Manual Roller Shades - Lutron Electronics, Inc.

1 SPECIFICATION SUBMITTALPageJob Name:Job Number:Model Numbers: Manual Shade Product Specification085350c 1 RollerManual Roller ShadesA manually-operated shading solution that can enhance the aesthetics of a space, provide glare control, and allow occupants to access daylight and views. Ideal for motorized shading projects that also require Manual Geared clutch provides smooth operation Aluminum tube: no rust stains on the fabric from cut tube ends Covers windows up to 10 ft ( m) wide* Covers windows up to 15 ft ( m) tall**Fabric selection may limit the maximum size of a Lutron myProjects to determine shade size and fabric selection compatibility 3/4 in (19 mm) symmetrical light gaps**At high aspect ratio (tall and narrow) shade sizes, Lutron may increase the size of the light gaps to compensate for the increased probability of telescoping.

2 Operating environment: 32 - 104 F (0 - 40 C); 0% - 90% humidity, non-condensing Covered by Lutron Shading Solutions standard warranty; see: Systems : Lutron Contract Roller Manual Shades must be mounted to blocking or other suitable structural material. It is the responsibility of the installer to choose and install fasteners that are appropriate for the mounting surface such that each shade bracket can support 200 lbs ( kg). For Shades not in the Contract Roller Manual shade family, please contact Lutron for mounting Options: Lutron s Performance Fabric Collection Spec Grade (THEIATM compliant) Solar Screens: a selection of standard and dual-sided solar screen fabrics with tightly controlled fenestration properties and tolerances to maximize glare control Sustainable Solar Screens: a selection of PVC free fabrics which have the combined benefits of traditional solar screens with environmentally friendly and sustainable properties General Purpose Solar Screens: a selection of standard and dual-sided solar screens Blackouts.

3 A selection of standard and dual-sided, light-blocking fabrics for room darkening and blackout applicationsPlease see the Lutron Performance Shading Advisor at for up-to-date Performance Fabric specifications and cords out of children s reach. Shorten cords to prevent reach. Move crib and furniture away -Children can climb furniture to reach more safety information: Blind Cord Can STRANGLE Your Child Gardez toujours les cordons et les cha nettes hors de port e des plus de renseignement sur la s curit : loignez les meubles des cordons et des cha nettes. Un enfant peut grimper sur un meuble pour atteindre les cordons et les cha nettes peuvent s enroulerautour de cou d un enfant et l TRANGLERLa cuerda de la persiana puedeESTRANGULAR a su ni oMantenga las cuerdas fuera del alcance de los ni las cuerdas para evitar el alcance.

4 Mueva lacuna y los muebles Los ni os pueden subir losmuebles para alcanzar las SUBMITTALPageJob Name:Job Number:Model Numbers: Manual Shade Product Specification085350c 2 RollerShade OptionsInsideMountOutsideMountWall/Mulli onMountFloor/SillMountMounting Options Inside mount Outside mountFabric Drop OptionsBottom Bar OptionsRegular rollReverse rollwindow glassDesigner (standard)SealedClutch Operator side: Left or right Tube sizes: in (44 mm) aluminum tube, or in (51 mm) aluminum tube, or in (65 mm) aluminum tube Stainless steel pull-chain ( in [ mm] ball diameter), and chain tensioning safety device includedChain Tensioning Safety DeviceThis shade is equipped with a pre-installed pull-chain tension device (meets ANSI/WCMA safety guidelines), designed to secure and maintain tension on the pull-chain loop.

5 For safe operation of the window treatment, the installer must affix the device in an appropriate location according to the instructions packaged with the : The permanent safety label (actual size 177 8 in x 7 8 in [454 mm x 22 mm]) shown below will be affixed to the window-facing side of the bottom bar in accordance with ANSI/WCMA safety Blind Cord Can STRANGLE Your Child Children can climb furniture to reach cords. Move crib and furniture away. Keep all cords out of children s reach. Attach tension device to wall or floor. Fasteners provided with the tension device may not be appropriate for all mounting surfaces. Use appropriate anchors for the mounting surface SUBMITTALPageJob Name:Job Number:Model Numbers: Manual Shade Product Specification085350c 3 RollerBracket-to-Bracket WidthBracket-to-Bracket in (102 mm) in(19 mm) in(19 mm)Light GapLight GapSystem Dimensions (outside mount, wall/ceiling brackets shown)Installed ShadeNOTE: Bracket-to-bracket width will be automatically reduced by 1/8th inch when inside mount configuration is SUBMITTALPageJob Name:Job Number:Model Numbers: Manual Shade Product Specification085350c 4 RollerWith Optional FasciaSingle MountWith Optional FasciaDual Mount*NOTE: Fascia endcaps add in (3 mm) at each end, beyond the bracket-to-bracket width.

