MAX202E–MAX213E, ±15kV ESD-Protected, …

1 19-0175; Rev 7; 1/15 MAX202E MAX213E,MAX232E/MAX241E 15kv ESD- protected , 5V RS-232 Transceivers EVALUATION KIT AVAILABLEG eneral DescriptionThe MAX202E-MAX213E, MAX232E, and MAX241E are afamily of RS-232 and transceivers with high 15kVESD HBM protection and integrated charge pump circuit-ry for single +5V supply operation. The various combina-tions of features are outlined in the Selector and receivers for all ten devices meet all EIA/TIA-232E and CCITT specifications at data rates up to120kbps when MAX211E/MAX213E/MAX241E are available in 28-pin SO and SSOP packages.

2 The MAX202E/MAX232 Ecome in 16-pin TSSOP, narrow SO, wide SO, and DIPpackages. The MAX203E comes in a 20-pin DIP/SOpackage, and needs no external charge-pump capaci-tors. The MAX205E comes in a 24-pin wide DIP pack-age, and also eliminates external Battery-Powered Equipment Hand-Held Equipment Portable Diagnostics EquipmentBenefits and Features Saves Board Space Integrated High 15kv HBM ESD Protection Integrated Charge Pump CircuitryEliminates the Need for a Bipolar 12V SupplyEnables Single Supply Operation From +5V Supply Integrated F Capacitors (MAX203E, MAX205E) 24 pin SSOP Package Saves up to 40% Versus SO Package Saves Power for Reduced Power Requirements 1 A Shutdown Mode 15 A Shutdown Mode for MAX213 EPin Configurations and Typical Operating Circuits appear atend of data OF RS-232 DRIVERSNO.

3 OF RS-232 RECEIVERSRECEIVERSACTIVE INSHUTDOWNNO. OFEXTERNALCAPACITORS( F)LOW-POWERSHUTDOWNTTL TRI-STATEMAX202E2204 ( )NoNoMAX203E220 NoneNoNoMAX205E550 NoneYesYesMAX206E4304 ( )YesYesMAX207E5304 ( )NoNoMAX208E4404 ( )NoNoMAX211E4504 ( )YesYesMAX213E4524 ( )YesYesMAX232E2204 (1)NoNoMAX241E4504 (1)YesAutoShutdown and UCSP are trademarks of Maxim IntegratedProducts, Information 16 Narrow SO0 C to +70 CMAX202 ECSE0 C to +70 CMAX202 ECPEPIN-PACKAGETEMP RANGEPART16 Plastic DIPO rdering Information continued at end of data Integrated | MAX213E,MAX232E/MAX241E 15kv ESD- protected , 5V RS-232 Transceivers Absolute Maximum to +6VV+.

4 (VCC- ) to +14VV- ..-14V to + VoltagesT_IN .. to (V+ + )R_IN .. 30 VOutput (V- - ) to (V+ + )R_OUT .. to (VCC+ )Short-Circuit Duration, Power Dissipation (TA= +70 C)16-Pin Plastic DIP (derate C above +70 C)..842mW16-Pin Narrow SO (derate C above +70 C) ..696mW16-Pin Wide SO (derate C above +70 C) ..762mW16-Pin TSSOP (derate C above +70 C) ..755mW20-Pin Plastic DIP (derate C above +70 C)..889mW20-Pin SO (derate C above +70 C)..800mW24-Pin Narrow Plastic DIP (derate C above +70 C) .. Wide Plastic DIP (derate C above +70 C) .. SO (derate C above +70 C)..941mW24-Pin SSOP (derate C above +70 C).

5 640mW28-Pin SO (derate C above +70 C)..1W28-Pin SSOP (derate C above +70 C) ..762mWOperating Temperature RangesMAX2_ _EC_ _ ..0 C to +70 CMAX2_ _EE_ C to +85 CStorage Temperature Range ..-65 C to +165 CLead Temperature (soldering, 10s) ..+300 CElectrical Characteristics(VCC= +5V 10% for MAX202E/206E/208E/211E/213E/232E/241E; VCC= +5V 5% for MAX203E/205E/207E; C1 C4 = F forMAX202E/206E/207E/208E/211E/213E; C1 C4 = 1 F for MAX232E/241E; TA= TMINto TMAX; unless otherwise noted. Typical valuesare at TA= +25 C.)Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device.

6 These are stress ratings only, and functionaloperation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure toabsolute maximum rating conditions for extended periods may affect device ; IOUT= VCC - HighVOHEN= VCC, EN = 0V, 0V ROUT VCC,MAX205E 208E/211E/213E/241E outputs disabled A 10 Output Leakage CurrentR_OUT; IOUT= (MAX202E/203E/232E) orIOUT= (MAX205E/208E/211E/213E/241E) LowVOLT_IN; EN, SHDN(MAX213E) or EN, SHDN (MAX205E 208E/211E/241E) Threshold LowVIL815T_IN = 0V (MAX205E 208E/211E/213E/241E) A15200 Input Pullup CurrentPARAMETERCONDITIONSSYMBOLUNITSMIN TYPMAXVCCS upply CurrentICCmA1120No load, TA= +25 C1420510 MAX211E/213 EMAX232E715 MAX241 EMAX205E 208 EEN, SHDN(MAX213E) or EN, SHDN(MAX205E 208E/211E/241E) Threshold HighVIHMAX205E/206E110110 MAX211E/241ET_IN = 0V to VCC(MAX202E/203E/232E)

