Example: bankruptcy
MS 200, MS 200 T
Fuel: as specified in instruction manual 3.3 Ignition System Air gap between ignition module and fanwheel: 0.25 mm Spark plug (suppressed): Bosch WSR6F Electrode gap: 0.5 mm 3.4 Chain Lubrication Speed-controlled oil pump with reciprocating piston and manual flow control Oil pump with adjustable delivery rate: 3.5 - 9.5 cm3/min at 10,000 rpm
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
STIHL 034, 036, 036 QS - STIHL B.Net
www.stihlbnet.cade la pompe à huile 57 11.5 Remise en état de la pompe à huile 58 12 Dispositif d’alimentation 59 12.1 Filtre à air 59 12.2 Contrôle d’étanchéité du carburateur 60 12.3 Démontage et montage du carburateur 61 12.4 Réparation du carburateur 62 12.5 Réglage du carburateur 66 12.6 Aération du réservoir de carburant 67
STIHL BG 56 - SH 86
www.stihlbnet.caScrew P 5x18 Blower housing, outer/inner 3.0 Screw D 5x24 Blower housing, inner/crankcase 9.0 Screw D 5x24 Blower housing, inner/engine pan 8.0 Screw D 5x24 Blower housing, inner/cylinder 8.0 Nut M 8x1 L Blower wheel/crankshaft 21.0 Screw P 5x18 Handle/cover/plug 3.0 Screw P 5x18 Handle/handle frame/plug 3.0
Related documents
IO-320 Series - Lycoming
www.lycoming.comwedge or full wedge rings. Consult the latest revision of Service Instruction No. 1037 for proper piston and ring combinations. Accessory Housing – The accessory housing is made from an aluminum casting and is fastened to the rear of the crankcase and the top rear of the sump. It forms a housing for the oil pump and the various accessory drives.