Transcription of Issue T Original Instruction Manual
1 A652 01 880 Issue T OriginalInstruction ManualRV3, RV5, RV8 and RV12 Rotary Vane PumpsA 65X-YY-ZZZPump TypeVariantMotor DescriptionXYYZZZ2 = RV301 to 99903 = 220-240 V, 50/60 Hz, Single phase3 = RV5904 = 100/200 V, 50/60 Hz, Single phase4 = RV8905 = 200-230/380-460 V, 50/60 Hz, Three phase5 = RV12906 = 110-115/120 V 50/60 Hz, Single phase965 = NEMA Bareshaft970 = ISO Bareshaft This product has been manufactured under a quality system registered to ISO9001 Declaration of Conformity We, Edwards, Manor Royal, Crawley, West Sussex, RH10 9LW, UK declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble the technical file, that the product(s) RV Rotary vacuum pumps .
2 A65X YY ZZZ Pump Type Variant Motor Description X YY ZZZ 2 = RV3 01 to 99 903 = 220-240V, 50/60Hz, Single phase 3 = RV5 904 = 100/200V, 50/60Hz, Single phase 4 = RV8 905 = 200-230/380-460V, 50/60Hz, Three phase 5 = RV12 906 = 110-115/120, 50/60Hz, Single phase to which this declaration relates is in conformity with the following standard(s) or other normative document(s) EN ISO 12100-2: 2003 Safety of Machinery.
3 Basic Concepts, General Principles for + A1: 2009 Design. Technical Principals EN1012-2:1996, A1: 2009 Compressors and vacuum pumps . Safety Requirements. vacuum pumps EN61010-1: 2001* Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use. General Requirements EN13463-1: 2009 Non-electrical equipment for use in potentially explosive atmospheres. Basic method and requirements EN13463-5: 2003 Non-electrical equipment for use in potentially explosive atmospheres.
4 Protection by constructional safety c EN60034-1: 2004 Rotating electrical machines. Rating and performance No77: 1995# Motors with inherent overheating protection No100: 2004# Motors and Generators 61010-1-04: 2004 Safety requirements for electrical equipment for measurement, Control and laboratory use Part 1: General requirements UL61010A: 2002 Safety requirements for electrical equipment for measurement, Control and laboratory use Part 1: General requirements UL1004: 1994 Electric Motors * 1-phase pumps only.
5 The pumps comply with EN 61010-1 when installed in accordance with the Instruction Manual supplied with the pumps . # 1-phase pumps only. Canadian Standards Authority and Underwriters Laboratory. and fulfils all the relevant provisions of 2006/42/EC Machinery Directive 2006/95/EC Low Voltage Directive 2004/108/EC Electromagnetic Compatibility (EMC) Directive 94/9/EC ATEX Directive on use in Potentially Explosive Atmospheres Note: This declaration covers all product serial numbers from the date this Declaration was signed onwards.
6 Sia Abbaszadeh, Chief Technical Officer Date and Place P200-00-540 Issue F P200-00-600 Issue E 9 December 2009 Edwards Limited 2011. All rights reserved. Page iEdwards and the Edwards logo are trade marks of Edwards 01 880 Issue TContentsSectionPage1 Introduction .. and definitions .. directive implications .. modes and controls .. selector .. control .. 52 Technical data .. and storage conditions .. characteristics .. data .. and vibration data .. data .. data: single-phase pumps .
7 Data: three-phase pumps .. 153 Installation .. design considerations .. and inspect .. the pump .. the pump with oil .. the motor (bareshaft pumps only) .. installation: single-phase pumps .. and configure the motor .. the pump to your electrical supply .. the direction of rotation .. installation: three-phase pumps .. and configure the motor .. the pump to your electrical supply .. the direction of rotation .. and outlet connections .. the system .. 254 Operation.
8 Directive implications .. materials .. purges .. to use the pump controls .. selector .. control .. procedure .. achieve ultimate vacuum .. pump condensable vapours .. decontaminate the oil .. 31dcs/8784/10/10A652 01 880 Issue TPage ii Edwards Limited 2011. All rights and the Edwards logo are trade marks of Edwards operation .. 325 Maintenance .. information .. plan .. the oil-level .. the oil .. and clean the inlet-filter .. and clean the gas-ballast control.
9 The oil-level sight-glass .. the motor fan-cover and enclosure .. and overhaul the pump .. new blades .. the motor condition .. pump has failed to start .. pump has failed to achieve the specified performance (has failed to reach ultimate vacuum ) .. pump is noisy .. pump surface temperature is above 100 C .. vacuum is not fully maintained after the pump is switched off .. pumping speed is poor .. is an external oil leak .. 406 Storage and disposal ..417 Service and spares.
10 Catchpot .. dust filter .. desiccant trap .. chemical trap .. trap .. mist filter .. adaptor .. oil drain kit .. drain-extension .. nozzle kit .. isolators .. operated gas-ballast valve .. operated pipeline valve .. 468 PFPE-prepared RV pumps .. 499 Bareshaft RV pumps .. 51 Edwards Limited 2011. All rights reserved. Page iiiEdwards and the Edwards logo are trade marks of Edwards 01 880 Issue the motor to the bareshaft pump .. 51 For return of equipment, complete the HS Forms at the end of this RV pump.
