Example: biology

Installation - Operation Manual

Installation - Operation Manual Bead Baths 74300-706, 74300-714, 74300-720 2 | Page Pictured on front cover, left to right: 74300-706 (6 liter bead bath), 74300-714 (14 liter bead bath), 74300-720 (20 liter bead bath) These bead baths require the use of Lab Armor beads to function properly. The units are not watertight and cannot be used as water baths. 3 | Page Lab Armor Bead Baths 100 120 V oltage Part Number ( Manual ): 4861829 Revised: September 26, 2018 Lab Armor is a brand of Sheldon Manufacturing, INC. Safety Certifications These units are CUE listed by T V S D as general purpose heated baths for professional, industrial, or educational use where the preparation or testing of materials is done at an ambient air pressure range of inHg (75 106 kPa) and no flammable, volatile, or combustible materials are being heated.

The unit comes with an Installation and Operation Manual. 6. Verify that the correct number of accessory items has been included. 7. Carefully check all packaging for accessory ite ms before discarding. Included Accessories . Model Gable Bath Cover Power Cord 74300-706 . 1 ; 1 : 74300-714 1 1 ; 74300-720 . 1 ; 1 . 10 | Page.

Tags:

  Manual, Operations, Installation, Operation manual

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Installation - Operation Manual

1 Installation - Operation Manual Bead Baths 74300-706, 74300-714, 74300-720 2 | Page Pictured on front cover, left to right: 74300-706 (6 liter bead bath), 74300-714 (14 liter bead bath), 74300-720 (20 liter bead bath) These bead baths require the use of Lab Armor beads to function properly. The units are not watertight and cannot be used as water baths. 3 | Page Lab Armor Bead Baths 100 120 V oltage Part Number ( Manual ): 4861829 Revised: September 26, 2018 Lab Armor is a brand of Sheldon Manufacturing, INC. Safety Certifications These units are CUE listed by T V S D as general purpose heated baths for professional, industrial, or educational use where the preparation or testing of materials is done at an ambient air pressure range of inHg (75 106 kPa) and no flammable, volatile, or combustible materials are being heated.

2 CAN/CSA No. 61010-1:2012 CAN/CSA No. 61010-2-010 + R:2009 UL 61010-1:2004 + R:2005-07 + R:2008-10 UL 61010-1:2012 UL 61010A-2-010:2002 EN 61010-1:2010 EN 61010-2-010:2003 4 | Page TABLE OF CONTENTS INTRODUCTION .. 5 Read this Manual .. 5 Safety Considerations and Requirements .. 5 Contacting Assistance .. 6 Engineering 6 Lab Armor Beads Required .. 7 Reference Sensor Device .. 8 RECEIVING YOUR UNIT .. 9 Inspect the Shipment .. 9 Orientation Images .. 10 Record the Data Plate 14 Installation .. 15 Installation Procedure Checklist .. 15 Required Ambient Conditions .. 16 Required Clearances .. 16 Power Source Requirements .. 17 Lifting and Handling .. 18 Leveling .. 18 Install the Bead Bath .. 18 Deionized and Distilled Water .. 19 Installation Cleaning and Disinfecting .. 19 Assemble the Bead Bath Cover .. 20 GRAPHIC SYMBOLS.

3 21 CONTROL PANEL OVERVIEW .. 23 25 Theory of Operation .. 25 Put the Bead Bath into Operation .. 26 Fill With Lab Armor Beads ..27 Set the Over Temperature Limit (OTL) .. 29 Loading Samples .. 30 Validating Application 31 USER MAINTENANCE .. 33 Cleaning and Disinfecting the Bath .. 33 Cleaning and Disinfecting Lab Armor Beads .. 34 Minimizing Contamination Exposure .. 35 Electrical Components .. 35 Calibrate the Temperature Display .. 36 UNIT SPECIFICATIONS .. 41 Weight .. 41 Dimensions .. 41 Capacity .. 42 Temperature .. 42 Power .. 42 PARTS LIST .. 43 APPENDIX .. 45 Accessory Hinged Lid .. 45 5 | Page INTRODUCTION Thank you for purchasing a Lab Armor bead bath. We know you have many choices in today s competitive marketplace when it comes to constant temperature equipment. We appreciate you choosing ours. We stand behind our products and will be here for you if you need us.

4 READ THIS Manual Failure to follow the guidelines and instructions in this user Manual may create a protection impairment by disabling or interfering with the unit safety features. This can result in injury or death. Before using the unit, read the Manual in its entirety to understand how to install, operate, and maintain the unit in a safe manner. Ensure all operators are given appropriate training before the unit begins service. Keep this Manual available for use by all operators. SAFETY CONSIDERATIONS AND REQUIREMENTS Follow basic safety precautions, including all national laws, regulations, and local ordinances in your area regarding the use of this unit. If you have any questions about local requirements, please contact the appropriate agencies. SOPs Because of the range of potential applications this unit can be used for, the operator or their supervisors must draw up a site-specific standard operating procedure (SOP) covering each application and associated safety guidelines.

