MATERIAL SAFETY DATA SHEET Complies with OSHA …

1 Page 1 of 6 Part Number(s): 19-158, 19-159 MATERIAL SAFETY data SHEETC omplies with OSHA Hazard Communication Standard 29 CFR Name: SILICONE SEALANT/ADHESIVE1801 Morgan StreetRockford, IL 61102 Phone: (815) 968-9661 Fax: (815) 968-9731 Number: 275 Revision Date: 01/29/2013 Supersedes Date: 02/19/2010 Product Type: Solvent Release Adhesive RTVP roduct Name: SILICONE SEALANT/ADHESIVEPart Number(s): 19-158 19-159 Emergency Contact: ChemtrecPhone: (800) 424-9300 SECTION 1. PRODUCT AND COMPANY IDENTIFICATIONHMIS III RATINGSH ealth: 1 Flammability: 0 Physical Hazard: 1 HMIS uses a numbering scale ranging from 0 to 4 to indicate the degree of hazard. A value of zero means that the substance possesses essentially no hazard; a rating of four indicates high hazard.

2 Single or Mixture: MixtureChemical Identification: Organopolysiloxane mixtureHazard Component(s)/(CAS NO.): No hazardous materials present(See Section 8 of this MSDS for Exposure Guideline)SECTION 2. COMPOSITIONH azards Classification: None (based on IMO)Fire and Explosion Not considered flammable nor combustible, but will burn if involved in a Health Effect Inhalation: Vapor overexposure may cause drowsiness, injure blood and liver, and may irritate eyes, nose and throatSkin Contact: On direct contact uncured product or its vapor may cause slight irritation to Contact: On direct contact uncured product or its vapor may cause slight irritation to : No information is availableSECTION 3. HAZARDS IDENTIFICATIONSECTION 4. FIRST AID MEASURESI nhalation: Remove to fresh airSkin Contact: Immediately remove product from skin with dry cloth or towel, and wash exposed area with detergentEye Contact: Immediately flush with plenty of water for at least 15 minutes and promptly call a physicianIngestion: Wash out mouth with water provided person is conscious.

3 Never give anything by mouth to an unconscious person. Call a physician immediately. MATERIAL SAFETY data SHEETC omplies with OSHA Hazard Communication Standard 29 CFR Name: SILICONE SEALANT/ADHESIVE1801 Morgan StreetRockford, IL 61102 Phone: (815) 968-9661 Fax: (815) 968-9731 Number: 275 Revision Date: 01/29/2013 Supersedes Date: 02/19/2010 Page 2 of 6 SECTION 5. FIRE FIGHTING MEASURESPart Number(s): 19-158, 19-159 SECTION 6. ACCIDENTAL RELEASE MEASURESS teps to be taken in case MATERIAL is released or spilled:Shut off all ignition sourcesContain the spill or up with cardboard or rag and place in Point (method used): Not applicable (Solid)Flammable Limits: Lower: Not determined Upper: Not determinedExtinguishing Media: Foam, dry chemical or carbon dioxide or fine water spraySpecial Fire Fighting Procedure: NoneUnusual fire and explosion Hazard: NoneSECTION 7.

4 HANDLING AND STORAGEP recaution to be taken in handling and storing:Keep container closed when not in in a cool away from heat, sparks and not lay the container on its only with adequate ventilationAvoid contact with eyes and skinKeep out of reach of lens wearers take appropriate precaution* * * * Information about the emptied container * * * *Do not re-use this containerKeep away from heat, sparks and flameDo not puncture or cut this container, and do not weld on or near this container. MATERIAL SAFETY data SHEETC omplies with OSHA Hazard Communication Standard 29 CFR Name: SILICONE SEALANT/ADHESIVE1801 Morgan StreetRockford, IL 61102 Phone: (815) 968-9661 Fax: (815) 968-9731 Number: 275 Revision Date: 01/29/2013 Supersedes Date: 02/19/2010 Page 3 of 6 SECTION 8.

5 EXPOSURE CONTROLS / PERSONAL PROTECTIONPart Number(s): 19-158, 19-159 Boiling Point: Not applicableVapor Pressure: Negligible (25 C)Vapor Density (air=1): >1 Specific Gravity: (25 C)Melting Point: Not applicableEvaporation Rate:<1 (Butyl Acetate=1)Solubility in Water: Not solubleAppearance (color) See CartridgeAppearance (form):PasteOdor:Oxime odorSECTION 9. PHYSICAL AND CHEMICAL PROPERTIESE xposure Guidelines:Vendor Guide; 3ppm (TWA), 10 ppm (STEL)AIHA WEEL*; 10 ppm (TWA)[Methylethylketoxime; decomposed product](*AIHA WEEL = American Industrial Hygiene Association Workplace Environmental Exposure Level)Respiratory Protection (Specific Type): Use air-supplied breathing apparatus unless local exhaust ventilation is adequate or decomposed product is within AIHA guidelineVentilation: Local Exhaust RequiredMechanical (general): Adequate ventilation systemSpecial: UnknownOther: Pay attention to ventilation such as local exhaust, mechanical and/or leave door open for at least 24 hours after Gloves: Plastic Film or rubber glovesOther Protective Clothing or Equipment: Eyewash equipmentWork/Hygienic Practices: Wash hands after away from heat and flameAvoid Contact with eyes and prolonged or repeated skin prolonged breathing vapor.

