Material Safety Data Sheet - AeroCoat

1 Of printingAkzo Nobel Coatings Inc. encourages and expects you to read and understand this entire MSDS, as there is important informationthroughout the document. Further, Akzo Nobel Coatings Inc. expects you to follow the precautions identified in this document unlessyour use conditions would necessitate other appropriate methods or promote safe handling, each customer or recipient should: 1) Notify its employees, agents, contractors, and others whom it knowsor believes will use this Material of the information contained in this MSDS and any other information regarding hazards and Safety ; 2)Furnish this same information to each of its customers for the product; 3) Request its customers to notify their employees, customers,and other users of the product of this information; and 4) Notify its employees, agents, contractors, and others that the precautionsidentified for this product and any other products with which mixtures may be created are transferable and cumulative to the 1 (800) 424-9300 (Inside the US)IN CASE OF EMERGENCY (HEALTH OR SPILLS):CHEMTREC International +1 (703) 527-3887 (Outside the US, collect calls accepted)Product code10P20-13:Product name10P20-13_High Solids Epoxy PrimerFor the most recent update to this Material Safety Data Sheet , visit our website at additional information call (847) Nobel Coatings, East Water StreetWaukegan, IL 60085 USA+1(847) 625-4200 ManufacturerDate of ::::Section 1.

2 Chemical product and company identificationProduct use:Coatings or Coatings Component10P20-13_High Solids Epoxy PrimerCode:10P20-13 AkzoNobelAutomotive and Aerospace CoatingsMaterial Safety Data SheetEmergency overviewPotential acute health effectsIrritating to respiratory irritating to eyes. Risk of serious damage to if to !FLAMMABLE LIQUID AND VAPOR. HARMFUL IF SWALLOWED. CAUSESRESPIRATORY TRACT, EYE AND SKIN IRRITATION. CONTAINS Material THATMAY CAUSE TARGET ORGAN DAMAGE, BASED ON ANIMAL DATA. CANCERHAZARD - CONTAINS Material WHICH CAN CAUSE CANCER.:::::Section 2. Hazards identificationPotential chronic health effectsChronic effects:Contains Material that may cause target organ damage, based on animal Nobel Coatings : 2/11 Product code:10P20-13 Section 2. Hazards identificationSee toxicological information (Section 11)Medical conditionsaggravated by over-exposurePre-existing disorders involving any target organs mentioned in this MSDS as being atrisk may be aggravated by over-exposure to this product.

3 :Carcinogenicity:Contains Material which can cause cancer. Risk of cancer depends on duration andlevel of :No known significant effects or critical :No known significant effects or critical effects:No known significant effects or critical effects:No known significant effects or critical signs/symptomsIngestion:No specific :Adverse symptoms may include the following:irritationrednessEyes:Adverse symptoms may include the following:pain or irritationwateringrednessInhalation:Adve rse symptoms may include the following:respiratory tract irritationcoughingTarget organs:Contains Material which may cause damage to the following organs: blood, kidneys,lungs, the nervous system, liver, peripheral nervous system, gastrointestinal tract,cardiovascular system, upper respiratory tract, skin, central nervous system (CNS), eye,lens or cornea, nose/sinuses, testes, : Reports have associated repeated and prolonged OVEREXPOSURE to solvents with permanent brain andnervous system damage.

4 Intentional misuse by deliberately concentrating and inhaling the contents of this package may beharmful or chromate7789-06-225 - 40 SILICIUMDIOXIDE, CRYSTALLINE QUARTS14808-60-710 - 25 MODIFIED BISPHENOL A BASED RESIN25068-38-610 - 254-methylpentan-2-one108-10-15 - 10heptan-2-one110-43-05 - 10 Titanium dioxide13463-67-75 - 10reaction product: bisphenol a-(epichlorhydrin)25068-38-61 - 5 Xylene1330-20-71 - 5trimethylolpropane triacrylate15625-89-51 - - 1 NameCAS number% by weightSection 3. Composition/information on ingredientsThere are no additional ingredients present which, within the current knowledge of the supplier and in theconcentrations applicable, are classified as hazardous to health or the environment and hence require reporting inthis Nobel Coatings : 3/11 Product code:10P20-13 Wash out mouth with water.