5 This SOP must be written and available to all operators in a language they understand. Intended Applications and Locations Lab Armor bead baths are intended for constant temperature, general purpose warming applications in professional, industrial, and educational environments. The units are not intended for use at hazardous or household locations. Power Your unit and its recommended accessories are designed and tested to meet strict safety requirements. The unit is designed to connect to a power source using the specific power cord type shipped with the unit. Always plug the unit power cord into a protective earth grounded electrical outlet conforming to national and local electrical codes. If the unit is not grounded properly, parts such as knobs and controls can conduct electricity and cause serious injury. Do not bend the power cord excessively, step on it, or place heavy objects on it.

6 A damaged cord can be a shock or fire hazard. Never use a power cord if it is damaged or altered in any way. Use only approved accessories. Do not modify system components. Any alterations or modifications to your unit not explicitly authorized by the manufacturer can be dangerous and will void your warranty. 6 | Page INTRODUCTION CONTACTING ASSISTANCE Phone hours for Sheldon Technical Support are 6 am 4:30 pm Pacific Coast Time (west coast of the United States, UTC -8), Monday Friday. Please have the following information ready when calling or emailing Technical Support: the model number, serial number, and part number (see page 14). 1-800-322-4897 extension 4, or (503) 640-3000 FAX: (503) 640-1366 Lab Armor 300 N. 26th Ave Cornelius, OR 97113 ENGINEERING IMPROVEMENTS Sheldon Manufacturing continually improves all of its products.

7 As a result, engineering changes and improvements are made from time to time. Therefore, some changes, modifications, and improvements may not be covered in this Manual . If your unit s operating characteristics or appearance differs from those described in this Manual , please contact your SHEL LAB dealer or customer service representative for assistance. 7 | Page INTRODUCTION LAB ARMOR BEADS REQUIRED These aluminum-coated beads are designed to maximize thermal conductivity while still allowing ease of placement for samples. The unit cannot operate as a water or oil bath. Each bead bath unit requires a sufficient volume of beads to fill it to 1 (25 mm) below the top of the bath. This level helps hold laboratory vessels in place while providing optimal temperature stability and uniformity. Recommended Volume of Beads Model Bead Volume 74300-706 5 liters 74300-714 12 liters 74300-720 15 liters See page 43 for ordering information.

8 Bead baths and traditional water baths have slight operational differences. See page 31 for a more detailed explanation. 8 | Page INTRODUCTION REFERENCE SENSOR DEVICE Optional. Must be purchased separately. A reference sensor device is required for calibrating the unit temperature display. Reference devices must meet the following standards: Accurate to at least C The device should be regularly calibrated, preferably by a third party. Temperature Probes Use a digital device with a wire thermocouple probe. Select a thermocouple suitable for the application temperature you will be calibrating at. Why Probes? Reference readings taken outside the tank using wire temperature probes avoid cover openings, which disrupt the unit temperature. Each disruption requires a minimum 1-hour wait to allow the temperature to re-stabilize before continuing.

9 No Alcohol or Mercury Thermometers Alcohol thermometers do not have sufficient accuracy to conduct accurate temperature calibrations. Never place a mercury thermometer in the tank. Always use thermocouple probes. Temperature Reference 9 | Page RECEIVING YOUR UNIT INSPECT THE SHIPMENT When a unit leaves the factory, safe delivery becomes the responsibility of the carrier. Damage sustained during transit is not covered by the manufacturing defect warranty. Save the shipping carton until you are certain the unit and its accessories function properly. When you receive your unit, inspect it for concealed loss or damage to its interior and exterior. If you find any damage to the unit, follow the carrier s procedure for claiming damage or loss. 1. Carefully inspect the shipping carton for damage. 2. Report any damage to the carrier service that delivered the unit.

10 3. If the carton is not damaged, open the carton and remove the contents. 4. Inspect the unit for signs of damage. See the orientation depictions on the next pages as a reference. 5. The unit comes with an Installation and Operation Manual . 6. Verify that the correct number of accessory items has been included. 7. Carefully check all packaging for accessory items before discarding. Included Accessories Model Gable Bath Cover Power Cord 74300-706 1 1 74300-714 1 1 74300-720 1 1 10 | Page RECEIVING ORIENTATION IMAGES Control Panel Tank Interior Gable Cover Gable Cover Handle 74300-720 (20 Liter Bath) 11 | Page RECEIVING Control Panel Gable Cover Gable Cover Handle 74300-714 (14 Liter Bath) 12 | Page RECEIVING Control Panel Gable Cover 74300-706 (6 Liter Bath) 13 | Page RECEIVING Back, All Units Power Cord Inlet with Fuse Holder Data Plate 14 | Page RECEIVING RECORD THE DATA PLATE INFORMATION The data plate contains the unit model number, serial number, and part number.


Related search queries