Interference Suppression Film Capacitor - Class Y2 Radial ...

1 MKP338 6 BCcomponents Revision: 23-May-20191 Document Number: 28114 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Suppression film Capacitor - Class Y2 Radial MKP 300 VAC - Line to Ground ApplicationFEATURES AEC-Q200 qualified (rev. C) Robust design Material categorization: for definitions of compliance please see Standard line bypass (between line and ground) Y2 applications Line bypass application for continuous operationSee also application note: For more detailed data and test requirements, contact REFERENCE DATAC apacitance range (E12 series) F to F(preferred values acc. to E6)Capacitance tolerance 20 %, 10 %, 5 %Rated AC voltage300 VAC; 50 Hz to 60 HzPermissible DC voltage1000 VDCC limatic testing Class acc. to IEC 60068-155/105/56/C for product volumes 1750 mm355/105/56/B for volumes 1750 mm3 Maximum application temperature105 CReference standardsIEC 60384-14 ed-4 (2013) and EN 60384-14 IEC 60065 requires pass.

2 Flamm. Class B for volumes > 1750 mm3UL 60384-14 2nd edition; ENEC; CSA E60384-1:14 3rd editionDielectricPolypropylene filmElectrodesMetallized filmConstructionSeries construction (for > 10 mm pitch)Triple construction (for mm and 10 mm pitch)EncapsulationPlastic case, epoxy resin sealed, flame retardant Class UL 94 V-0 LeadsTinned wireMarkingC-value; tolerance; rated voltage; sub- Class ; manufacturer s type designation; code for dielectric material; manufacturer location, year and week; manufacturer s logo or name; safety approvalsDIMENSIONSw dtlPhltMKP338 6 BCcomponents Revision: 23-May-20192 Document Number: 28114 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT OF CATALOG NUMBERNote(1)For detailed tape specification refer to Packaging Information :104 = 10 x 10 = 100 nF(except special numbers)BFC23386 XXX X2222 (*) 3386 XXX X(*) old ordering codeTYPE AND PITCHES338 mm (bent back) mmMULTIPLIER (nF) (numerically)TYPEPACKAGINGLEAD TYPES338 6Y2 Loose in boxLead length mm + 1 mm / - mm (pitch mm and 10 mm)Lead length mm mm (pitch > 10 mm) 20 %BFC2 338 length mm mmBFC2 338 length mm mmBFC2 338 ammo (1)Pitch = mm H = mm; P0 = mmBFC2 338 reelPitch mm only to 15 mm; H = mm BFC2 338 PITCH SIZESON REQUEST338 6Y2 Loose in boxLead length mm + 1 mm / - mm (pitch mm and 10 mm)Lead length mm mm (pitch > 10 mm) 20 % See tables for detail Lead length mm mmLead length mm mm ALTERNATIVE TAPED VERSIONSON REQUEST338 6 Y2 Taped reel (1)Pitch = mm and mm H = mm.

3 P0 = mm; reel diameter = 500 mm 20 % See tables for detail Pitch bent back to mmH = mm; P0 = mm; reel diameter = 500 mmALTERNATIVE REQUEST338 6Y2 Loose in boxLead length mm + 1 mm / - mm (pitch mm and 10 mm)Lead length mm mm (pitch > 10 mm) 10 %See tables for detail 5 %Lead length mm mm 10 % 5 %Lead length mm mm 10 % 5 %Taped ammo (1)Pitch = mmH = mm; P0 = mm 10 % 5 %Taped reel (1)Pitch bent back to mmH = mm; P0 = mm; reel diameter = 500 mm 10 % 5 %Pitch = mm and 10 mmH = mm; P0 = mm; reel diameter = 500 mm 10 % 5 %MKP338 6 BCcomponents Revision: 23-May-20193 Document Number: 28114 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)See Voltage Proof Test for Metalized film capacitors : SPQ = Standard Packing Quantity(1)H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to packaging information: (2)Reel diameter = 365 mm is available on request(3)Weight for short lead product onlySPECIFIC REFERENCE DATADESCRIPTIONVALUER ated AC voltage (URAC)300 VPermissible DC voltage (URDC)1000 VTangent of loss angleat 1 kHzat 10 kHzC 470 nF 10 x 10-4 20 x 10-4 Rated voltage pulse slope (dU/dt)R at 420 VDC100 V/ sR between leads, for C F at 100 V; 1 min> 15 000 M RC between leads, for C > F at 100 V; 1 min> 5000 sR between leads and case; 100 V; 1 min> 30 000 M Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s3400 V; 1 minWithstanding (AC) voltage between leads and case2100 V.