6 MATERIAL SAFETY data SHEETC omplies with OSHA Hazard Communication Standard 29 CFR Name: SILICONE SEALANT/ADHESIVE1801 Morgan StreetRockford, IL 61102 Phone: (815) 968-9661 Fax: (815) 968-9731 Number: 275 Revision Date: 01/29/2013 Supersedes Date: 02/19/2010 Page 4 of 6 SECTION 10. STABILITY AND REACTIVITY SECTION 11. TOXICOLOGICAL INFORMATIONPart Number(s): 19-158, 19-159 Stability: StableCondition to Avoid: Exposure to air or moisture until ready to use - causes curing and methylethylketoxime vapor to form graduallyIncompatibility ( MATERIAL to Avoid): Water or moistureHazardous Decomposition or By-Product: Water, moisture, or humid air can cause Methylethylketoxime Thermal breakdown of this product during fire or very high heat condition may evolve the following hazardous decomposition product: Carbon oxides and traces of incompletely burned carbon compounds.

7 Silicone dioxide. Nitrogen oxides. FormaldehydeHazardous Polymerization: Will Not OccurConditions to Avoid: NoneSkin Irritation:No information is availableSee OTHER INFORMATIONEye irritation: No information is availableSee OTHER INFORMATIONS ensitization: No information is availableSee OTHER INFORMATIONA cute Toxicity (LD50):No information is availableSee OTHER INFORMATIONA cute Toxicity (LC50) No information is availableSee OTHER INFORMATIONS ubacute Toxicity: No information is availableSee OTHER INFORMATIONC hronic Toxicity:No information is OTHER INFORMATIONC arcinogen:NTP: Not Listed IARC: Not Listed: OSHA Regulated: Not ListedSee OTHER INFORMATIONM utagenicity: No information is availableSee OTHER INFORMATIONO ther Information: Additional InformationMethyl Ethyl Ketoxime (MEKO) Decomposition productMaterial will generate MEKO on exposure to humid air, gradually.

8 Male rodents exposed to MEKO vapor at high concentration throughout their lifetime developed liver cancer. But relevance to humans is uncertain now. Please read the detail information to MEKO Irritation: Causes mild irritation. Can be absorbed through the skinEye Irritation:Causes severe irritationAcute Oral Tox:LD50 (rat) = 4 Inhalation Tox:LC50 (rat) = > mg/l /4 HRInhalation Tox:Shows narcotic action at high concentration. May produce blood effectsSkin Sensitization: Positive (guinea pig)Neurotoxicity: High dose can product transient and reversible change in neurobehavioral function. No evidence of cumulative neurotoxity was :Liver carninomas were observed in a lifetime inhalation study ( years) in which mice and rats were exposed. These carcinomas were statistically increased in males at concentration of 735 ppm.

9 Relevance to humans is uncertain now MEKO MATERIAL SAFETY data SHEETC omplies with OSHA Hazard Communication Standard 29 CFR Name: SILICONE SEALANT/ADHESIVE1801 Morgan StreetRockford, IL 61102 Phone: (815) 968-9661 Fax: (815) 968-9731 Number: 275 Revision Date: 01/29/2013 Supersedes Date: 02/19/2010 Page 5 of 6 SECTION 11. TOXICOLOGICAL INFORMATION (CONTINUED)SECTION 12. ECOLOGICAL INFORMATIONPart Number(s): 19-158, 19-159 Relevance to humans is uncertain now MEKOM utagenicity: Not considered mutagenic based on several in vitro and vivo Chronic Study:Degenerative effects on the olfactory epithelium of nasal passages occurred in a concentration related manner in males and females of mice and rats at MEKO concentration of 15,75 and 375 Environmental Exposure: Exposure Level AIHA WEEL: 10 ppm (TWA)Biodegradation: Not applicableBioaccumulation:No information is availableAquatic Toxicity: No information is availableOther Information:NoneSECTION 13.

10 DISPOSAL CONSIDERATIONCan be land-filled for cured product or burned in a chemical incinerator equipped with an afterburners and scrubberDo not dispose the emptied container all federal, state, and local 14. TRANSPORTATION INFORMATIONUS DOT & CANADA TDG : Not regulated for transportTransport by sea : Not regulated for transportAir transport ICAO- : Not regulated for transport MATERIAL SAFETY data SHEETC omplies with OSHA Hazard Communication Standard 29 CFR Name: SILICONE SEALANT/ADHESIVE1801 Morgan StreetRockford, IL 61102 Phone: (815) 968-9661 Fax: (815) 968-9731 Number: 275 Revision Date: 01/29/2013 Supersedes Date: 02/19/2010 Page 6 of 6 SECTION 15. REGULATORY INFORMATIONPart Number(s): 19-158, 19-159 Toxic Substances Control Act (TSCA) Status: Listed on the TSCA inventory* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *European Inventory Of Existing Commercial Chemical Substances (EINECS) Status:Listed on the EINECSL abeling According To EC-Regulations Required:Symbol: Not requiredR-Phrase: Not requiredS-Phrase: Not requiredContains: NoneSuperfund Amendments and reauthorization to of 1986 (SARA) Title III Section 313 Supplier Notification.