Minimum Qualification Requirement

1 civil aviation Authority of the Fiji Islands Personnel Policies andAdministration Manual Minimum Qualification requirements section 26 Issue Date.: 20 Jan 06 Revised Date: section Page 1 of 7 26. Minimum Qualification requirements This section states the general Minimum Qualification requirements for the inspectors. More detailed information on their principal accountabilities are included in the individual inspector s Job Description which is placed in file CA 1/1/1/3. Senior Flight Operations Inspector Job Description To assess the probable level of operational safety that an operator (prospective operator or AOC holder) is currently achieving and to report standards observed to Controller of Air Safety.

2 Qualification & Experience A current Air Transport Pilot Licence with an unrestricted instrument rating, 7500 hours Pilot-in-Command; a flight instructor s rating or considerable experience as a check pilot on a multi-engine turbine aircraft transport preferably with an airline; at least 3 years experience as an FOI; a sound knowledge of aviation legislation and ICAO operations documentation; the ability to work in a team, communicate effectively both verbally and in writing and computer literate. Flight Operations Inspector Job Description Primary purpose of the position is to assist the Controller Air Safety (CAS) in ensuring that the standards of aviation safety are applied by the industry.

3 Qualification & Experience i) Extensive operational experience in air transport operations. ii) Extensive experience in airline check and training. iii) Not less than 5,000 hours as pilot-in-command of air transport aircraft. iv) Hold a current air transport pilot licence. v) A reputation for processing qualities of initiative, tact, tolerance, patience and integrity. These requirements may be varied as required by the Authority to suit the particular category of Flight Operations Inspector. Minimum Qualification requirements section 26 Issue Date.: 20 Jan 06 Revised Date: section Page 2 of 7 Dangerous Goods & Cabin Safety Inspector (DGCSI) Job Description The position of DG&CS Inspector reports to a Flight Operations Inspector (FOI) and assist other staff of the Air Safety Department in carrying out safety oversight monitoring of national and international operating standards of holders of Air Operators Certificates of Competence and other aircraft operators in accordance with the Air Navigation Regulations and the ICAO Standards and Recommended Practices (SARPS)

4 Covering Mandatory Occurrence Reporting, Dangerous Goods, Cabin Services, aircraft emergency procedures and enforcement matters. Qualification & Experience i) A recognised Diploma in aviation discipline from a recognised university or acceptable Qualification and training in investigation/prosecution works with at least a private pilot licence. ii) Incumbent must be a trained Safety Auditor for cabin services of large aircraft, and aircraft emergency procedures. Good communication skill s and ability to work in a team. Airworthiness Officer Job Description The incumbent reports to the Senior Airworthiness Officer but works closely with the Airworthiness Advisor and assist with the safety and technical regulations of all aircrafts in Fiji.

5 Such safety regulation is based on ANR, ICAO Annexes, other international standards, Standards Documents (SD) and Local Procedures. Qualification & Experience Must be a Licenced Aircraft Maintenance Engineer (LAME) with at least five years of certification experience on both line and base maintenance in JAR 145 or equivalent environment. Experience in Quality Assurance and management will be an advantage. The candidate must have sound communication skills with ability to work as part of a team. Air Traffic Management Inspector (ATMI) Job Description In its regulatory role, the ATMI designs, develop, promulgate and review ATS safety standards.

6 It oversights the provision of air traffic services performed by Airport Fiji Limited and any other organisations within its ambit in accordance with the applicable Rules/Regulations by regular audits/inspections, desktop audits of documentation Minimum Qualification requirements section 26 Issue Date.: 20 Jan 06 Revised Date: section Page 3 of 7 prior to field audit, quality assurance; and ensures compliance through enforcement where required. Incumbent audits and regularly inspects the adequacy of ATS in terms of operational procedures, practices, manpower numbers, equipment/facilities, and personnel training/development/licensing.

7 Incumbent oversights the examination conducted by the Air Traffic Service Licensing/Rating Board, scrutinises the applications for ATS Licences submitted and conduct the annual ATS re-validation examination. Incumbent audits and monitors safe implementation of new systems and associated procedures such as CNS/ATM, RVSM, ACAS/TCAS, etc. Incumbent monitors/investigates/analyses ATS incidents/regulatory breaches and liaise/advise on aviation safety education matters. ATMI contributes to the overall aviation safety awareness and education program. Incumbent assists in air safety accident investigation conducted by authorised personnel.

8 Qualification & Experience Hold or have held an ATC licence/certificate with aerodrome, approach and area control (non-radar) ratings and 8 years post Qualification experience of which at least 3 years in supervisory/managerial level; successful completion of audit & lead auditor course. Good knowledge Fiji Laws relating to aviation and experience in ATS procedures/practices, personnel licensing/training, and the ICAO CNS/ATM systems. Analytical ability, flexibility of approach and some auditing experience. Integrity; self-motivated; ability to command respect/cope under pressure; must be able to pay attention to details, deadlines and be computer literate.

9 Electrical/Mechanical Inspector Job Description In its regulatory role, the EMI oversights through regular audits/inspections the provision of Electrical/Mechanical services performed by Airport Fiji Limited and any other organisations within its ambit, through auditing and quality assurance including enforcement action where required, in accordance with the applicable Rules/Regulations. Audits the adequacy of the technical equipment/facilities, procedures, practices, manpower numbers, personnel training/development/licensing in the provision of visual navigation services; scrutinise aeronautical facility technician s licence (electrical/mechanical) applications ensuring that the applicant meets the requirements for issue/renewal of the licence and associated ratings.

10 Minimum Qualification requirements section 26 Issue Date.: 20 Jan 06 Revised Date: section Page 4 of 7 Contributes to the overall aviation safety awareness and education program. Assists the authorised person in air safety accident investigation, as applicable. Qualification & Experience Degree/Diploma in the Electrical or Mechanical discipline with at least 8 years of relevant experience; familiar with licensing process for issue/renewal of technical facility licence and associated ratings; knowledge/experience on inspection and auditing is essential; successful completion of audit & lead auditor course. Integrity; self-motivated; ability to command respect/cope under pressure; must be able to pay attention to details and to deadlines; good verbal/written communications skills and be computer literate.