Example: bachelor of science
Installation Manual - Viega
ASME B16.51: Copper and Copper Alloy Press-Connect Pressure Fittings ASME B31.1: Power Piping ASME B31.3: Process Piping ASME B31.9: Building Service Piping BV: Bureau Veritas Type Approval Canadian Registration Number (CRN): 0A14541.5 A/B/C CSA Low Lead Content DNV GL: Det Norske Veritas Germanischer Lloyd Type Approval
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
PureFlow PEX Tubing Tech Data
www.viega.usAll Viega PureFlow PEX tubing is copper tube size dimension (CTS), SDR-9 wall thickness, and meets the requirements of ASTM F876 and F877. Materials ... Design temperature and pressure ratings for Viega PureFlow PEX are 160 psi @ 73°F, 100 psi @ 180°F, and 80 psi @ 200°F.
Viega MegaPress Fittings
www.viega.usMegaPress fittings with an EPDM seal are not approved for potable water or fuel gas applications. For more specific information on applications for MegaPress, contact Viega Technical Services at 1-800-976-9819. MegaPress ½" to 2" systems are approved for underground use and must be protected against corrosion in accordance
Viega ProPress and MegaPress Systems
www.viega.usViega MegaPress fittings can be installed without fully draining a system before making connections. Viega MegaPress is ideal for new installations or for repairs on existing systems. Suitable for use with Schedule 5 to Schedule 40 carbon steel pipe, the Viega MegaPress system includes more than 400 different engineered fitting configurations ...
Viega ProPress Stainless
www.viega.usViega ProPress systems are state-of-the-art press fitting systems that provide economical and reliable installations for the commercial, industrial, and residential markets. Viega ProPress 304 FKM and ProPress 316 are stainless steel tube, fittings, and valves in copper tube size (CTS) ranging from ½ inch to 4 inches.
Related documents
Shop Fabrication Field Installation/ Piping Repair Partial ...
www.tssa.orgtesting and inspection of the pressure piping system leaving a copy with the owner of the installation and forwarding the ... declare that the described pressure piping system approved under design registration number P#_____ ... supports and flexible hoses before the application of the pressure test.
Regulation and Notes - ABSA the pressure equipment safety ...
www.absa.caregistration of pressure piping systems, centered on a secondary certified review being provided by the design submitter which is verified by audit. AB-532, Design Registration Requirements for Application-Specific Pneumatic Test Procedures This document establishes requirements for pneumatic test procedures that must be registered for
CROSBY J-SERIES DIRECT SPRING PRESSURE RELIEF VALVES
www.emerson.comGENERAL APPLICATION The J-Series pressure relief valve provides ... associated reduction in inlet and discharge piping costs. The JLT design is also capacity certified for gas and vapor service and can be applied in two-phase ... • Canadian Registration Number • Pressure Equipment Directive (2014/68/EU), (ISO-4126-1) (CE) ...
Valves for the industry - PERSTA
www.persta.comPressure and temperature ratings n Pressure rating BW-Ends up to 160 bar n Pressure rating FL up to 160 bar n Temperature rating up to 550 °C Materials n 1.0460 n 1.0566 n 1.5415 only with BW-Ends n 1.7335 n 1.4571 Further materials on request. Design Highlights n Die-forged valve body and bonnet n Seats are hardfaced or welded on
SECTION THREE – CONSTRUCTION CODES - Michigan
www.michigan.govProcess piping • Residential boilers and pressure vessels • Steam and hot water systems • Systems utilizing solar or geothermal energy as an energy source • Ventilating systems • Water heaters . A state mechanical contractor's license is required to secure a mechanical permit for a commercial building.