5 Do not induce vomiting unless directed to do so by medicalpersonnel. Never give anything by mouth to an unconscious person. Get medicalattention for and remove any contact lenses. Immediately flush eyes with plenty of waterfor at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medicalattention case of contact, immediately flush skin with plenty of water for at least 15 minuteswhile removing contaminated clothing and shoes. Wash clothing before reuse. Cleanshoes thoroughly before reuse. Get medical attention exposed person to fresh air. If not breathing, if breathing is irregular or ifrespiratory arrest occurs, provide artificial respiration or oxygen by trained tight clothing such as a collar, tie, belt or waistband. Get medical 4. First aid measuresEye contactSkin contactInhalationIngestionNo specific treatment.

6 Treat symptomatically. Contact poison treatment specialistimmediately if large quantities have been ingested or to physician:::::Protection of first-aiders:No action shall be taken involving any personal risk or without suitable training. If it issuspected that fumes are still present, the rescuer should wear an appropriate mask orself-contained breathing apparatus. It may be dangerous to the person providing aid togive mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with waterbefore removing it, or wear dry chemical, CO2, water spray (fog) or 5. Fire-fighting measuresExtinguishing mediaSpecial remarks on firehazardsSpecial remarks onexplosion hazardsPromptly isolate the scene by removing all persons from the vicinity of the incident ifthere is a fire. No action shall be taken involving any personal risk or without suitabletraining.

7 Move containers from fire area if this can be done without risk. Use waterspray to keep fire-exposed containers liquid. In a fire or if heated, a pressure increase will occur and the containermay burst, with the risk of a subsequent explosion. Runoff to sewer may create fire orexplosion protectiveequipment for fire-fightersFire-fighters should wear appropriate protective equipment and self-contained breathingapparatus (SCBA) with a full face-piece operated in positive pressure mode.:::Special exposure hazards:Do not use water :Not suitable:Hazardous thermaldecomposition products:Decomposition products may include the following materials:carbon dioxidecarbon monoxidehalogenated compoundsmetal oxide/oxidesFlammability of the product:Not action shall be taken involving any personal risk or without suitable surrounding areas.

8 Keep unnecessary and unprotected personnel fromentering. Do not touch or walk through spilled Material . Shut off all ignition sources. Noflares, smoking or flames in hazard area. Do not breathe vapor or mist. Provideadequate ventilation. Wear appropriate respirator when ventilation is inadequate. Puton appropriate personal protective equipment (see Section 8).Section 6. Accidental release measuresPersonal precautions:Akzo Nobel Coatings : 4/11 Product code:10P20-13 Section 6. Accidental release measuresStop leak if without risk. Move containers from spill area. Approach release fromupwind. Prevent entry into sewers, water courses, basements or confined areas. Washspillages into an effluent treatment plant or proceed as follows. Contain and collectspillage with non-combustible, absorbent Material sand, earth, vermiculite ordiatomaceous earth and place in container for disposal according to local regulations(see section 13).

9 Use spark-proof tools and explosion-proof equipment. Dispose of viaa licensed waste disposal contractor. Contaminated absorbent Material may pose thesame hazard as the spilled product. Note: see section 1 for emergency contactinformation and section 13 for waste precautions:Avoid dispersal of spilled Material and runoff and contact with soil, waterways, drainsand sewers. Inform the relevant authorities if the product has caused environmentalpollution (sewers, waterways, soil or air).Large spill:Stop leak if without risk. Move containers from spill area. Dilute with water and mop upif water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry Material andplace in an appropriate waste disposal container. Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal spill:Methods for cleaning upStore in accordance with local regulations.

10 Store in a segregated and approved in original container protected from direct sunlight in a dry, cool and well-ventilatedarea, away from incompatible materials (see section 10) and food and drink. Eliminateall ignition sources. Separate from oxidizing materials. Keep container tightly closedand sealed until ready for use. Containers that have been opened must be carefullyresealed and kept upright to prevent leakage. Do not store in unlabeled containers. Useappropriate containment to avoid environmental on appropriate personal protective equipment (see Section 8). Eating, drinking andsmoking should be prohibited in areas where this Material is handled, stored andprocessed. Workers should wash hands and face before eating, drinking and contaminated clothing and protective equipment before entering eating exposure - obtain special instructions before use.