Example: barber

IS 1200-3 (1976): Method of Measurement of Building and ...

Disclosure to Promote the Right To InformationWhereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public.

IS : 1200 ( Part III ) - 1976 Indian Standard METHOD 0F MEASUREMENT OF BUILDING AND CIVIL ENGINEERING WORKS PART III BRICKWORK ( Third Revision) 0. FOREWORD 0.1 This Indian Standard ( Part III) (Third Revision ) was adopted by the Indian Standards Institution on 19 July 1976, after the draft

Tags:

  Engineering, Civil, Civil engineering

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of IS 1200-3 (1976): Method of Measurement of Building and ...

1 Disclosure to Promote the Right To InformationWhereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public.

2 ! $ ' + - Satyanarayan Gangaram Pitroda Invent a New India Using Knowledge 0 1 ' 5 Jawaharlal Nehru Step Out From the Old to the New 1 + , 1 + Mazdoor Kisan Shakti Sangathan The Right to Information, The Right to Live ! > 0 B Bhart hari N ti atakam Knowledge is such a treasure which cannot be stolen Invent a New India Using Knowledge IS 1200-3 (1976): Method of Measurement of Building andCivil engineering Works, Part III: Brickwork [CED 44:Methods of Measurement of Works of civil engineering ]IS :1200 ( Partlll) -1976 ( Reaffirmed 1992 ) Indian Standard Method OF Measurement OF Building AND civil engineering WORKS PART III BRICKWORK ( Third Revision ) Third Reprint AUGUST 1993 UDC 69 003 12 : 693 2 _.

3 I _--- 0 Copyrfgghl 1976. BUREAU OF INDIAN STANDARDS MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG NEW DELHI 110002 Gr 3 September 1976 - _s IS r 1200 ( Part III ) - 1976 Indian Standard Method OF Measurement OF Building AND civil engineering WORKS PART III BRICKWORK ( Third Revision) 1 civil Works Measurement Secticd CommitteeJBDC 44 Chairman Representing SHRI 1 . R. VAISE Central Public Works Department Members Snm N. P. ACEARYYA The Commissioner for the Port of Calcutta, Calcutta SHRI K. D. ARCOT Engineers India Limited, New Delhi SHHI T. V. SITARAM ( Alternate ) SHRI B. G. Hindustan Steel Works Construction Ltd, Calcutta &RI J. RAJ ( Alternate ) SERI Institution of Surveyors, New Delhi CHIEF ENGINEER ( R&B ) Public Works Department, Government of Andhra SUPERINTENDINQ ENQINEER Pradesh, Hyderabad ( P&D ) ( Alternate ) SHRI R.

4 K. CHOUDHRY Sxar I. P. PuRI ( Altermate ) Bhakra Management Board, Nangal Township SHRI w. J. DAGAMA Bombay Port Trust, Bombay Sam I. B. DESAI DIRECTOR, IRI Hindustan Construction Co Ltd, Bombay Irrigation Department, Government of Uttar Pradesh, Roorkee DIRECTOR ( RATES & CYSTS ) Central Water Commission, New Delhi Dxncrr~ D~ECTOR ( RATES & %TS ) ( Alternate ) EXECUTIVE E~poruxx~ ( PLA~NINQ & Dxs~a~s), NORTHERN Ministry of Railways RAII~WAY SBRI P. N. GADI SHRI G. V. HINQORANI Institution of Engineers ( India ), Calcutta Gammon India Ltd, Bombay SHRI M. L. JAIN Heavy engineering Corporation Ltd, Ranchi The National Industrial Development Corporatior Ltd, New Delhi SHRI S.

5 L. KATHU~A Sasr V. S~vaamru ( Altcrnafc ) Ministry of Shipping & Transport ( Roads Wing ) ( Continucdan page 2 ) .@ Copyright 1976 BURFAU OF INl@N STANDARDS This publication is protected under the In&y cdplrigt Ati ( XIV of. 1657 ) ana reproduction in whole or in part by any means except with written permission of the publisher shall be deemed to be. an infringement of copyright under the said Act. I IS : 1200 ( Part III ) - 1976 # Confinucdfrom puge i ) Members SHRI H. K. KHOSLA Rejresenting Irrigation Department, Government of Haryana, Chandigarh SHRI S. K. KOQEKAR National Buildings Organization, New Delhi ASSISTANT DIRECTOR ( SR 1 ( AItem& ).