6 When using endcaps for inside-mount, deduct the total in (6 mm) from the bracket-to-bracket width to allow clearance for the endcaps within the window Dimensions (outside mount, fascia brackets shown)Bracket-to-Bracket WidthBracket-to-Bracket in(3 mm)* in(3 mm)* in(3 mm)* in(3 mm)* in(19 mm) in(19 mm) in(19 mm) in(19 mm)Light GapLight GapLight GapLight in(61 mm) in(104 mm) in(127 mm) in(51 mm) in(130 mm) in(102 mm) in(102 mm) in(32 mm) in(102 mm) in(102 mm) in(102 mm) in(32 mm) in(102 mm) in(102 mm) in(102 mm) in(32 mm) in(102 mm)SPECIFICATION SUBMITTALPageJob Name:Job Number:Model Numbers: Manual Shade Product Specification085350c 5 RollerMounting OptionsWall/Ceiling Mount BracketsOptional FasciaPocket Mount (with optional 2 in / 51 mm flap)No Top TreatmentClutch Bracketwith integrated pull-chain guidesIdler Bracketwith integrated idler receiverIdler Bracket shown; Clutch Bracket dimensions are equalRequires Contract Roller Fascia Bracket Kit (wall/ceiling brackets are not compatible)With Side ChannelWith Optional Fascia or Pocket Mount**NOTE: When both optional fascia and side channel are configured with the shade, Lutron will notch the fascia for pull-chain clearance.

7 When the fascia or side channel are ordered as separate trim pieces, Lutron will not notch the fascia and it is the responsibility of the installer to add the necessary pull-chain : WhiteFascia/End Cap Finishes: White Black Bronze SilverPocket Finishes: White Black Bronze SilverNOTE: Each clutch bracket is shipped with the integrated pull-chain routing guide pre-installed. It is the responsibility of the shade installer to route the pull-chain appropriately for the application, as shown below:Pull-Chain in(168 mm) in(168 mm) in(168 mm) in(147 mm) in(147 mm) in(59 mm) in(185 mm)Dual Bracket in(178 mm)2 in(51 mm) in(279 mm)SPECIFICATION SUBMITTALPageJob Name:Job Number:Model Numbers: Manual Shade Product Specification085350c 6 RollerDual MountingDual Shade Wall/Ceiling/Pocket Mount BracketsPocket Mount (with optional 2 in / 51 mm flap)2 Clutches Left2 Clutches Left2 Pull Chains2 Pull Chains4 Pull Chains2 Clutches Right2 Clutches Left2 Clutches Left2 Clutches Right1 Clutch Left1 Clutch Right**NOTE.

8 In curtain wall applications, Lutron recommends specifying all clutches left or all clutches right to avoid having 4 pull chains hanging close together**NOTE: This combination should be used in applications with side channels. Side channel may only be used for the shade closest to the : Dual Wall/Ceiling/Pocket brackets are not directly interchangeable with Dual Fascia-Mount brackets on the following pageFinish: WhitePocket Finishes: White Black Bronze in(168 mm) in(168 mm) in(168 mm) (150 mm) in(150 mm) in(59 mm) in(203 mm) in(168 mm) in(168 mm) in(168 mm) (150 mm) in(150 mm) in(59 mm) in(203 mm) in(168 mm) in(168 mm) in(168 mm) (150 mm) in(150 mm) in(59 mm) in(203 mm) in(168 mm) in( mm) in (27 mm) in( mm) in( mm) in( mm) in( mm)SPECIFICATION SUBMITTALPageJob Name:Job Number:Model Numbers: Manual Shade Product Specification085350c 7 RollerDual Mounting continuedDual Shade Wall/Ceiling Fascia-Mount BracketsDual FasciaFinish.

9 WhiteRequires Dual Fascia Bracket Kit (brackets shown above; standard brackets are not compatible)FasciaOptional Back Cover(inverted fascia, wall or ceiling mounted)Securing Screw Location(see important note at right)WINDOWROOMO ptional EndcapsFascia/End Cap Finishes: White, Black, Bronze, SilverIMPORTANT: Fascia snaps onto the shade brackets and includes the the added security of one (1) screw at each end. When fascia is cut to length by Lutron , the required screw holes are provided. When bulk fascia is cut by the installer, the required holes must be added as shown : In recess-mount and other limited-clearance applica-tions, 1 in (25 mm) of clearance is required in front of the bracket for installation of Lutron is a trademark of Lutron Electronics Co., Inc., registered in the and other : Dual Fascia-Mount brackets are not directly interchangeable with Dual Wall/Ceiling/Pocket brackets on the previous pageShade upper limits must be set so that the bottom bars are not drawn up into the brackets.

10 Bottom bars must stay below the dotted line as shown.