OMNIKEY 5427CK Reader - HID Global
OMNIKEY® 5427CK supports low and high frequency technology within a single device that enables seamless credential migration and mixed technology environments. The reader includes support for a wide range of low and high frequency card technologies, including HID Prox®, Indala® and EM Prox®, MIFARE® Classic,
Tags:
Global, Frequency, Reader, Hid global, Omnikey, Omnikey 5427ck reader, 5427ck
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document:
Advertisement
Documents from same domain
multiCLASS SE Readers - HID Global
www.hidglobal.comEnvironmental Rating Indoor/Outdoor IP55; IP65 if installed with optional gasket (IP65GSKT) Transmit Frequency 13.56 MHz & 125 kHz 13.56 MHz Card Compatibility Secure Identity Object™ (SIO®) on iCLASS Seos, iCLASS SE/SR, MIFARE DESFire EV1 and MIFARE Classic (On by Default) - standard iCLASS Access Control Application (order with Standard ...
multiCLASS SE Readers - HID Global
www.hidglobal.comPHYSICAL ACCESS SOLUTIONS hidglobal.com multiCLASS SE® Readers HIGHLY ADAPTABLE AND SECURE HIGH FREQUENCY ACCESS CONTROL SOLUTION Powerfully Secure – Provides layered security beyond the card media for added protection to identity data using SIOs.
Global, Reader, Hid global, Hidglobal, Multiclass se readers, Multiclass, Com multiclass se, 174 readers
FARGO® DTC1250e - HID Global
www.hidglobal.comThe FARGO® DTC1250e is built with Genuine HID® technology and is fully interoperable with other products in the HID ecosystem, enabling organizations to leverage their existing technology investments. hidglobal.com
iCLASS SE® / multiCLASS SE® - HID Global
www.hidglobal.com1 – 10-pin Terminal connector. Recommended • Cable, 5-9 conductor (Wiegand or Clock-and-Data), 4 conductor Twisted Pair Over-All Shield and UL approved, Belden3107A or equivalent (OSDP) • Linear DC power supply • Metal or plastic junction box • Security tool (for anti-tamper screw) HID 04-0001-03 • Drill with various bits for ...
HID Proximity
www.hidglobal.comMiniProx® 125 kHz mullion mount proximity card reader Base Part Number • 5365, 5368 • Power requirements: 5-16 VDC • Dimensions: 6.0˝ x 1.7˝ x 1.0˝ (15.2 cm x 4.3 cm x 1.91 cm) • Read Range: up to 5.5˝ (14.0 cm)* Thinline® II 125 kHz low profile proximity card reader Base Part Numbers • 5395, 5398
FARGO® DTC4500e - HID Global
www.hidglobal.comThe DTC4500e combines high security and convenience to easily print what you need, including: Built-in security with password-protected printer operation and fluorescent panel printing for a cost-effective and dynamic increase in card security SmartScreen™ graphical display provides easy-to-follow prompts so you’ll always
Security, Global, Convenience, Hid global, Security and convenience
FARGO® DTC1250e - HID Global
www.hidglobal.comPrint Security Resin scramble option: The system can hide any information printed with a resin panel - rendering the panel unreadable Accepted Standard Card Sizes CR-80 (3.375˝L x 2.125˝W / 85.6 mm L x 54 mm W); CR-79 adhesive back (3.313˝L x 2.063˝W / 84.1 mm L x 52.4 mm W)
PROXPRO WIEGAND/CLOCK AND-DATA - HID Global
www.hidglobal.comresistant unit is approved for outdoor use. The enclosure is designed to fit on a single gang electrical box. A Bi-color LED and audible tone enhance user feedback. A tamper switch feature is a vailable that will alert the Host when the enclosure is …
Data, Global, Clock, Resistant, Hid global, Metpar, Wiegand, Proxpro wiegand clock and data, Proxpro
HID® Mercury™ MR52-S3 Controller
www.hidglobal.comHost Communication RS–485, 2-WIRE, 4,000’ (twisted pair with shield, Belden 9841) Reader Ports 2 Reader Ports* Card/Keyboard Data OSDP, Clock/Data, Data–1/Data–0, RS-485, or F/2F Keypad 8-bit Mercury, 8-bit Dorado/HID, 4-bit HID Reader Power Pass-through or 12 VDC regulated 300mA each reader LED One-wire bi-color LED or two-wire LED
FARGO DTC1250e, DTC1000Me, DTC4250e, and ... - HID Global
www.hidglobal.comHaverhill Business Park Phoenix Road Haverhill, Suffolk CB9 7AE England Phone: 44 (0) 1440 711 822 Fax: 44 (0) 1440 714 840 Condomínio Business Center ... installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
Related documents
Radio Frequency IDentification - RFID
www.cse.wustl.edu3.2 Frequency Bands RFID tags fall into three regions in respect to frequency: Low frequency (LF, 30 - 500kHz) High frequency (HF, 10 - 15MHz) Ultra high frequency (UHF, 850 - 950MHz, 2.4 - 2.5GHz, 5.8GHz) Low frequency tags are cheaper than any of the higher frequency tags. They are fast enough for most
Si570/Si571 10 MHz to 1.4 GHz I2C Programmable XO/VCXO
www.skyworksinc.comcircuitry to provide a low-jitter clock at any frequency. The Si570/Si571 are user-programmable to any output frequency from 10 to 945MHz and select frequencies to 1400MHz with <1ppb resolution. The device is programmed via an I2C serial interface. Unlike traditional XO/VCXOs where a different crystal is required for
Model CB3 & CB3LV
www.ctscorp.com7.0mm x 5.0mm Low Cost HCMOS/TTL Clock Oscillator CB3 L L ELECTRICAL PARAMETERS CC Logic '0' Level 0.4 C Enable Input Voltage Standby Current ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL MIN TYP MAX UNIT Maximum Supply Voltage V CC-0.5 - +7.0 V Storage Temperature T STG-40 - +100 °C Frequency Range 1.5 - 107 CB3LV …
MMCM and PLL Dynamic Reconfiguration Application Note
www.xilinx.comFrequency, phase, and duty cycle can all be changed Application Note: 7 Series, UltraScale, and UltraScale+ FPGAs ... •Low Time •No Count •Edge ... CP LF VCO 9 O0 M O1 O2 O3 O4 O5 O6 x888_01_122211 8-Phase Taps + 1 Variable Phase Tap
DC-DC Converters Feedback and Control
www.onsemi.comUndershoot and crossover frequency Compensating the converter Compensating with a TL431 Watch the optocoupler! ... let us study an RLC low-pass filter, a 2nd order system 3 2 R1 {R} 1 L1 {L} C1 {C} Vout parameters f0=235k ... Lf L out C out R …
Surface-Mount Schottky Barrier Rectifier
www.vishay.com• Low profile package • Ideal for automated placement • Guardring for overvoltage protection • Low power losses, high efficiency • Low forward voltage drop • High surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3