6 SERI V. D. LONDHE Concrete Association of India, Bombay SERI N. C. DUIXAL ( Alternate ) SHRI K. K. MADHOK Builders Association of India, Bombay SIIRI DATTA S. MALIK Indian Institute of Architects, Bombay PROP M. K. GODBOLE ( Alternate ) Smu R. S. MURTHY Engineer-in-Chief s Branch, Ministry of Defence SHRI V. G. PATWARDHAN ( Allernate ) SHRI C. B. PATEL M. N. Dastur & Co Private Ltd, Calcutta SHnI B. c. PATEL ( Altrmafe ) Srtm K. G. SALVI Hindustan Housing Factory Ltd, New Delhi SERI S. K. CEATTERJI ( A&smote ) SHRI P. V. SATHE Public Works Department, Government of Maharashtra, Bombay DR R. B. SINQH SERI S. SRINIV_~~AN SUPERINTENDINO SURVEYOR or WORKS ( AVIATION ) SURVEYOR OF WORKS ( I ) ATTACHED TO SSW ( AVLATION ) ( Alternate) SUPERINTENDINQ SURVEYOR OF Banaras Hindu University, Varanasi Hindustan Steel Ltd.

7 Ranchi Central Public Worhs Department, New Delhi Central Public Works Department, New Delhi WORKS ( I ) SURVEYOR OF WORKS ( I ) ATTACHED TO SSW ( I ) ( Alfcrnate ) SHSI D. AJITEA SIMHA, Director ( Civ Engg ) Director General, BI&,( &-o&o Mumba ) SHRI K. M. MATEUR Deputy Director ( Civ Engg ), BIS IS : 1200 ( Part III ) - 1976 Indian Standard Method 0F Measurement OF Building AND civil engineering WORKS PART III BRICKWORK ( Third Revision) 0. FOREWORD This Indian Standard ( Part III) (Third Revision ) was adopted by the Indian Standards Institution on 19 July 1976, after the draft finalized by the civil Works Measurement Sectional Committeehad been approved by theCivil engineering Division Council.

8 Measurement occupies a very important place in planning and execution of any civil engineering work from the time of first-estimates to final completion and settlement of payments for the project. Methods followed for Measurement are not uniform and considerable differences exist between practices followed by one construction agency and another and also between various Central and State Government departments; While it is recognized that each system of Measurement h,as to be specifically related to the administrative and financial organi- zations within the department responsible for work, a unification of the various systems at technical level has been accepted as very desirable, specially as it permits a wider circle of operation for civil engineering contractors and eliminates ambiguities and misunderstandings arising out of inadequate understanding of various systems followed.

9 Among the various civil engineering items, Measurement of buildings was the first to be taken up for standardization and this standard having provisions relating to all Building works, was first published in 1958 and then revised in 1964. In the course of usage of this standard by various construction agencies in the country, several clarifications and suggestions for modifications were received and as a result of study, the Sectional Committee decided that its scope, besides being applicable to buildings, should be expanded so as to cover civil engineering works like industrial and river valley project works. 3 / pw_--. _ .._^ ^ _-_ is : 1296 ( Part III ) - 1976 Since various trades are not related to one another, the Committee decided that Method of Measurement for each trade as given in IS : 1200- 1964* be issued separately as a different part, which will be helpful to specific users in various trades.

10 This part covering Method of measure- ment of brickwork applicable to Building as well as civil engineering works was, therefore, issued as a second revision in 1970. In the course of use of this standard in the past five years based on suggestions received, certain amendments were issued to this standard. This third revision has been prepared to incorporate these amendments. For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated, expressing the result of a Measurement , shall be rounded off in accordance with IS :2-1960t. The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.


Related search queries