4 1 minMaximum application temperature105 CELECTRICAL DATA AND ORDERING INFORMATION - PITCH mmURAC(V)CAP.( F)DIMENSIONSw x h x l (mm)MASS(g) (3)CATALOG NUMBER BFC2 338 6X XXX AND PACKAGINGLOOSE IN BOXAMMOPACK REEL = 500 mm (1)(2)SHORT LEADSLONG LEADSlt = mm+ 1 mm / - mmlt = mm mmSPQlt = mm mmSPQH = mm;P0 = mmSPQH = mm;P0 = mmSPQ300 PITCH = mm mm; dt = mm mm; C-TOL. = 20 % (URDC = 1000 V) x x x x x x = mm mm; dt = mm mm; C-TOL. = 10 % (URDC = 1000 V) x x x x x x = mm mm; dt = mm mm; C-TOL. = 5 % (URDC = 1000 V) x x x x x x 6 BCcomponents Revision: 23-May-20194 Document Number: 28114 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT SPQ = Standard Packing Quantity(1)H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to packaging information: (2)Reel diameter = 365 mm is available on request(3)Weight for short lead product onlyELECTRICAL DATA AND ORDERING INFORMATION - PITCH 10 mmURAC(V)CAP.

5 ( F)DIMENSIONSw x h x l (mm)MASS(g) (3)CATALOG NUMBER BFC2 338 6X XXX AND PACKAGINGLOOSE IN BOXAMMOPACK REEL = 500 mm (1)(2)SHORT LEADSLONG LEADSlt = mm+ 1 mm /- mmlt = mm mmSPQlt = mm mmSPQH = mm;P0 = mmSPQH = mm;P0 = mmSPQ300 PITCH = mm mm; dt = mm mm; C-TOL. = 20 % (URDC = 1000 V) x x x x x x = mm mm; dt = mm mm; C-TOL. = 10 % (URDC = 1000 V) x x x x x x = mm mm; dt = mm mm; C-TOL. = 5 % (URDC = 1000 V) x x x x x x 6 BCcomponents Revision: 23-May-20195 Document Number: 28114 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT SPQ = Standard Packing Quantity(1)H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to packaging information: (2)Reel diameter = 365 mm is available on request(3)Weight for short lead product onlyELECTRICAL DATA AND ORDERING INFORMATION - PITCH 15 mmURAC(V)CAP.

6 ( F)DIMENSIONSw x h x l (mm)MASS(g) (3)CATALOG NUMBER BFC2 338 6X XXX AND PACKAGINGLOOSE IN BOXAMMOPACK REEL = 500 mm (1)(2)SHORT LEADSLONG LEADSlt = mm mmlt = mm mmSPQlt = mm mmSPQH = mm;P0 = mmSPQH = mm;P0 = mmSPQ300 PITCH = mm mm; dt = mm mm; C-TOL. = 20 % (URDC = 1000 V) x x x x = mm mm; dt = mm mm; C-TOL. = 20 % (URDC = 1000 V) x x x x x x = mm mm; dt = mm mm; C-TOL. = 10 % (URDC = 1000 V) x x x x = mm mm; dt = mm mm; C-TOL. = 10 % (URDC = 1000 V) x x x x x x = mm mm; dt = mm mm; C-TOL. = 5 % (URDC = 1000 V) x x x x = mm mm; dt = mm mm; C-TOL. = 5 % (URDC = 1000 V) x x x x x x 6 BCcomponents Revision: 23-May-20196 Document Number: 28114 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT SPQ = Standard Packing Quantity(1)H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to packaging information: (2)Reel diameter = 365 mm is available on request(3)Weight for short lead product onlyELECTRICAL DATA AND ORDERING INFORMATION - PITCH mmURAC(V)CAP.

