Example: bankruptcy

MULTI-POINT VEHICLE INSPECTION

MULTI-POINTVEHICLE INSPECTIONName:_____Year/Model:_____Date :_____Repair Order #:_____VIN (last 8 digits):_____Odometer:_____MI:_____MII:_ ____Checked and OKMay Require Attention SoonRequires Immediate AttentionCHECK FLUID LEVELSOKFILLEDREQUIRES ATTENTIONE ngine oilBrake fluid reservoirTransmission (if equipped w/dipstick)Coolant recovery reservoirPower steeringWindshield washerCHECK BATTERYB attery conditionBattery cables and connectionsWIPER BLADESLFRFRear(if applicable)Windshield condition Cracks_____ Chips_____CHECK BRAKES / MEASURE FRONT AND REAR LININGS7 mm (9/32) or greaterLF6 mm (8/32) to 4 mm (5/32)RF3 mm (4/32) or less7 mm (9/32) to 5 mm (7/32)LR4 mm (5/32)RR3 mm (4/32) or lessLowest Front Lining _____Lowest Rear Lining _____Brake system (also including lines, hoses and parking brake)CHECK TIRES AND TREAD DEPTH8/32 or Greater8/32 or GreaterLF7/32 to 4/327/32 to 4/32RF3/32 or Less3/32 or LessFront PSI set to:_____Front PSI set to.

– Inspect left front tire (show customer how you measure tread depth). – Open hood and check fluid levels (at minimum, point out which will be checked). – Note front headlamp operation and lens condition. – Inspect right front tire tread depth. – Inspect right windshield wiper blade. – Inspect right rear tire tread depth.

Tags:

  Trade, Depth, Tread depth

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of MULTI-POINT VEHICLE INSPECTION

1 MULTI-POINTVEHICLE INSPECTIONName:_____Year/Model:_____Date :_____Repair Order #:_____VIN (last 8 digits):_____Odometer:_____MI:_____MII:_ ____Checked and OKMay Require Attention SoonRequires Immediate AttentionCHECK FLUID LEVELSOKFILLEDREQUIRES ATTENTIONE ngine oilBrake fluid reservoirTransmission (if equipped w/dipstick)Coolant recovery reservoirPower steeringWindshield washerCHECK BATTERYB attery conditionBattery cables and connectionsWIPER BLADESLFRFRear(if applicable)Windshield condition Cracks_____ Chips_____CHECK BRAKES / MEASURE FRONT AND REAR LININGS7 mm (9/32) or greaterLF6 mm (8/32) to 4 mm (5/32)RF3 mm (4/32) or less7 mm (9/32) to 5 mm (7/32)LR4 mm (5/32)RR3 mm (4/32) or lessLowest Front Lining _____Lowest Rear Lining _____Brake system (also including lines, hoses and parking brake)CHECK TIRES AND TREAD DEPTH8/32 or Greater8/32 or GreaterLF7/32 to 4/327/32 to 4/32RF3/32 or Less3/32 or LessFront PSI set to:_____Front PSI set to.

2 _____8/32 or Greater8/32 or GreaterLR7/32 to 4/327/32 to 4/32RR3/32 or Less3/32 or LessRear PSI set to:_____(Check lamps)Rear PSI set to:_____Rotation neededAlignment neededWheel balance neededLF LRWear Pattern/DamageRF RRADDITIONAL CHECKSI nspect for visible leaks:Fuel system (also including gas cap seating)Engine, transmission, drive axle, transfer caseEngine cooling systemShocks and struts also check operationInspect visual condition:Belts: engine, accessory, serpentine, and/or V-driveHoses: engine, power steering and HVACE ngine air filter and cabin air filtersSteering components and steering linkageCV drive axle boots or driveshafts and U-jointsExhaust system componentsCOMMENTS_____Consultant:_____T echnician:_____MAINTENANCE VISIT RECOMMENDATIONDate:_____Time:_____Reason for Maintenance:_____SIMPLIFIED MAINTENANCEMIR equiredPerformedMIIR equiredPerformedINTERIORS ubscription activatedRemaining engine oil life:_____% Not applicable:_____90911 INSPECTION Form COBER3 7/18/05 4:31 PM Page 1 Service PerformedChecked and OKMay Require Attention SoonRequires Immediate Attention90911 SIMPLIFIED MAINTENANCE MIMAINTENANCE MENUIn addition to inspections noted on the front side of this form, also complete the following for MI:Change engine oil and filter.

3 Reset oil life and inspect tires. Check inflation pressures and : lubricate front suspension, ball joints, steering linkage, and parking brake with Allison Transmission only: inspect external control main filter, replace if any additional services. See Additional Required Services in Owner s Manual.$_____MIIMAINTENANCE MENUIn addition to listed MImenu, also complete the following for MII:Clean outside of radiator and condenser; pressure-check cooling system and radiator and heater hoses for cracks, swelling, or suspension, steering linkage, and transaxle shift safety belts, buckles, latch plates, retractors, anchorages, and safety belt reminder light for damage or loose key lock cylinders, body door hinges, hood, door, and trunk throttle linkage and ignition steering system and suspension for damage, loose, or missing power steering lines and hoses for leaks or brake-transaxle shift interlock for correct : check transmission fluid level; add fluid if without a filter restriction indicator: replace engine air cleaning any additional services.

