NAE Commissioning Guide - Johnson Controls

1 MS-NAE55xx-3, MS-NAE5510-2U, MS-NAE5510-3U, MS-NXE85SW-xBuilding Technologies & Solutions 2022-06-03 NAE Commissioning GuideLIT-1201519 Release Commissioning of Commissioning Automation Engines (NAEs)..10 NCE25 models - Release models - Release models - Release models - Release model - Release communications network UI on Management Portal user Help recommendations for downloading Configuration Tool (SCT)..22 Controller Configuration Tool (CCT)..23 Archive disk image updates and archive database Access operating mode (small-capacity engines only)..26 Login user names and zone, date, and time and 31 Simple Network Management Protocol (SNMP) default NCE/NAE 35 Allow Security and non-FIPS and user command network 42 NAE Commissioning Guide3 Detailed Launcher to access the direct connection to an NAE for a network that supports DHCP and 45 Preparing NAE for a network without DHCP and without DNS support when theNAE uses NAE for a network without DHCP and without DNS support when theNAE uses a static IP NAE for a network that supports DHCP but not NAE for a network that supports DNS but not Site Management Portal UI on an basic NAE parameters in the focus NAE network email alarm and event notifications and destinations in SMP UI atRelease and 55 Configuring encrypted 61 Configuring encrypted email with no authentication 61 Configuring encrypted email with SMTP encrypted email with POP-before-SMTP NAE SNMP alarm notifications and Syslog 66 Setting the time, date, time zone.

2 And time 68 Setting up NAE alarm existing alarm new an NAE as a child of a Site 70 Changing Site Director with the user accounts from a demoted Site security database and clearing it from demoted Site Director prior toRelease 73 Moving security database and clearing it from demoted Site Director Release or and disabling Warning NAE network an Expert NAE 82 Corrupted NAE connection related reset related diagnostic Commissioning Guide4 NAE LED status LED startup 93 NAE35/NAE45 LED startup 94 NAE55 LED startup 94 Diagnostic 96 Troubleshooting Ethernet network communications (Ping).. 97 Pre-boot execution environment (PXE)..97 Determining the NAE IP address and device name for a network the NAE IP address by using the SCT the NAE IP address and device name by using a serial port a computer to be compatible with specifications - NCE, NAE, and NIE : Time zone, date, and time 109 Time synchronization 110 Windows time time time 111 Example time time time and date indication on status a time synchronization Site Director for Windows time Site Director for Multicast time Site Director for BACnet time synchronization (Network Engines only).

3 116 Configuring Site Director time to sync with external time 117 Selecting a site time server for the Metasys Server Site Director (Windows).. 118 Selecting a site time server for the Metasys Server Site Director (Multicast)..118 Selecting a site time server for the Network Engine Site Director (Windows)..119 Selecting a site time server for the Network Engine Site Director (Multicast)..120 Setting the time the time zone on the Metasys Server Site the time zone in the Network Engine Site the date and time on the Site the date and time in the Metasys Server Site 124 Setting the date and time in the Site Director Network time synchronization the Site Director defined for an engine or : Configuring and Maintaining and maintaining preferences 1305 NAE Commissioning GuidePreferences 130 System and user default system 133 Copying preferences between default user user preference 134 Copying user preferences to another preferences for a network engine : Certificate management 136 Certificate Signing Request (CSR).

4 138 Import list tree 142 Detailed a a a a a 148 Deleting a a certificate 151 Replacing a self-signed 151 Backing up a : Erasing Network Engine SDRAM and flash Network Engine SDRAM and flash Commissioning Guide6 IntroductionImportant: The MS-NAE55xx-3 is the only NAE hardware engine you can upgrade to The MS-NAE55xx-2 engines must remain at Release or earlier, and the other, smallcapacity network engines, such as the NAE35s, NAE45s, and NCE25s, must remain at or document describes how to: commission a Network Control Engine (NCE) or a Network Automation Engine (NAE) fornetwork connectivity in several network scenarios access the Metasys system Site Management Portal UI on an NAE configure the basic NAE parameters for initial operation on the network enable or disable Advanced Security and Hypertext Transfer Protocol Secure (https) troubleshoot an NAE configure the NAE DDAs for sending alarm and event messages through email and SNMP configure a Syslog DDA for sending events and audits to an external Syslog serverThis document does not describe how to mount, wire, or power on an NAE.

