Network Camera - Hikvision

1 Network Camera User Manual Hikvision Digital Technology Co., Ltd. User Manual of Network Camera 1 Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to Network Camera . This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual. We will readily improve or update the products or procedures described in the manual. DISCLAIMER STATEMENT Underwriters Laboratories Inc. ( UL ) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as outlined in UL s Standard(s) for Safety, UL60950 1. UL Certification does not cover the performance or reliability of the security or s ignaling aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.

2 Hikvision Digital Technology Co., Ltd. All Rights Reserved. User Manual of Network Camera 2 Hikvision Digital Technology Co., Ltd. All Rights Reserved. Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, use s, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.

3 This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity St atement This product and if applicable the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC. 2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed ofas unsorted municipal waste in the European Union. For proper recycling, return thisproduct to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).

4 For pr oper recycling, return the battery to your supplier or to a designated collection point. For more information see: User Manual of Network Camera 3 Hikvision Digital Technology Co., Ltd. All Rights Reserved. Safety Warnings and Cautions Please pay attention to the following warnings and cautions: Hazardous Voltage may be present: Special measures and precautions must be taken when using this device. Some potentials (voltages) on the device may present a hazard to the user. This device should only be used by employees from our company with knowledge and training in working with these types of devices that contain live circuits. Power Supply Hazardous Voltage: AC mains voltages are present within the power supply assembly. This device must be connected to a UL approved, completely enclosed power supply, of the proper rated voltage and current. No user serviceable parts inside the power supply. System Grounding (Earthing): To avoid shock, ensure that all AC wiring is not exposed and that the earth grounding is maintained.

5 Ensure that any equipment to which this device will be attached is also connected to properly wired grounded receptacles and are approved medical devices. Power Connect and Disconnect:The AC po wer supply cord is the main disconnect device to mains (AC power).The socket outlet shall be installed near the equipment and shall be readily accessible. Installation and Maintenance:Do not connect/disconnect any cables to or perform installation/maintenance on this device during an electrical storm. User Manual of Network Camera 4 Hikvision Digital Technology Co., Ltd. All Rights Reserved. Power Cord Requirements: The connector that plugs into the wall outlet must be a grounding type male plug designed for use in your region. It must have certification marks showing certification by an agency in your region. The connector that plugs into the AC receptacle on the power supply must be an IEC 320, sheet C13, female connector. See the following website for more information Lithium Battery:This device contains a Lithium Battery.

6 There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the vendor s instructions and in accordance with local environmental regulations. Perchlorate Material: Special handling may apply. See This notice is required by California Code of Regulations, Title 22, Division , Chapter 33: Best Management Practices for Perchlorate Materials. This device includes a battery which contains perchlorate material. Taiwan battery recycling: Please recycle batteries. nd ich t on his equipment. Thermal and Mechanical Injury:Some components such as heat sinks, power regulators, and processors may be hot; care should be taken to avoid contact with these components. Electro Magnetic Interference:This equipment has not been tested for compliance with emissions limits of FCC and similar international regulations. This device is not, amay not be, offered for sale or lease, or sold, or leased until authorization from the United States FCC or its equivalent in other countries has been obtained.

7 Use of this equipment in a residential location is prohibited. This equipment generates, uses and can radiate radio frequency energy whmay result in harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmenand off, the user is required to take measures to eliminate the interference or discontinue the use oft User Manual of Network Camera 5 Hikvision Digital Technology Co., Ltd. All Rights Reserved. Lead Content: Please recycle this device in a responsible manner. Refer to local environmental regulations for proper recycling; do not dispose of device in unsorted municipal waste. nded to ensure that the user can use the product correctly to avoid Cautions: Injury or equipment damage may be caused if any of these cautions are neglected. Safety Instruction These instructions are intedanger or property loss. The precaution measure is divided into Warnings and Cautions : Warnings: Serious injury or death may be caused if any of these warnings are neglected.

8 Warn to prevent serious injury or death. Cautntial injury or material damage. ings Follow these safeguardsions Follow these precautions to prevent poteWarnings: oduct, you must strictly comply with the electrical safety regulations of the nation and region. ) e sufficient power .(Whether supporting PoE power supply lies on the specific Camera model) 4. Please make sure that the plug is firmly inserted into the power socket. 5. When the product is installed on a wall or ceiling, the device should be firmly fixed. 1. In the use of the pr2. Source with DC 12V or AC 24V (Whether supporting AC 24V lies on the specific Camera modelaccording to the IEC60950 1 standard. Please refer to technical specifications fo r more details. 3. Do not connect several devices to one power adapter as an adapter overload may cause over heating and can be a fire hazard. If use the POE as the power supply, please make sure that the POE Switch have thUser Manual of Network Camera 6 Hikvision Digital Technology Co.

9 , Ltd. All Rights Reserved. 6. If smoke, odor, or noise rise from the device, turn off the power at once and unplug the power all not assume any responsibility for problems caused by unauthorized repair or maintenance.) cable, then contact the service center. 7. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the Camera yourself. (We shUser Manual of Network Camera 7 Cautions: 1. Make sure the power supply voltage is correct before using the Camera . 2. Do not drop the Camera or subject it to physical shock. 3. Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently. If the Camera will not be used for an extended period of time, put on the lens cap to protect the sensor from dirt. 4. Do not aim the Camera at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time.

10 5. The sensor may be burned out by a laser beam, so when any laser equipment is being used, make sure that the surface of the sensor will not be exposed to the laser beam. 6. Do not place the Camera in extremely hot or cold temperatures (the operating temperature should be between 10 C~+60 C, dusty or damp locations, and do not expose it to high electromagnetic radiation. 7. To avoid heat accumulation, good ventilation is required for a proper operating environment. 8. While shipping, the Camera should be packed in its original packing, or packing of the same texture. 9. Regular part replacement: a few parts ( electrolytic capacitor) of the equipment should be replaced regularly according to their average life time. The average time varies because of differences between operating environment and usage history, so regular checking is recommended for all users. Please contact with your dealer for more details. 10. Improper use or replacement of the battery may result in hazard of explosion.)