Military Police The Army Physical Security Program

1 FOR OFFICIAL USE ONLYArmy Regulation 190 13 Military Police The Army Physical Security Program Distribution Restriction Statement. This regulation contains operational information for official Government use only; thus distribution is limited to Government agencies. Requests from outside the Government for release of this regulation under the Freedom of Infor-mation Act or Foreign Military Sales Program must be made to the Office of the Provost Marshal general (DAPM-MPO-PS), (2800 Army Pentagon, Washington, DC 20310-2800). Headquarters Department of the Army Washington, DC 27 June 2019 FOR OFFICIAL USE ONLYFOR OFFICIAL USE ONLYSUMMARY of CHANGE AR 190 13 The Army Physical Security Program This major revision, dated 27 June 2019 oUpdates responsibilities (chap 1).oImplements the Military Police Security Management System (Counter Measures) and mandates use to documentphysical Security inspections (para 1 10h).

2 OExtends the time period from 60 to 90 days for deficiencies that are correctable before a waiver to policy must besubmitted (para 2 3b(1)(a)).oAdds a requirement that Army commands, Army service component commands, direct reporting units, and the ArmyNational Guard have a Physical Security plan, and provides a format (para 2 8a and app B).oRevises the list of facilities that can be designated as mission essential vulnerable areas (para 2 11d).oChanges the inspection period from 24 to 18 months for conventional arms, ammunition, and explosives bulk storage,nuclear reactors, special nuclear materials, chemical agents, and biological select agents and toxins (paras 2 15c(1)through (3)).oEstablishes a personnel reliability screening and evaluation Program (para 2 21).oMoves policy on Physical Security protection requirements for high-risk personnel from AR 190 51 to this regulation(para 2 22).oProvides instruction and guidance for the Department of Defense Security Professional Education Developmentcertification Program (para 3 8).

3 ORemoves the warning sign for site perimeters, and extends the use of the warning sign at figure 6 1 to include use atsite perimeters (para 6 7).oRevises policies on the survivor access card and incorporates AD 2014 05, which provides fitness adjudicationstandards and procedures for installation access control (paras 8 4 and 8 5).oProvides guidance on how to manage and use small, unmanned aircraft systems on, or near, installations (chap 11).oRevises the format for Physical Security plans for installations, stand-alone facilities, and units (app C).oProvides a format for the barracks Physical Security plan (app D).oProvides instructions to complete a DA Form 7708 (app E).oProvides manning factors for installation access control points (app F).oProvides requirements to maintain and test systems and equipment at installation access control points (app G).oProvides procedures for the monthly operational test of an intrusion detection system (app H).

4 FOR OFFICIAL USE ONLY* This regulation supersedes AR 190 13, dated 25 February 190 13 27 June 2019 FOR OFFICIAL USE ONLYi Headquarters Department of the Army Washington, DC *Army Regulation 190 1327 June 2019 Effective 27 July 2019 Military Police The Army Physical Security Program History. This publication is a major This regulation implements Department of Defense Instruction , Department of Defense Instruc-tion , and Army Directive 2014-05. It prescribes policies and procedures to plan and implement the Department of the Army Physical Security Program . It provides pol-icies on how to use Physical Security equip-ment; appoint Physical Security officers and inspectors; conduct Physical Security in-spections and surveys; manage Physical se-curity credentials; manage and use identifi-cation cards and badges; manage restricted areas; conduct access control for installa-tions and stand-alone facilities; and manage Security This regulation applies to the Regular Army, the Army National Guard/Army National Guard of the United States, and the Army Reserve, unless otherwise stated.

5 It also applies to Govern-ment-owned and Government-operated and exception proponent of this regulation is the Provost Marshal general . The proponent has the authority to approve exceptions or waivers to this regulation that are consistent with controlling law and regulations. The proponent may delegate this approval au-thority, in writing, to a division chief within the proponent agency or its direct reporting unit or field operating agency, in the grade of colonel or the civilian equivalent. This approval authority is delegated to the Chief, Office of the Provost Marshal general , Op-erations Division. Activities may request a waiver to this regulation by providing justi-fication that includes a full analysis of the expected benefits and must include formal review by the activity s senior legal officer. All waiver requests will be endorsed by the commander, director, or senior leader of the requesting activity and forwarded through their higher headquarters to the policy pro-ponent.

6 Refer to paragraph 2 3 of this reg-ulation for specific internal control process. This regulation contains internal controls and identifies key internal controls that must be evaluated (app J).Supplementation. Supplementation of this regulation and establishment of com-mand and local forms are prohibited with-out prior approval from the Provost Mar-shal general (DAPM MPO PS), 2800 Army Pentagon, Washington, DC 20310 improvements. Users are invited to send comments and suggested improvements on DA Form 2028 (Recom-mended Changes to Publications and Blank Forms) directly to Provost Marshal general (DAPM MPO PS), 2800 Army Pentagon, Washington, DC 20310 2800 or This regulation is available in electronic media only and is intended for command levels C, D, and E for the Regular Army, the Army National Guard/Army Na-tional Guard of the United States, and the Army (Listed by paragraph and page number) Chapter 1 Introduction, page 2 Section I general , page 1 Purpose 1 1, page 1 Reference and forms 1 2, page 1 Explanation of abbreviations and terms 1 3, page 1 Responsibilities 1 4, page 1 Records management (recordkeeping)