7 ( F)DIMENSIONSw x h x l (mm)MASS(g) (3)CATALOG NUMBER BFC2 338 6X XXX AND PACKAGINGLOOSE IN BOXAMMOPACK REEL = 500 mm (1)(2)SHORT LEADSLONG LEADSlt = mm mmlt = mm mmSPQlt = mm mmSPQH = mm;P0 = mmSPQH = mm;P0 = mmSPQ300 PITCH = mm mm; dt = mm mm; C-TOL. = 20 % (URDC = 1000 V) x x x x x x x x = mm mm; dt = mm mm; C-TOL. = 10 % (URDC = 1000 V) x x x x x x x x = mm mm; dt = mm mm; C-TOL. = 5 % (URDC = 1000 V) x x x x x x x x 6 BCcomponents Revision: 23-May-20197 Document Number: 28114 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT SPQ = Standard Packing Quantity(1)H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to packaging information: (2)Reel diameter = 365 mm is available on request(3)Weight for short lead product onlyELECTRICAL DATA AND ORDERING INFORMATION - PITCH mmURAC(V)CAP.

8 ( F)DIMENSIONSw x h x l (mm)MASS(g) (3)CATALOG NUMBER BFC2 338 6X XXX AND PACKAGINGLOOSE IN BOXAMMOPACK REEL = 500 mm (1)(2)SHORT LEADSLONG LEADSlt = mm mmlt = mm mmSPQlt = mm mmSPQH = mm;P0 = mmSPQH = mm;P0 = mmSPQ300 PITCH = mm mm; dt = mm mm; C-TOL. = 20 % (URDC = 1000 V) x x x x x x x x = mm mm; dt = mm mm; C-TOL. = 10 % (URDC = 1000 V) x x x x x x x x = mm mm; dt = mm mm; C-TOL. = 5 % (URDC = 1000 V) x x x x x x x x APPROVALS Y2 VOLTAGE VALUEFILE NUMBERSLINKEN 60384-14 (ENEC)(= IEC 60384-14 ed-4 (2013))300 VAC1 nF to 470 nFENEC16/FI/19 60384-14 2nd edition300 VAC1 nF to 470 E60384-1:14 3rd edition300 VAC1 nF to 470 nFE354331CB-test certificate300 VAC1 nF to 470 ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United 6 BCcomponents Revision: 23-May-20198 Document Number: 28114 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

9 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT UseThe capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoleers are designed for mounting in printed circuit boards by means of automatic insertion machines. For detailed tape specifications refer to packaging information: Method of Mounting to Withstand Vibration and ShockIn order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: For pitches 15 mm capacitors shall be mechanically fixed by the leads For larger pitches the capacitors shall be mounted in the same way and the body clampedSpace Requirements on Printed-Circuit BoardThe maximum space for length (Imax.), width (wmax.), and height (hmax.) of film capacitors to take in account on the printed-circuit board is shown in the drawings: For products with pitch 15 mm, w = l = mm; h = mm For products with 15 mm < pitch, mm, w = l = mm; h = mmEccentricity defined as in drawing.

10 The maximum eccentricity is smaller than or equal to the lead diameter of the product CONDITIONSFor general soldering conditions and wave soldering profile, we refer to the application note: Soldering Guidelines for film capacitors : TemperatureTstg = -25 C to +35 C with RH maximum 75 % without condensationRatings and Characteristics Reference ConditionsUnless otherwise specified, all electrical values apply to an ambient temperature of 23 C 1 C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % 2 %.For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %.CBA116 Eccentricitywmax. = W + hmax. = h + Imax. = I + Seating planeMKP338 6 BCcomponents Revision: 23-May-20199 Document Number: 28114 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT as a function of ambient temperature(typical curve)Tangent of loss angle as a function of frequency(typical curve) Impedance as a function of frequency(typical curve)Resonant frequency as a function of capacitance(typical curve)Max.