5 For more information,refer to NAE55 Installation Guide (Part No. 24-10051-43). Also, this document does not describe howto build or download an archive database for a Metasys system site or how to configure an NAE tomonitor and control a building automation system (BAS). For those procedures, refer to SCT: SystemConfiguration Tool Help (LIT-12011964).Note: In this document, NAE refers to all NCE25, NAE35, NAE45, NAE45-Lite, NAE55, and NAE85models, unless noted otherwise. Also, the term small-capacity engine refers to any NCE25,NAE35, NAE45, or NAE45-Lite model, and the term large-capacity engine refers to any NAE55or NAE85 addition to this document, refer to the following literature for information specific to your modelof NAE: NCE25 Series: refer to the NCE Technical Bulletin (LIT-12011267) NAE85 Engine: refer to the NAE85 Commissioning Guide (LIT-12011044)For Commissioning information about the newest network engine models, or for steps on how toreplace an NAE with an SNE, or an NCE with an SNC, refer to the following literature: SNE: refer to the SNE Commissioning Guide (LIT-12013352) SNC: refer to the SNC Commissioning Guide (LIT-12013295)For information about Commissioning an NAE to use the built-in third-party integrations, refer tothe specific network engine document that covers the integration that you want to add, listed inTable of changesThe following information is new or revised.

6 Updated Release to as the latest release for affected network engines Added Metasys UI on NAE85 Updated the end of the Site Management Portal user interface section with information on theSC Network Port and Update objects in the navigation tree Updated Troubleshooting guide7 NAE Commissioning Guide Replaced Determining the NAE SNE IP address by using the NCT with Determining the NAE IPaddress by using the SCT Pro Removed references to Open Data Server (ODS) as it is discontinued at Release Updated Technical specifications - NCE, NAE, and NIE models Added a note to Appendix: Certificate Management regarding BACnet/SC certificates Removed references to the NAE-S (MS-NAE551S-2) model as it was discontinued from July 2021 Replaced the term Master with Manager where appropriateRelated documentationTable 1: NAE Related documentationFor information onSee documentOverview of the Metasys system network features andfunctionsMetasys System Configuration Guide (LIT-12011832)Definition of terms, concepts, and acronyms commonlyused to describe the Metasys SystemMetasys System Extended ArchitectureGlossary Technical Bulletin (LIT-1201612)General network and information technologydefinitions and concepts, and creating a printer DDA foran NAEN etwork and IT Guidance Technical Bulletin(LIT-12011279)Metasys Site Management Portal Help(LIT-1201793)Daily Operation of the Metasys system network,navigating the SMP UI or SCT UI, monitoring andcontrolling BAS networks, and connecting to cloud-based applicationsSCT: System Configuration Tool Help(LIT-12011964)Installation considerations and guidelines, mounting,wiring, and starting up an SNESNE Network Engine Installation Guide (Part No.)

7 24-10143-01647)Installation considerations and guidelines, mounting,wiring, and starting up an SNCSNC Network Engine Installation Guide (Part No. 24-10143-01892)Installation considerations and guidelines, mounting,wiring, and starting up an NCE25 NCE25 Installation Instructions (Part )Installation considerations and guidelines, mounting,wiring, and starting up an NAE35 or NAE45 NAE35/NAE45 Installation Instructions (PartNo. 24-10050-6)Installation Considerations and Guidelines, Mounting,Wiring, and Starting up an NAE55 or NIE55 NAE55/NIE55 Installation Instructions (PartNo. 24-10051-43)Installation considerations and guidelines, mounting,wiring, and starting up an NAE-SNAE55-S Installation Instructions (Part )Additional guidelines for Commissioning andconfiguring and NCE25 Network EnginesNCE Technical Bulletin (LIT-12011267)Additional guidelines for Commissioning andconfiguring and SNE Network EnginesSNE Commissioning Guide (LIT-12013352)Additional guidelines for commissioningand configuring and SNE Network EnginesAdditional guidelines for Commissioning andconfiguring and SNC Network EnginesSNC Commissioning Guide (LIT-12013295)Additional guidelines for Commissioning NAE85network enginesNAE85 Commissioning Guide (LIT-12011044)NAE Commissioning Guide8 Table 1.

