Example: barber
Interzinc - AkzoNobel
May 16, 2017 · Abrasive blast clean to a minimum of SSPC-SP6 or Sa2½ (ISO 8501-1:2007). If oxidation has occurred between blasting and application of Interzinc 52, the surface should be reblasted to the specified visual standard. Surface defects revealed by the blast cleaning process, should be ground, filled, or treated in the appropriate ...
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
Chartek 1709 - AkzoNobel
international.brand.akzonobel.comNov 20, 2017 · Airless Spray Airless Spray Thinner Cleaner Work Stoppages Clean Up Trowel Suitable Typically thinned by up to 5% solvent 15°C (59°F) 25°C (77°F) The above figures are for trowel application. Working pot life is not applicable for plural airless spray application as the product is only mixed at the spray gun, at the point of application.
Interzone 954 - AkzoNobel
international.brand.akzonobel.comAug 21, 2017 · Interzone 954 may be applied to suitably sealed or primed concrete; contact International Protective Coatings for further advice on specification and primers. Interzone 954 can be used as a non-skid deck system by modification with addition of GMA132 (crushed flint) aggregate. Application should then be to a suitably primed surface.
Interline 984 - AkzoNobel
international.brand.akzonobel.comA two component, solvent free chemically resistant heavy duty epoxy phenolic tank lining. DESCRIPTION PRODUCT Interline 984 is intended as a lining for the protection of ferrous and non-ferrous substrates (including concrete).
ISO12944 - AkzoNobel
international.brand.akzonobel.comISO12944 is the industry standard for corrosion protection of steel structures by protective paint systems. Originally released in 1998, the standard is put together by representatives from key countries and companies ... All offshore systems must continue to go through 4,200 hours of cycling testing, which equates to 25 weeks.
Chartek 7 - AkzoNobel
international.brand.akzonobel.comMay 19, 2015 · Chartek 7 is a high performance epoxy intumescent fire protection coating system. DESCRIPTION The product is a high build, two pack material providing excellent durability and combined corrosion and fire protection. Tested and certified by Lloyd's Register (LR) and Det Norske Veritas (DNV) for structural and divisional fire protection. PRODUCT
Epoxy Zinc-Rich
international.brand.akzonobel.comMay 16, 2017 · A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20. PRODUCT DESCRIPTION As a high performance primer to give maximum protection as part of any anti-corrosive coating system for aggressive environments including those found on offshore structures, petrochemical
Interzinc - AkzoNobel
international.brand.akzonobel.comNov 23, 2016 · Inorganic Zinc-Rich Silicate Prior to overcoating, Interzinc 22 must be clean, dry and free from both soluble salts and excessive zinc corrosion products. Surface temperature must always be a minimum of 5°F (3°C) above dew point. When applying Interzinc 22 in confined spaces, ensure adequate ventilation.
Epoxy - AkzoNobel
international.brand.akzonobel.comJun 27, 2017 · A two component epoxy anti-corrosive primer pigmented with zinc phosphate. PRODUCT DESCRIPTION For use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems for use in the offshore, petrochemical, chemical, pulp and paper and bridge industries.
Rapid Recoat Epoxy - AkzoNobel
international.brand.akzonobel.comSep 22, 2015 · A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. PRODUCT DESCRIPTION As a primer for steelwork intended for use in a wide range of aggressive environments, including
Intercure 200HS - AkzoNobel
international.brand.akzonobel.comSep 22, 2015 · This product is intended for use only by professional applicators in industrial situations in accordance with the advice given on this sheet, the Material Safety Data Sheet and the container(s), and should not be used without reference to the Material Safety Data Sheet (MSDS) which International Protective Coatings has provided to its customers.
Related documents
Protecting Workers from the Hazards of Abrasive Blasting ...
www.osha.govAbrasive blasting uses compressed air or water to direct a high velocity stream of an abrasive material to clean an object or surface, remove burrs, apply a texture, or prepare a surface for the application of paint or other type of coating. Employers must protect workers from hazardous dust levels and toxic metals that may be
OSHA CHECKLIST FOR THE CONSTRUCTION INDUSTRY
www.scosha.llronline.comApplication of coating materials (paints, primers) to surfaces, particularly spray application Removal of lead containing coatings (surface preparation operations which involve, abrasive blasting, scraping, grinding, heat gunning etc.) Lead burning Welding, brazing, torch cutting, torch burning, and soldering on or with materials containing lead
Interzinc - AkzoNobel
international.brand.akzonobel.comNov 23, 2016 · Abrasive Blast Cleaning Abrasive blast clean to a minimum of SSPC-SP6 or Sa2½ (ISO 8501-1:2007), (or SSPC-SP10 for optimum performance). If oxidation has occurred between blasting and application of Interzinc 22, the surface should be reblasted to the specified visual standard.
STANDARD ITEM - Naval Sea Systems Command
www.navsea.navy.miltask order during surface preparation and the application or removal of marine coatings. ... media blasting, and steel media blasting equipment is completely removed from the ship. Any media detected outside of the containment or left on the ship must be reported to the SUPERVISOR. 3.1.4 Abrasive blast steel and aluminum plates, shapes, and ...
Common Coating Inspection Practices, Standards & Equipment
cdn.ymaws.comor as needed to support the application of the products ... • Suitable when abrasive blasting is not feasible • Free of all oil, grease, dust, dirt, mill scale, rust, coating, oxides, corrosion products, foreign matter • Min 1 mil profile required. SSPC-SP3 Power Tool Cleaning
HAZARD IDENTIFICATION & RISK ASSESSMENT (HIRA)
rlsdhamal.com14) Sand Blasting / Abrasive Blasting 15) Road Work-Widening Project (Flexible Pavement / BC Pavement) 16) Roof Works 17) Confined Space 18) Radiography 19) Tower Erection and Stringing 20) Working Near IR Track 21) Under Ground Tunnel Work 22) …
Cartridge Filter Overview - Donaldson Company
www.donaldson.comfine and non-fibrous dust and some abrasive dust. High filtration efficiency on very fine particulate of <1 micron Chemical processing, General industrial, Surface blasting, Grinding, Polishing, Powder coating Excellent performance on combination fibrous and non-fibrous dust, and/or agglomerative dust Metallurgical, Chemical and
WATERBORNE AMINE EPOXY V440
media.benjaminmoore.comJul 25, 2018 · abrasive blast all slick, glazed concrete or concrete with laitance. For acid etching, follow all manufacturer’s directions and safety instructions. Rinse thoroughly and allow to dry. Prime concrete with one coat of V155 100% Solid Epoxy Pre-Primer or V156 Moisture Tolerant Fast Set Epoxy Sealer.