4 See Additional Required Services in Owner s Manual.$_____ADDITIONAL REQUIRED SERVICES (see service manual for mileage intervals)Inspect fuel system for damage or engine air cleaner emission-control service (if equipped).An emission-control automatic transaxle fluid and filter (severe service).Change automatic transaxle fluid and filter (normal service).Replace spark plugs, inspect spark plug emission-control cooling system service (every 150,000 miles or every 5 years, whichever occurs first).An emission-control accessory drive emission-control :_____Technician:_____90911 INSPECTION Form COBER3 7/18/05 4:31 PM Page 2 Name:_____Year/Model:_____Date:_____Repa ir Order #:_____VIN (last 8 digits):_____Odometer:_____MI:_____MII:_ ____Checked and OKMay Require Attention SoonRequires Immediate AttentionCHECK FLUID LEVELSOKFILLEDREQUIRES ATTENTIONE ngine oilBrake fluid reservoirTransmission (if equipped w/dipstick)Coolant recovery reservoirPower steeringWindshield washerCHECK BATTERYB attery conditionBattery cables and connectionsWIPER BLADESLFRFRear(if applicable)Windshield condition Cracks_____ Chips_____CHECK BRAKES / MEASURE FRONT AND REAR LININGS7 mm (9/32) or greaterLF6 mm (8/32) to 4 mm (5/32)RF3 mm (4/32) or less7 mm (9/32) to 5 mm (7/32)LR4 mm (5/32)RR3 mm (4/32) or lessLowest Front Lining _____Lowest Rear Lining _____Brake system (also including lines, hoses and parking brake)CHECK TIRES AND TREAD DEPTH8/32 or Greater8/32 or GreaterLF7/32 to 4/327/32 to 4/32RF3/32 or Less3/32 or LessFront PSI set to:_____Front PSI set to.

5 _____8/32 or Greater8/32 or GreaterLR7/32 to 4/327/32 to 4/32RR3/32 or Less3/32 or LessRear PSI set to:_____(Check lamps)Rear PSI set to:_____Rotation neededAlignment neededWheel balance neededLF LRWear Pattern/DamageRF RRADDITIONAL CHECKSI nspect for visible leaks:Fuel system (also including gas cap seating)Engine, transmission, drive axle, transfer caseEngine cooling systemShocks and struts also check operationInspect visual condition:Belts: engine, accessory, serpentine, and/or V-driveHoses: engine, power steering and HVACE ngine air filter and cabin air filtersSteering components and steering linkageCV drive axle boots or driveshafts and U-jointsExhaust system componentsCOMMENTS_____Consultant:_____T echnician:_____MAINTENANCE VISIT RECOMMENDATIONDate:_____Time:_____Reason for Maintenance:_____SIMPLIFIED MAINTENANCEMIR equiredPerformedMIIR equiredPerformedINTERIORS ubscription activatedRemaining engine oil life:_____% Not applicable:_____BRAKE LINING**LABORB rake Gauge to backingBrake Gauge to backingTire Gauge/to rivets or backingMEASUREMENTOP CODE plate FRONT PADS plate REAR PADS plate REAR SHOES7mm or greaterBK7 GreenGreenGreen6mmBK6 YellowGreenGreen5mmBK5 YellowGreenGreen4mmBK4 YellowYellowYellow3mmBK3 RedRedYellow2mmBK2 RedRedRed1mm or lessBK1 RedRedRed** Since front pads wear faster, only enter rears as lowest readings if they measure yellow or TREAD depth *LABOR OP CODEGREEN/YELLOW/RED8/32" or greaterTIRE8 Green7/32"TIRE7 Yellow6/32"TIRE6 Yellow5/32"TIRE5 Yellow4/32"TIRE4 Yellow3/32" or lessTIRE3 Red* If tires are replaced this visit, measure and record the new parts INSPECTION Form COBER3 7/18/05 4.

6 31 PM Page 3 HOW TO CONDUCT A VEHICLE INSPECTION While in VEHICLE : If MIor MII, record remaining engine oil life. Check operation/condition of horn, interior lights, turn signals, hazard lights turn on exterior lamps. Check operation of windshield wipers and windshield washer spray. For OnStar status, check GMVIS. To request activation, have customer press OnStar Blue Button. OnStar Hands-FreeCalling Store dealership phone number and demonstrate Call function. Inspect windshield for cracks, chips or pitting. Crank steering wheel to the left to expose front left tire tread. Pop the hood. Exiting the VEHICLE : Inspect left windshield wiper blade. Inspect left front tire (show customer how you measure tread depth ). Open hood and check fluid levels (at minimum, point out which will be checked). Note front headlamp operation and lens condition. Inspect right front tire tread depth .

7 Inspect right windshield wiper blade. Inspect right rear tire tread depth . Note tail lamp operation and lens condition. Inspect rear windshield wiper blade, if equipped. Inspect left rear tire tread depth . Check gas cap seating. Note overall condition of body, painted surfaces, and exterior side mirrors (record in comments section). Turn off exterior lamps. Record all VEHICLE observations on INSPECTION Form and discuss findings with INSPECTION Form COBER3 7/18/05 4:31 PM Page 4


Related search queries