ML-1100 SERIES MORTISE LOCK & PULL - …

1 ML-1100 SERIES MORTISE LOCK & PULLC lean Architectural Appearance1000 Pounds ofHolding ForceTamper-proofMountingTotally ConcealedLock & ArmaturePDS1100DP/2-13 Versatile and FunctionalThe ML-1100 mortised electromagnetic locksare ideal for many different MORTISE locks can be utilized with theDortronics DPA door pulls for an attractivearchitectural appearance, while providingunsurpassed security functionality. Using the DPA SERIES pull with a ML seriesmortise lock allows the force of the magnet tobe directly opposite the direction of pull ; there-fore no mechanical advantage is gained whenforce is applied to the pull handle. There is nochance of racking the door. Steel or aluminumframed doors are susceptible to permanentdamage when the lock is header mounted andthe door handle is pulled repeatedly (while thedoor is locked).

2 Rugged ConstructionThese locks and door pulls were first utilizedin New York City s Public Housing high level of use combined with the needto conform Architecturally and Functionallyled to a truly tough yet appealing design. Allfasteners are Stainless Steel and design allows the ML SERIES lock fastenersto be totally concealed when the door is closedand areas where aesthetics are a concern, theDPA SERIES pull handle with the ML-1100series lock allows concealment of the lockinghardware. This pull handle is an attractiveoption for lobby and vestibule entrances. Thesepulls may be custom engraved and supplied inplated or anodized OperationAll Dortronics electromagnetic locking devicesare fail-safe, releasing instantly upon commandor loss of power.

3 With no moving parts towear, stick or bind, and no mechanical linkagesto bend or break, locking and unlocking isaccomplished with ease and ControlML SERIES locks can be controlled individuallyor simultaneously from one or many status of the lock may be monitored byany card access system via the optional MBS(magnetic bond sensor) which signals that thelock is properly energized and is holding. Thewell confined magnetic field allows these locksto be used in computer rooms and other elec-tronically sensitive shown openDoor shown closedSpecifications: MORTISE lock ModelsML-1100 - Single Door (1000 lbs. total)Physical SizeML-1100- 10-7/8 Long x 1-1/2 Wide x 1-3/8 deep overall ElectricalOperating voltage ML-1100 - 360ma @ 24 VDC 12 VDC Non-stock itemcheck with factory.

4 Door pull Physical sizeDPA1100- 12 Long x 6-1/4 Wide x 1-3/8 Thick Options: xB - Dual magnetic bond sensors detect improper armature mating or lack of sufficient lock power to provide rated holding force. Finish: ML SERIES MORTISE locks have a Stainless Steel mounting bracket, & Zinc Plated magnetic core and armature for Corrosion Door pull Finishes: x DBA - Dark Bronze Anodize xSBA - Satin Black Anodized xUS3 - Polished Brass xUS4 - Satin BrassxUS26 - Polished Chrome xUS26D - Satin Chrome Custom Engraving Available:Check with : The ML SERIES mortised electromagneticlocks are mounted by cutting a hole intothe door frame per the template provided. All wiring connections are made to theflying leads from the magnet.

5 Two lockmounting blocks are then attached to theframe utilizing one of the three tappedholes. The ML SERIES magnet is thenattached to the mounting blocks via theremaining tapped Door pull Mounting: Utilizing the template provided, drill thruthe door edge in 4 places. Mount the pullhandle with the tamper-proof specially designed shoulder screw isprovided to insure proper floating actionof the door mounted armature which isfactory SAGHARBORTURNPIKE, SAGHARBOR, NY - (800) 906-0137 - (631) 725-8148 FAX1100 SERIES MORTISE LOCK & DOOR pull