7 A 10 Input Leakage CurrentMAX202E/203E1550 MAX213 EDC CHARACTERISTICSLOGICS hutdown Supply CurrentTA= +25 C, Figure 1 AMaxim Integrated | MAX213E,MAX232E/MAX241E 15kv ESD- protected , 5V RS-232 Transceivers Electrical Characteristics (continued)(VCC= +5V 10% for MAX202E/206E/208E/211E/213E/232E/241E; VCC= +5V 5% for MAX203E/205E/207E; C1 C4 = F forMAX202E/206E/207E/208E/211E/213E; C1 C4 = 1 F for MAX232E/241E; TA= TMINto TMAX; unless otherwise noted. Typical valuesare at TA= +25 C.)Note 1:MAX211EE_ _ and MAX213EE_ _ tested with VCC= +5V 5%.MAX205E/206E/211E/213E/241E normal opera-tion, Figure 2 MAX205E/206E/211E/213E/241E normal opera-tion, Figure 2CL= 150pFRL= 3k to 7k , CL= 50pF to 1000pF, one transmitter switchingAll drivers loaded with 3k to ground (Note 1)

8 TA= +25 C, VCC= 5 VVCC= 5V, no hysteresis in shutdownTA= +25 C, VCC= 5 VTA= +25 C, VCC= 5 VVCC= V+ = V- = 0V, VOUT= 2 VCONDITIONSns200 Receiver Output Disable Timens600 Receiver Output Enable Time s440tPLHR,tPHLRR eceiver Propagation Data RatemA 10 60 Output Short-Circuit Current 300 Output ResistanceV-3030 Input Voltage RangeV 5 9 Output Voltage Swingk 357 Input HysteresisVInput Threshold Threshold HighUNITSMINTYPMAXSYMBOLPARAMETERAll parts, normal operationAll parts, normal operationMAX213E (R4, R5), SHDN= 0V, EN = VCCRL= 3k , CL= 2500pF, all transmitters loaded s2tPLHT,tPHLTT ransmitter Propagation DelayTA= +25 C, VCC= 5V, RL= 3k to 7k , CL= 50pF to 1000pF, measured from -3V to+3V or +3V to -3V, Figure 3V/ s3630 Transition-Region Slew RateHuman Body Model 15 IEC1000-4-2, Air-Gap DischargekV 15 esd -Protection VoltageIEC1000-4-2, Contact Discharge 8 All parts, normal operationMAX213E (R4, R5), SHDN= 0V, EN = PERFORMANCE: TRANSMITTER OUTPUTS, RECEIVER INPUTSTIMING CHARACTERISTICSEIA/TIA-232E TRANSMITTER OUTPUTSEIA/TIA-232E RECEIVER INPUTSMAX213E, SHDN= 0V,EN = 1.

9 MAX211EE_ _ tested with VCC= +5V 5%.Maxim Integrated | MAX213E,MAX232E/MAX241E 15kv ESD- protected , 5V RS-232 Transceivers Typical Operating OUTPUT VOLTAGEvs. LOAD CAPACITANCEMAX202E-TOC1 LOAD CAPACITANCE (pF)VOH, -VOL (V) VCC = ALL TRANSMITTERS LOADEDDATA RATE = 120kbpsRL = 3k VCC = VCC = OUTPUT VOLTAGEvs. LOAD CAPACITANCEMAX202E-TOC2 LOAD CAPACITANCE (pF)VOH, -VOL (V) VCC = VCC = VCC = ALL TRANSMITTERS LOADEDDATA RATE = 120kbpsRL = 3k OUTPUT VOLTAGEvs. LOAD CAPACITANCEMAX202E-TOC3 LOAD CAPACITANCE (pF)VOH, -VOL (V) VCC = VCC = VCC = ALL TRANSMITTERS LOADEDDATA RATE = 120kbpsRL = 3k OUTPUT VOLTAGEvs.

10 LOAD CAPACITANCEMAX202E-TOC4 LOAD CAPACITANCE (pF)VOH, -VOL (V) VCC = VCC = VCC = ALL TRANSMITTERS LOADEDDATA RATE = 120kbpsRL = 3k 00 MAX211E/MAX213E/MAX241 ETRANSMITTER SLEW RATEvs. LOAD CAPACITANCEMAX202E-TOC5 LOAD CAPACITANCE (pF)SLEW RATE ( V/ s)5101520253010002000300040005000 +SLEW RATE -SLEW RATE ALL TRANSMITTERS LOADEDDATA RATE = 120kbpsRL = 3k Maxim Integrated | MAX213E,MAX232E/MAX241E 15kv ESD- protected , 5V RS-232 Transceivers Typical Operating Characteristics (continued)20 MAX202E/MAX203E/MAX232 ETRANSMITTER SLEW RATEvs. LOAD CAPACITANCEMAX202E-TOC6 LOAD CAPACITANCE (pF)SLEW RATE ( V/ s)46810121410002000300040005000 +SLEW RATE -SLEW RATE ALL TRANSMITTERS LOADEDDATA RATE = 120kbpsRL = 3k MAX208 ETRANSMITTER OUTPUT VOLTAGEvs.