7 Requirements 1 5, page 1 FOR OFFICIAL USE ONLY ii AR 190 13 27 June 2019 FOR OFFICIAL USE ONLY Section II Responsibilities, page 2 Assistant Secretary of the Army (Acquisition, Logistics and Technology) 1 6, page 1 Assistant Secretary of the Army (Civil Works) 1 7, page 1 Assistant Secretary of the Army (Installations, Energy and Environment) 1 8, page 1 Assistant Secretary of the Army (Manpower and Reserve Affairs) 1 9, page 1 Provost Marshal general 1 10, page 2 Deputy Chief of Staff, G 1 1 11, page 2 Deputy Chief of Staff, G 2 1 12, page 2 Deputy Chief of Staff, G 3/5/7 1 13, page 3 Deputy Chief of Staff, G 4 1 14, page 3 Chief Information Officer/G 6 1 15, page 3 Assistant Chief of Staff for Installation 1 16, page 3 The Inspector general 1 17, page 3 The Surgeon general 1 18, page 3 Chief of Engineers 1 19, page 3 Commanding general , Army Corps of Engineers 1 20, page 3 Chief, Army Reserve 1 21, page 4 Commanding general , Army Training and Doctrine Command 1 22, page 4 Directors and supervisors of Army staff agencies and commanders or directors of Army organizations not on Military garrisons 1 23, page 5 Senior commanders, directors, and managers appointed per AR 600 20 1 24, page 5 Commanders and directors of Army commands, Army service component commands.

8 Direct reporting units, the Army National Guard, and Army Corps of Engineers 1 25, page 6 Product manager, force protection systems 1 26, page 6 Commanders and directors with mission command responsibility for Army-managed Armed Forces Reserve Centers, Army Reserve Centers, Army National Guard Armories, and similar Army stand-alone facilities subject to DA juris-diction or administration, or in DA custody 1 27, page 7 Commanders and directors of installation garrisons and Army-led Joint bases, and commanders of tenant units on Army installations and Army-led Joint bases 1 28, page 8 Installation and activity provost marshals, directors of emergency services, or Physical Security officers 1 29, page 9 Installation, garrison and activity engineers and master planners 1 30, page 9 Career Program 19 ( Physical Security and Law Enforcement) functional chief representative and career Program man-ager 1 31, page 9 Chapter 2 Department of the Army Physical Security Program , page 2 general 2 1, page 10 Privacy and freedom of information 2 2, page 11 Security criteria deviation process 2 3, page 11 Crime prevention 2 4, page 12 Program assessment 2 5, page 13 Planning factors 2 6, page 13 Planning coordination 2 7, page 13 Physical Security plans 2 8, page 14 Contingency plans 2 9, page 14 Barracks plans 2 10, page 15 Mission essential vulnerable areas 2 11, page 15 Threat assessment 2 12, page 16 Army Security Management System (CounterMeasures)

9 2 13, page 16 Physical Security surveys 2 14, page 16 Physical Security inspections 2 15, page 17 Report of action taken or planned for Physical Security surveys and inspections 2 16, page 19 Report classification 2 17, page 19 Security engineering surveys 2 18, page 19 FOR OFFICIAL USE ONLY AR 190 13 27 June 2019 iii FOR OFFICIAL USE ONLY Inspection and maintenance of containers, vaults, and locks approved by the general Services Administration 2 19, page 20 Supporting and supported Department of Defense components for Physical Security 2 20, page 20 Personnel reliability Program 2 21, page 21 High risk personnel 2 22, page 22 Chapter 3 Physical Security Personnel, Credentials, and Professional Certifications, page 22 Physical Security officer 3 1, page 22 Physical Security inspector 3 2, page 23 Management of additional skill identifier H3, Physical Security inspector credentials, and Physical Security special-ists 3 3, page 23 Additional training 3 4, page 23 DA Form 4261 and 4261 1 ( Physical Security Inspector Identification Card)

10 3 5, page 24 Uniforms 3 6, page 25 Vehicles 3 7, page 25 Professional certifications 3 8, page 25 Chapter 4 Physical Security Resources, page 29 general 4 1, page 29 Management Decision Package Physical Security matters 4 2, page 29 Requirements and resources 4 3, page 29 Physical Security for Military construction 4 4, page 30 Physical Security for Corps of Engineers civil works and like projects construction 4 5, page 30 Chapter 5 Security Identification Cards and Badges, page 31 Purpose 5 1, page 31 general 5 2, page 31 Minimum Security identification card and badge requirements 5 3, page 31 Computerized card and badge systems 5 4, page 31 Chapter 6 Restricted Areas, page 31 general 6 1, page 31 Command authority 6 2, page 32 Designation of restricted areas 6 3, page 32 Prohibited actions 6 4, page 32 Prohibition on commercial image collection and surveillance 6 5, page 32 Perimeter controls for installations and SAFs 6 6, page 32 Posting of restricted areas 6 7, page 33 National Defense Areas 6 8, page 34 Procedures for restricted area violations 6 9, page 35 Chapter 7 Physical Security Councils, Working Groups and Boards, page 35 Purpose 7 1, page 35 Army Physical Security Enterprise and Analysis Group 7 2, page 36 Chapter 8 Army Installation and Facility Access Control, page 37 general 8 1, page 37 Visitor control Program 8 2, page 38 Automated installation entry visitor pre-screen for access control point Security 8 3, page 40 Personnel authorized unescorted access 8 4, page 41 FOR OFFICIAL USE ONLY iv AR 190 13 27 June 2019 FOR OFFICIAL USE ONLY Fitness adjudication standards and procedures for installation access control 8 5.