Example: tourism industry
Intertherm 50 - AkzoNobel
Feb 04, 2015 · For use at Newbuilding, Maintenance & Repair or On Board Maintenance. INTENDED USES HTA097-Aluminium, HTA099-Black 45% (ISO 3233:1998) 25 microns dry (56 microns wet) 18 m²/litre at 25 microns dft, allow appropriate loss factors Airless Spray, Brush, Conventional Spray, Roller PRODUCT INFORMATION Volume Solids Typical Film Thickness ...
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
Interbond 201 - AkzoNobel
marinecoatings.brand.akzonobel.comNov 06, 2017 · 24 hrs 28 days 18 hrs 28 days 6 hrs 28 days 4 hrs 15 days ... emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation. In North America do so in accordance with instruction in ANSI/ASC Z49.1 "Safety in Welding and ... Safety & Environmental standards and regulations. Prior to use ...
Interlac 665 - AkzoNobel
marinecoatings.brand.akzonobel.comNov 13, 2015 · Marine Coatings. Interlac 665 Alkyd Finish Interlac 665 is not suitable for use on immersed areas. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions. Consult your local International Paint representative for specific recommendations.
Interseal 670HS - AkzoNobel
marinecoatings.brand.akzonobel.comNov 13, 2017 · Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Read and follow all precautionary notices on the Material Safety Data Sheet and ... Vol Pack Vol Pack ... Low Temperature - Global Epoxy Primer Interseal 0 13/11/2017 Interseal 670HS Interseal 670HS - Low ...
Interthane 990 - AkzoNobel
marinecoatings.brand.akzonobel.comMay 25, 2016 · relevant national Health, Safety & Environmental standards and regulations. Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels.
Intergard 740 - AkzoNobel
marinecoatings.brand.akzonobel.comNov 23, 2015 · Consult your International Paint representative for the system best suited for the surfaces to be protected. SYSTEMS AND COMPATIBILITY ... .Areas of breakdown, damage etc., should be prepared to the specified standard (e.g. Sa2½ (ISO 8501-1:2007) and primed prior to the application of Intergard 740 ... For use in Marine situations in North ...
Interzinc 22 - AkzoNobel
marinecoatings.brand.akzonobel.comSep 02, 2016 · Interzinc 22, the surface should be reblasted to the specified visual standard. Surface defects revealed by the blast cleaning process, should be ground, filled, or treated in the appropriate manner. A surface profile of 40-75 microns is recommended. Consult your International Paint representative for specific recommendations. NOTE
Intergard 269 - AkzoNobel
marinecoatings.brand.akzonobel.comMar 11, 2016 · 20 lt 16 lt 20 lt 4 lt 5 lt 5 US gal 4 US gal 5 US gal 1 US gal 1 US gal UNIT SHIPPING WEIGHT (TYPICAL) Unit Size Unit Weight 20 lt 32.9 Kg 5 US gal 68.4 lb Shelf Life 12 months minimum at 25°C. Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition. STORAGE EGA042-Light Grey available in ...
Intershield 300 - AkzoNobel
marinecoatings.brand.akzonobel.comDec 04, 2015 · For use in Marine situations in North America, the following surface preparation standards can be used: SSPC-SP10 in place of Sa2½ (ISO 8501-1:2007) SSPC-SP6 in place of Sa2 (ISO 8501-1:2007) SSPC-SP11 in place of Pt3 (JSRA SPSS:1984) Page 2 of 4 Ref:223 Issue Date:04/12/2015 Marine Coatings
Intergard 821 - AkzoNobel
marinecoatings.brand.akzonobel.comDec 04, 2015 · contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. SURFACE PREPARATIONS ANODE SHIELDS NEWBUILDING/MAJOR REFURBISHMENT Where necessary, remove weld spatter and smooth weld seams and sharp edges. Abrasive blast clean to Sa2½ (ISO 8501-1:2007). If oxidation has occurred between …
Intergard 263 - AkzoNobel
marinecoatings.brand.akzonobel.comMay 12, 2017 · Spot Repair - The Intertuf 262/Intergard 263 system may be used for the spot repair of existing epoxy, coal tar epoxy, chlorinated rubber, vinyl tar and tar-free vinyl substrates. Feathered overlap areas must be kept to a minimum. Consult International Paint. The Intertuf 262/Intergard 263 system is not suitable for repair of bituminous substrates.
Related documents
Stihl FS 110 Owners Instruction Manual
m.stihlusa.combrushcutter, it is important that you read, understand and follow the safety precautions and the operating and maintenance instructions in chapter "Safety Precautions and Working Techniques" before using your trimmer / brushcutter. For further information you can go to www.stihlusa.com. Contact your STIHL dealer or the STIHL
CFORCE 600 - CFMOTO USA
cfmotousa.comNov 09, 2018 · in this owner’s manual. Your manual contains instructions for minor maintenance. Information about major repairs is outlined in the CFMOTO Service Manual. Your CFMOTO dealer knows your vehicle best and is interested in your total satisfaction. Be sure to return to your dealership for all of your service needs during, and after, the warranty ...
COMPANION 3 Series II - Bose
assets.bose.comto the presence of important operating and maintenance instruction in this owner’s guide. Class B emissions This Class B digital apparatu s meets all requirements of the Canadian Interference -Causing Equipment Regulations (Canada only).
OPERATOR S MANUAL
apps.mtdproducts.comIMPORTANT: Some engines are shipped with oil already in the engine, others without oil already in the engine. It is very important to check the oil level before operating the engine and to add oil if necessary. Running the engine with insufficient oil can cause serious engine damage and void the engine warranty Oil Recommendations
USER INSTRUCTION MANUAL
www.free-instruction-manuals.comUSER INSTRUCTION MANUAL Autofill Wall Mount Boilers Redring Warranty 2 Year Parts 2 Year Labour 083329501 - 05/12/13 HELPLINE 0844 372 7766
GENSD7 - Buffalo Tools
www.buffalotools.comGENSD7 7000 Surge Watts/5500 Running Watts Diesel Generator 5 IMPORTANT SAFETY INSTRUCTIONS STOP! Before using this generator and if you have any questions regarding the hazard and safety notices listed in this manual and/or on this
216510 90 H.O. to 300 Evinrude E-TEC
www.operatorsguides.brp.comEasy to Own and Operate • Three-Year Limited Warranty • No Scheduled Dealer Maintenance for Three Years of Normal Recreational Use • No Operational Break-In Procedure
iMark Microplate Absorbance Reader Instruction Manual
www.bio-rad.comiMark Microplate Absorbance Reader Instruction Manual 1 Introduction Description The iMark™ Microplate Absorbance Reader (catalog #168-1130) is an eight-channel, vertical pathlength
STIHL BR 500, 550, 600 Owners Instruction Manual
www.stihlusa.comSTIHL BR 500, 550, 600 WARNING Read Instruction Manual thoroughly before use and follow all safety precautions – improper use can cause serious or fatal injury.
KM 10701 Marine Operators Manual 2.4L4.3L5.7L6.0L6.2L …
www.kemequipment.com3 IMPORTANT DEFINITIONS A WARNING indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury. A CAUTION indicates a potentially hazardous situation that, if not avoided,
Related search queries
STIHL, Instruction, IMPORTANT, Maintenance, Information, Warranty, COMPANION 3 Series II, Maintenance instruction, Emissions, USER INSTRUCTION MANUAL, GENSD7, To 300 Evinrude E-TEC, IMark Microplate Absorbance Reader Instruction, 500, 550, 600 Owners Instruction Manual, KM 10701 Marine Operators Manual