INSTRUCTION MANUAL - cstsurvey.de

1 INSTRUCTION MANUAL . ILMXT Mini Laser Cross Level Self-Leveling 4. 3. 2. 1. Models 58-ILMXT INSTRUCTION MANUAL 58-ILMXTE. MANUAL de Instrucciones Manuel d' instructions Manuale di Istruzioni Bedienungsanleitung Instru es de Utiliza o 2 ILMXT. 2 1. 4. 3. 3. 4. 2. 1. 5. Fig. 1 6. D 2 3 B. 1 4. C A. Fig. 2. off 1 2 3 4 5. Fig. 3. ILMXT 3. Congratulations, you have purchased the most versatile multi-task laser tool on the market. Level and plumb from floor to ceiling with this self-leveling laser cross level. Project EN bright, self-leveling level and plumb laser chalk lines for instant, accurate reference marks.

2 The ILMXT is a precise alignment tool which projects a vertical (plumb) line and/or a horizontal (level) line at the press of a button. Or use it in MANUAL mode to project laser chalk lines in any orientation. MODELS. 58-ILMXT Self-Leveling Indoor/Outdoor Mini Laser Cross Level 4X Brighter. Includes Laser, Mini Tripod w/Magnet Mount, Strap, and Hard Case. 58-ILMXTE Self-Leveling Indoor/Outdoor Mini-Laser Cross Level 4X Brighter. Includes Laser, Mini Tripod, w/Magnet Mount, Strap, Hard Case, and heavy-rod bracket with Laser Line Detector. Copyright 2006 CST/BERGER, All rights reserved. The information contained herein is proprietary information of CST/BERGER and is subject to change without notice.

3 This document shall not be copied or otherwise reproduced without CST/BERGER's written consent. SAFE OPERATING PROCEDURES. WARNING: Be sure to read and understand all instructions in this MANUAL before using this product. Failure to follow all instructions may result in hazardous radiation exposure, electric shock, fire, and/or bodily injury. CAUTION: Use of controls or adjustments or performance of procedures other than those specified in this MANUAL , may result in hazardous radiation exposure. CAUTION: The use of optical instruments with this product will increase eye hazard. IMPORTANT: The following labels are on your laser tool for your convenience and safety.

4 They indicate where the laser light is emitted by the level. ALWAYS BE AWARE of their location when using the level. Complies with 21 CFR and except for deviations pursuant to Laser Notice No. 50 dated July 26, 2001. Complies with EN 60825-1. ALWAYS make sure that any bystanders in the vicinity of use are made aware of the dangers of looking directly into the laser tool. DO NOT remove or deface any warning or caution labels. Removing labels increases the risk of exposure to laser radiation. 4 ILMXT. DO NOT stare directly at the laser beam or project the laser beam directly into the eyes of others. Serious eye injury could result.

5 DO NOT place the laser tool in a position that may cause anyone to stare into the laser beam intentionally or unintentionally. Serious eye injury could result. DO NOT use any optical tools such as, but not limited to, telescopes or transits to view the laser beam. Serious eye injury could result. ALWAYS remove the batteries when cleaning the laser light aperture or laser lens. DO NOT operate the laser tool around children or allow children to operate the laser tool. Serious eye injury could result. ALWAYS turn the laser tool "OFF" when not in use. Leaving the laser tool "ON" increases the risk of someone inadvertently staring into the laser beam.

6 DO NOT operate the laser tool in combustible areas such as in the presence of flammable liquids, gases or dust. ALWAYS position the laser tool securely. Damage to the laser tool and/or serious injury to the user could result if the laser tool falls. ALWAYS use only the accessories that are recommended by the manufacturer of your laser tool. Use of accessories that have been designed for use with other laser tools could result in serious injury. DO NOT use this laser tool for any purpose other than those outlined in this MANUAL . This could result in serious injury. DO NOT leave laser tool "ON" unattended in any operating mode.

7 ALWAYS repair and servicing must be performed by a qualified repair facility. Repairs performed by unqualified personnel could result in serious injury. DO NOT disassemble the laser tool. There are no user serviceable parts inside. Disassembling the laser will void all warranties on the product. Do not modify the product in any way. Modifying the laser tool may result in hazardous laser radiation exposure. ELECTRICAL SAFETY PROCEDURES. WARNING: Batteries can explode or leak, and can cause injury or fire. To reduce this risk: ALWAYS follow all instructions and warnings on the battery label and package.

8 DO NOT short any battery terminals. DO NOT charge alkaline batteries. DO NOT mix old and new batteries. Replace all of them at the same time with new batteries of the same brand and type. ILMXT 5. DO NOT mix battery chemistries. DISPOSE of batteries per local code. DO NOT dispose of batteries in fire. KEEP batteries out of reach of children. REMOVE batteries if the device will not be used for several months. CERTIFICATIONS. This laser complies with all applicable portions of title 21 of the Code of Federal Regulations set by the Food and Drug Administrations, Center for Devices, and Radiological Health.

9 Complies with 21 CFR and except for devations pursuant to Laser notice No. 50, dated July 26, 2001. This Laser tool has also been tested and complies with the CE certification requirements set forth in the EC regulations 89/336/EEC and EN 61000-6-1 (EN50082-1), EN 61000-6-3 (EN50081-1). and EN 60825-1. ENVIRONMENT PROTECTION. Recycle raw materials & batteries instead of disposing of waste. The unit, accessories, packaging & used batteries should be sorted for environmentally friendly recycling in accordance with the latest regulations. FEATURES. Operating Controls: (Fig. 1). 1.) POWER/MODE Button Switches between mode functions 2.

10 Laser Status Indicator (LED). 3.) Indoor /Outdoor Mode Button For switching between Indoor and Outdoor modes 4.) Indoor/Outdoor Mode Indicator (LED). 5.) Laser Output window 6.) Battery Compartment (located on back of laser.). Heavy Duty magnetically dampened compensator eliminates error by quickly self-leveling the laser. Out-of-leveling range sensor triggers the beams to automatically blinks when the unit is moved out of its 5 self-leveling range. 6 ILMXT. Power / Mode Button: (Fig. 2A). Press and release the POWER/MODE button to turn the laser tool on. Pressing and releasing the POWER/MODE button will cycle through the different projection modes as listed below: 1.