Example: quiz answers
Jim Hendershot
electro magnetic flux generated in the stator iron cross links the Permanent Magnet flux from the rotor ... the surface of the magnet has a great effect on the torque produced of one phase as the rotor rotates. ... CAD and modeling techniques using a Fourier series to express the flux distribution in the air gap
Tags:
Information
Domain:
Source:
Link to this page:
Related documents
II. Synchronous Generators
www.uotechnology.edu.iq• the influence on the magnetic field in the air gap when the phase windings a, b, and c on the stator are connected across a load. • The flux produced by the armature winding reacts with the flux set up by the poles on the rotor, causing the total flux to change. The generator delivers a load at a unity power factor.
PCEL-4302 ELECTRICAL MACHINES-II
www.cet.edu.inthree-phase stator. The stator magnetic field produced in the air gap of the generator induces a magnetic field in the rotor. The flux induced in the rotor will act along the axis of the rotor. Since there is an angle between the stator magnetic field and the rotor magnetic field, a torque will be
LECTURE NOTES
www.iare.ac.inSince the flux pattern is varying sinusoidally in space, as the flux waveform rotates, the flux linkage varies sinusoidally. The rate of variation of this flux linkage will then be equal to the speed of rotation of the air gap flux produced. This sinusoidal variation of the flux linkage produces a sinusoidal induced EMF in the rotor coil.
UNIT-1 SINGLE-PHASE INDUCTION MOTORS
gvpcew.ac.inconnected to the stator winding (it is assumed that there is no starting winding). Let the stator be wound for two poles. When power supply for the stator is switched on, an alternating current flows through the stator winding. This sets up an alternating flux. This flux crosses the air gap and links with the rotor conductors.
AXIAL FLUX ELECTRIC MOTOR - EMWorks
www.emworks.comare usually composed of one stator and one rotor. Typically the electric motors are designed and constructed in order to use the radial flux distribution, of an axial where rotor and stator have a small radial air gap between them - Figure 1. In Axial flux motors, the winding can vary their geometric arrangement according
DESIGN AND MODELLING OF BLDC MOTOR FOR …
www.ijeetc.commaximum flux density specified in the stator teeth, the back iron depth and rotor core and B g, Flux density in the air gap. Power balance between the input powerP i, the mechanical power P m and the windings losses P l is expressed as: (8) i m l P P P Input power is given by, cos (9) i ph rms rms P N V I where, 1 (10) 2 2 3
9.0 GENERATOR, EXCITER, AND VOLTAGE REGULATION
www.nrc.govgap. When the ‘field’ coil is energized to establish a magnetic field/flux in the gap and the armature is then rotated, a voltage is generated in the armature. The slip rings and brushes conduct this voltage out to some load "A." Figure 9-3 shows a blowup of the armature in the gap. As the armature is rotated in its
maxon DC motor
www.maxongroup.comPart 2: Stator - the magnetic circuit Housing: magnetic return path made of magn. steel (iron) guides magnetic field Air gap: the larger the air gap the weaker the magnetic field Permanent magnet: produces the magnetic field with north and south pole on opposite sides.