8 NAE Related documentationFor information onSee documentAdditional guidelines for Commissioning NxE89network enginesNIE89 Commissioning Guide (LIT-12011920) Commissioning an NAE for the Modbus protocolAdditional guidelines for commissioningand Network Engine Commissioning forModbus Vendor Integration ApplicationNote (LIT-12013150) Commissioning an NAE for the M-Bus protocolNetwork Engine Commissioning forM-Bus Integration Application Note(LIT-12013149) Commissioning an NAE for the KNX protocolNetwork Engine Commissioning for KNXV endor Integration Application Note(LIT-12013148) Commissioning an NAE for the C CURE 9000 and victorvideo management system integrationNAE Commissioning for C CURE-victor Integration Application Note(LIT-12013151) Commissioning an NAE for the Zettler MX Speak Engine Commissioning forZettler MX Speak Vendor IntegrationApplication Note (LIT-12013269) Commissioning an NAE for the OPC UA integrationNetwork Engine Commissioning for OPC UAClient Vendor Integration Application Note(LIT-12013545) Commissioning NIEx9 network enginesNIEx9 Commissioning Guide (LIT-12011922)Updating the NAE/NIE disk image to new softwarerelease versionsNAE Update Tool Help (LIT-12011524)Installing the ADS and ADX softwareMetasys Server Installation and UpgradeInstructions Wizard (LIT-12012162)Installing the ADS-Lite softwareMetasys Server Lite Installationand Upgrade Instructions Wizard(LIT-12012258)Installing the OAS softwareOpen Application Server Installation andUpgrade Instructions (LIT-12013222)Installing the SCT softwareSCT Installation and Upgrade InstructionsWizard (LIT-12012067)Creating, editing, and loading archive databases withthe SCTSCT: System Configuration Tool Help(LIT-12011964)Managing Trusted Certificates Created for NetworkEnginesSCT.

9 System Configuration Tool Help(LIT-12011964)Integrating N2 Devices into the Metasys SystemNetworkN2 Integration with the NAE TechnicalBulletin (LIT-1201683)How to install the CCT softwareCCT Installation Instructions (LIT-12011529)Using the CCTC ontroller Tool Help (LIT-12011147)9 NAE Commissioning GuideTable 1: NAE Related documentationFor information onSee documentNAE/NCE BACnet protocol conformanceNAE/NCE Protocol ImplementationConformance Statement (LIT-1201532)SNE/SNC BACnet protocol conformanceSNE/SNC Protocol ImplementationConformance Statement (LIT-12013355)How to set up a local or remote MS/TP communicationsbusMS/TP Communications Bus TechnicalBulletin (LIT-12011034)Enabling NAEs to communicate with MS/TP controllersover wireless mesh networksZFR1800 Series Wireless Field Bus SystemTechnical Bulletin (LIT-12011295)Integrating LonWorks devices into the Metasys systemnetworkLonWorks Network Integration withNetwork Engines and LCS Technical Bulletin(LIT-1201668)Migrating N1 networks to the Metasys system networkN1 Migration with the NIE TechnicalBulletin (LIT-1201535)Integrating local and remote BACnet/SC devices intothe Metasys system networkBACnet/SC Workflow Technical Bulletin(LIT-12013959)

10 Integrating local and remote BACnet MS/TP and BACnetIP devices into the Metasys system networkBACnet Controller Integration TechnicalBulletin (LIT-1201531)Security issues, including adding users and roles tothe system and configuring standard and basic accessmodesSecurity Administrator System TechnicalBulletin (LIT-1201528)Installing the Launcher applicationLauncher Installation Instructions(LIT-12011783)Using the Launcher, accessing a Metasys systemnetwork through dial-up connectionsLauncher Tool Help (LIT-12011742)Dialing into a Metasys system network from acomputerMetasys System Direct Connection andDial-Up Connection Application Note(LIT-1201639)NAE Commissioning overviewNetwork Automation Engines (NAEs)NAEs are web-enabled, Ethernet-based, supervisory controllers that connect BAS networks to IPnetworks and the web, and allow you to monitor and control BAS field devices from a computerusing the Launcher application. You use the Launcher application to log in to the NAE.