filed with the shipping company. (4 C). Freezers require approximately 2 hours of operation to FREIGHT DAMAGE IS NOT COVERED UNDER WARRANTY. lower the cabinet temperature to 0 F (-18 C) (see Operation . section for further information). GENERAL INFORMATION AND. IMPORTANT OPERATING FACTS Prior to factory shipping, all products are performance-run tested for a minimum of 12 hours providing a highly sophis- This MANUAL has been compiled to aid in the INSTALLATION , opera- ticated temperature recording exclusive to each individual tion and maintenance of your new equipment.

7 Please take the cabinet. This recording is supplied within this MANUAL packet. A. time to read it and familiarize yourself with your equipment and final evaluation, including analysis of cabinet performance, leak its operation, to enjoy optimum performance. check, vibration, noise level and visual examination is made by a qualified quality control team to assure a superior product. Continental Refrigerator offers a variety of accessories for your The carrier signs to this effect when they accept the product for model (see Optional Accessories section towards the back shipping. To insure the maximum in safety and sanitation, all of this MANUAL or contact your dealer for more information).

8 Models are listed under applicable Underwriters Laboratories and National Sanitation Foundation standards. SERIAL DATA TAG. A serialized data tag is located inside the machine compartment, on the wall next to the refrigerated compartment (see Figure UNCRATING YOUR NEW MODEL. 1). In addition to identifying the specific product, this label pro- vides important information regarding electrical requirements IMPORTANT: Your equipment should never be transport- ed on legs/casters unless the cabinet bottom is properly and refrigeration charge, as well as agency listings and factory supported. Consult the factory for more information.

9 Contacts. The shipping container should remain on your cabinet to avoid FIGURE 1: Data Tag dents or scratches while transporting to the actual set-up loca- tion. All shelving, accessories and legs or casters are carefully packaged and secured inside your cabinet to prevent damage. After moving unit to its final location, remove all the staples from around the bottom of the crate using a pry bar. Slide the cardboard carton up and off the unit, being careful not to rub against the cabinet. Remove any accessories or boxes on the skid. Dispose of all packaging materials properly. Four (4) bolts secure the cabinet to the wooden skid.

10 The bolts are located at each end on the underside of the skid. In order to remove these bolts, tilt the cabinet backwards and place wooden blocks at each end in order to hold it in its tilted position. Using a socket or open end wrench, remove the bolts and carefully slide the cabinet off of the skid. After skid removal, the cabinet should never be moved without dollies or rollers to avoid dam- age to the cabinet bottom or floor. OPERATIONS MANUAL 3. REFRIGERATED griddle STANDS. IMPORTANT NOTE: Do not under any circumstances, lay IMPORTANT NOTE: your new model on its front or sides. For a brief period of HEAT-GENERATING EQUIPMENT (GRIDDLES, time, you may lay the cabinet on its back, but only when BROILERS, TOASTERS, ETC.)