MATERIAL SAFETY DATA SHEET - Smart Lab

1 No: F/QCL/008 INDONESIAMSDS CHLOROFORMPage 1 MATERIAL SAFETY DATA SHEETCHLOROFORMR evision : 02 Date : November 3rd, 2021 MSDS Number : 058 Section 1 - Chemical Product and Company Product Name: CHLOROFORMS ynonyms:Trichloromethane, Methane, Formyl trichloride, Methyl trichlorideCAS No.:67-66-3HS Code:2903 13 00 Molecular g/molChemical Formula:CHCl3 Product Code:A-1022 Manufacturer: IndonesiaAddress:Ruko Boulevard Taman Tekno Blok E ,BSD Sektor XI Serpong,Tangerang - information:Telp: +62-21- 7588 0205(Hunting) , fax:+62-21-7588 Application:General Chemical reagentEmergency Telephone.

2 +62-21-7588 0205(Hunting)Section 2 - Hazards classification of the substance or mixtureClassification according to Regulation (EC) No 1272/2008 Acute toxicity, Oral (Category 4), H302 Acute toxicity, Inhalation (Category 3), H331 Skin irritation (Category 2), H315 Eye irritation (Category 2), H319 Carcinogenicity (Category 2), H351 Reproductive toxicity (Category 2), H361dSpecific target organ toxicity - single exposure (Category 3), Central nervous system, H336 Specific target organ toxicity - repeated exposure (Category 1), Liver, Kidney, H372 Long-term (chronic) aquatic hazard (Category 3), H412 For the full text of the H-Statements mentioned in this Section, see Section Label elementsLabelling according Regulation (EC) No 1272/2008 PictogramSignal wordDangerHazard statement(s)H302 Harmful if skin serious eye if : F/QCL/008 INDONESIAMSDS CHLOROFORMPage 2 MATERIAL SAFETY DATA SHEETCHLOROFORMR evision : 02 Date.

3 November 3rd, 2021 MSDS Number : 058H336 May cause drowsiness or of causing of damaging the unborn damage to organs (Liver, Kidney) throughprolonged or repeated to aquatic life with long lasting statement(s)P201 Obtain special instructions before release to the + P312 + P330IF SWALLOWED: Call a POISON CENTER/ doctor ifyou feel unwell. Rinse + P352IF ON SKIN: Wash with plenty of + P340 + P311IF INHALED: Remove person to fresh air and keepcomfortable for breathing. Call a POISON + P313IF exposed or concerned: Get medical advice/ Hazard Other hazardsThis substance/mixture contains no components considered to be either persistent, bioaccumulative andtoxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of or 3 - Composition, Information on SubstancesSynonyms: TCM, Trichloromethane, Methane trichloride, Methyl trichlorideFormula: CHCl3 Molecular weight: g/molCAS-No.

4 : 67-66-3EC-No.: 200-663-8 Index-No.: 602-006-00-4 Hazardous ingredients according to Regulation (EC) No 1272/2008 ComponentClassificationConcentrationChlo roformCAS-No. 67-66-3EC-No. 200-663-8 Index-No. 602-006-00-4ethanolCAS-No. 64-17-5EC-No. 200-578-6 Index-No. 603-002-00-5 Acute Tox. 4; Acute Tox. 3; Skin ; Eye Irrit. 2; Carc. 2; Repr. 2; STOTSE 3; STOT RE 1; H302, H331, H315,H319, H351, H361d, H336, H372 Concentration limits: 20 %: STOT SE3, H336;Flam. Liq. 2; Eye Irrit. 2; H225, H319 Concentration limits: >= 50 %: EyeIrrit.

5 2A, H319;<=100 %>= 1 - < 10 %For the full text of the H-Statements mentioned in this Section, see Section : F/QCL/008 INDONESIAMSDS CHLOROFORMPage 3 MATERIAL SAFETY DATA SHEETCHLOROFORMR evision : 02 Date : November 3rd, 2021 MSDS Number : 058 Section 4 - First Aid Description of first aid measuresGeneral adviceConsult a physician. Show this SAFETY data SHEET to the doctor in inhaledIf breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a case of skin contactWash off with soap and plenty of water.

6 Take victim immediately to hospital. Consult a case of eye contactFlush eyes with water as a swallowedNever give anything by mouth to an unconscious person. Rinse mouth with water. Consult a Most important symptoms and effects, both acute and delayedThe most important known symptoms and effects are described in the labelling (see section ) and/or insection Indication of any immediate medical attention and special treatment neededNo data availableSection 5 - Firefighting Extinguishing mediaSuitable extinguishing mediaUse water spray, alcohol-resistant foam, dry chemical or carbon Special hazards arising from the substance or mixtureCarbon oxidesHydrogen chloride gasNot Advice for firefightersWear self-contained breathing apparatus for firefighting if Further informationNo data 6 - Accidental Release Personal precautions.

7 Protective equipment and emergency proceduresWear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuatepersonnel to safe areas. For personal protection see section Environmental precautionsPrevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into theenvironment must be : F/QCL/008 INDONESIAMSDS CHLOROFORMPage 4 MATERIAL SAFETY DATA SHEETCHLOROFORMR evision : 02 Date : November 3rd, 2021 MSDS Number : Methods and materials for containment and cleaning upSoak up with inert absorbent MATERIAL and dispose of as hazardous waste.

8 Keep in suitable, closed containersfor Reference to other sectionsFor disposal see section 7 - Handling and Precautions for safe handlingAdvice on safe handlingAvoid contact with skin and inhalation of vapor or measuresAvoid contact with skin, eyes and hands before breaks and immediately after handling the precautions see section Conditions for safe storage, including any incompatibilitiesStorage conditionsKeep container tightly closed in a dry and well-ventilated which are opened must be carefully resealed and kept upright to prevent leakage.

9 Store in classStorage class (TRGS 510): : Non-combustible, acute toxic / toxic hazardous materials orhazardous materials causing chronic Specific end use(s)Apart from the uses mentioned in section no other specific uses are stipulatedSection 8 - Exposure Controls, Personal Control Exposure controlAppropriat engineering controlsAvoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handlingthe protective equipmentEye/face protectionFace shield and SAFETY glasses Use equipment for eye protection tested and approved underappropriate government standards such as NIOSH (US) or EN 166(EU).

10 Skin protectionHandle with gloves. Gloves must be inspected prior to use. Use proper glove removaltechnique (without touching glove's outer surface) to avoid skin contact with this of contaminated gloves after use in accordance with applicable laws and goodlaboratory practices. Wash and dry : F/QCL/008 INDONESIAMSDS CHLOROFORMPage 5 MATERIAL SAFETY DATA SHEETCHLOROFORMR evision : 02 Date : November 3rd, 2021 MSDS Number : 058 The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EECand the standard EN 374 derived from contactMaterial: Fluorinated rubberMinimum layer thickness: 0,7 mmBreak through time: 480 minMaterial tested:Vitoject Splash contactMaterial: Fluorinated rubberMinimum layer thickness: 0,7 mmBreak through time.