Transcription of microPod II Configuration - DCCTools
1 microPod II Configuration 1. On a PC with the wiTECH Application installed, connect the microPod with a USB cable and enter the IP address into the address bar of an Internet browser. 2. Select Wireless Settings from the menu on the left. Version Page 1 of 9 Revision Date: 07-Jul-2015. 3. Select New, enter the name of the profile that you are creating, and select Add 4. In the Security Settings field, enter the wiadvisor Access Point wireless profile credentials: SSID. Security (select WPA PSK). Enter Key Confirm Key Version Page 2 of 9 Revision Date: 07-Jul-2015. 5. Select Save at the top of page 6. Select Close on the next page 7. Select Manage Networks from the menu on the left Version Page 3 of 9 Revision Date: 07-Jul-2015. 8. Select the radio button for the wireless interface 9. Next to the profile that you just created, select the Select & Start button.
2 Version Page 4 of 9 Revision Date: 07-Jul-2015. 10. Select Close on the next page 11. Once the connection is complete, you will see an IP address populate for the wireless interface In some cases, you may need to select the refresh button before getting an IP. address Version Page 5 of 9 Revision Date: 07-Jul-2015. 12. If you have tried selecting the refresh button and the tool is still not obtaining an IP. address: a. Select the radio button next to the wireless interface b. Select the Disable button in the Wireless Adapter area Version Page 6 of 9 Revision Date: 07-Jul-2015. c. Select OK on the warning pop up d. Select Close e. Select the radio button for the wireless interface Version Page 7 of 9 Revision Date: 07-Jul-2015. f. Select the Enable button in the Wireless Adapter area g. Select Close on the following page Version Page 8 of 9 Revision Date: 07-Jul-2015.
3 19. You should now see an IP address for the wireless interface 20. If you are still unable to acquire an IP address, make sure you are within range of the wiTECH wireless network, and/or try moving closer to the wiTECH Access Gateway NOTE: Please contact 1-855- wiadvisor or if you have any issues configuring your microPod . Version Page 9 of 9 Revision Date: 07-Jul-2015.
