Example: stock market
Kukdo Epoxy Brochure - TRiiSO
Test Results Testing Items I II Remarks Gloss 104.6 105 60 o Cross-cutting 100/100 100/100 - Impact Resistance Pass Pass 1000g!50Cm *Curing condition : Preheating at 130¼C ! 20 min KD-3013 and KD-4014 Epoxy Resins are bisphenol-A type half-capped epoxy resin, and designed for
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
MATERIAL SAFETY DATA SHEET - Tri-iso
www.tri-iso.comMaterial Name: ADDITIN RC 4211 (M 10.401) 419D/1676S Article Number: 2277033 1 of 8 MATERIAL SAFETY DATA SHEET ADDITIN RC 4211 (M 10.401) 419D/1676S
Baxenden Trixene Blocked Isocyanates - Tri-iso
www.tri-iso.comTri-iso Inc. 2187 New Castle Avenue, Suite 101, Cardiff by the Sea, CA 92007 • Tel: (909) 626-4855 • Fax: (909) 621-9119 Trixene Blocked Isocyanates
Related documents
Techincal Note: Fire-Retardant-Treated (FRT) Plywood
inspectapedia.comThe progress of the flame front of the test material is compared with the progress of the flame front on red oak. The test material is given a rating of 100 if the distance is the same as on the red oak. From the test results, materials are assigned a “Flame Spread Index” that is defined in IBC Section 802 as “a compara-
LIFE SAFETY CODE REQUIREMENTS
www.ndhealth.gova sensitivity test outside the listed and marked sensitivity range must be cleaned and recalibrated or replaced. Documentation of the results of the sensitivity testing is required. AUTOMATIC SPRINKLER SYSTEM. The sprinkler system must be serviced annually. Documentation of the results of the annual service is required. Also, a minimum of 6 spare
Building Code Title 27 Subchapter 5 - New York City
www.nyc.govOct 01, 2004 · rating, or required to be noncombustible, fire-retardant treated, or slow burning, shall be tested under the applicable test procedures specified herein, in accordance with the acceptance requirements of section 27-131 of article seven of subchapter one of …
European Fire Standards
www.eurocobusiness.comThe French test known as the "Bržleur ƒlectrique" - electric burner - is the principal method used not only in France, but also in Belgium, Spain and Portugal. It results in a classification of M1 to M4, with M1 being the highest classification.
IS 1554-1 (1988): PVC insulated (heavy duty) electric ...
law.resource.orgrequirements and tests for tie retardant low smoke ( FRLS ) cables. It is intended to bring out these requirements either as a separate *Recommended current ratings for cables: Part 2 PVC-insulated and PVC-sheathed heavy duty cables. 0.6 In …
INSTALLATION INSTRUCTIONS - Shaw Floors
smartcorefloors.com2. New concrete slabs must be dry. Maximum moisture level per CaCl test method is 8 lbs. per 1000 in 24 hr. Maximum level for ASTM 2170 In-situ Relative humidity test method - 90%. 3. Do not install over concrete with a history of high moisture or hydrostatic conditions. Excessive moisture in the subfloor could