Operator’s Manual - k2dt.com

1 operator s ManualGS-1530GS-1532GS-1930GS-1932GS-203 2GS-2632GS-3232GS-2046GS-2646GS-3246 Fifth EditionThird PrintingPart No. 114313with Maintenance Informationwith Maintenance InformationCE operator 's ManualGS-30 GS-32 GS-46 Part No. 114313 Fifth Edition Third PrintingCopyright 1997 by Genie IndustriesFifth Edition:Third Printing, February 2008"Genie" is a registered trademark ofGenie Industries in the and many othercountries. "GS" is a trademark of GenieIndustries. Printed on recycled paperPrinted in , understand and obey these safety rules andoperating instructions before operating this trained and authorized personnel shall bepermitted to operate this machine. This manualshould be considered a permanent part of yourmachine and should remain with the machine at alltimes.

2 If you have any questions, call Genie 1 Symbol and Hazard Pictorials Definitions .. 3 General 5 Personal 7 Work Area Safety .. 16 Controls .. 23 Operating Instructions .. 38 Transport and Lifting Instructions .. 52 Contact us:Internet: : ManualFifth Edition Third PrintingPart No. 114313GS-30 GS-32 GS-461 IntroductionDangerFailure to obey the instructions andsafety rules in this Manual willresult in death or serious Not Operate Unless:You learn and practice the principles of safemachine operation contained in this operator ' Avoid hazardous and understand the safety rules beforegoing on to the next Always perform a pre-operation Always perform function tests prior to Inspect the Only use the machine as it was read, understand and obey themanufacturer's instructions and safety rules safety and operator 's manuals and read, understand and obey employer'ssafety rules and work site read, understand and obey all applicablegovernmental are properly trained to safely operate , Users and Operators:Genie appreciates your choice of our machine foryour application.

3 Our number one priority is usersafety, which is best achieved by our joint feel that you make a major contribution tosafety if you, as the equipment users andoperators:1 Comply with employer, job site andgovernmental Read, understand and follow the instructionsin this and other manuals supplied with Use good safe work practices in acommonsense Only have trained/certified operators, directedby informed and knowledgeable supervision,running the there is anything in this Manual that is not clearor which you believe should be added, pleasecontact : : ManualFifth Edition Third Printing2GS-30 GS-32 GS-46 Part No. 114313 Intended UseThis machine is intended to be used only to liftpersonnel, along with their tools and materials to anaerial work Sign MaintenanceReplace any missing or damaged safety operator safety in mind at all times.

4 Use mildsoap and water to clean safety signs. Do not usesolvent-based cleaners because they may damagethe safety sign ClassificationGenie uses symbols, color coding and signalwords to identify the following:Safety alert symbol used to alertyou to potential personal injuryhazards. Obey all safetymessages that follow this symbolto avoid possible injury or a hazardous situationwhich, if not avoided, will result indeath or serious a hazardous situationwhich, if not avoided, could resultin death or serious a hazardous situationwhich, if not avoided, could resultin minor or moderate a hazardous situationwhich, if not avoided, could resultin property 's ManualFifth Edition Third PrintingPart No. 114313GS-30 GS-32 GS-463 Symbol and Hazard Pictorials DefinitionsRead theoperator smanualRead theservicemanualTip-over hazardCrush hazardCrush hazardCollision hazardTip-over hazardTip-over hazardTip-over hazardElectrocutionhazardElectrocutionha zardExplosion hazardFire hazardBurn hazardSkin injectionhazardKeep away frommoving partsEngage safetyarmKeep clear ofoutriggers andtiresMove machine tolevel groundLower theplatformMaintain requiredclearanceDo not set upwhere it cannotbe leveled withoutriggersClose chassistrayOnly trainedmaintenancepersonnel shouldaccesscompartmentsUse a piece ofcardboard orpaper to searchfor leaksOperator's ManualFifth Edition Third Printing4GS-30 GS-32 GS-46 Part No.

5 114313 Symbol and Hazard Pictorials DefinitionsWheel loadVoltage rating forpower to platformPressure ratingfor air line toplatformGrounded AC3-wire onlyReplace damagedwires and cordsNo smokingBatteries used ascounterweightsLanyardattachment pointTiedownChock the wheelsRelease brakesTransportdiagramWindspeedSide forceMaximum capacityIndoorOutdoorOperator's ManualFifth Edition Third PrintingPart No. 114313GS-30 GS-32 GS-465 General SafetySafety signs and locations114371 A114338 A1282487 B82560 B82475 C82476 B82562 B82475 C82487 B82474 B82473 COperator's ManualFifth Edition Third Printing6GS-30 GS-32 GS-46 Part No. 114313 General SafetySafety signs and locations82476 B114337 A82481 B82475 C82474 B82562 B114334 A=153 kg114370 A82475 COperator's ManualFifth Edition Third PrintingPart No.

6 114313GS-30 GS-32 GS-467 Personal SafetyFall ProtectionPersonal fall protection equipment (PFPE) is notrequired when operating this machine. If PFPE isrequired by job site or employer rules, the followingshall apply:All PFPE must comply with applicablegovernmental regulations and must be inspectedand used in accordance with the manufacturer 's ManualFifth Edition Third Printing8GS-30 GS-32 GS-46 Part No. 114313 Electrocution HazardsThis machine is not electrically insulated and willnot provide protection from contact with orproximity to electrical safe distances from electrical powerlines and apparatus in accordance with applicablegovernmental regulations and the following VoltageRequired Clearance0 to m50KV to m200KV to m350KV to m500KV to m750KV to mAllow for platform movement, electrical line swayor sag and beware of strong or gusty away from the machine if it contactsenergized power lines.

7 Personnel on the ground orin the platform must not touch or operate themachine until energized power lines are shut not operate the machine during lightning not use the machine as a ground for welding. Tip-over HazardsOccupants, equipment and materials must notexceed the maximum platform without capacity indicator:Maximum CapacityGS-1530 and GS-1532272 kgGS-1930 and GS-1932227 kgGS-2032363 kgGS-2632227 kgGS-3232227 kgGS-2046544 kgGS-2646454 kgGS-3246318 kgModels with capacity indicator:The maximum capacity varies with the height of Capacity - GS-1530 and GS-1532 Height of platformMaximum m272 kg4 m390 m484 m390 kg1 m344 kgMaximum Capacity - GS-1930 and GS-1932 Height of platformMaximum m227 m320 m435 m320 kg1 m227 kgWork Area SafetyOperator's ManualFifth Edition Third PrintingPart No.

8 114313GS-30 GS-32 GS-469 Work Area SafetyMaximum Capacity - GS-2032 Height of platformMaximum Capacity6 m363 m512 m693 m608 kg1 m454 kgMaximum Capacity - GS-2632 Height of platformMaximum m227 m442 m479 m409 kg1 m281 kgMaximum Capacity - GS-3232 Height of platformMaximum m227 m344 m498 m433 kg1 m227 kgMaximum Capacity - GS-2046 Height of platformMaximum Capacity6 m544 m744 m985 m873 kg1 m635 kgMaximum Capacity - GS-2646 Height of platformMaximum m454 m744 m798 m701 kg1 m454 kgMaximum Capacity - GS-3246 Height of platformMaximum m318 m483 m699 m608 kg1 m318 kgOperator's ManualFifth Edition Third Printing10GS-30 GS-32 GS-46 Part No. 114313 Work Area SafetyDo not raise the platform unless the machine is ona firm, level not depend on the tilt alarm as a level tilt alarm sounds on the chassis only when themachine is on a the tilt alarm sounds:Lower the platform.

9 Move the machine to a firm,level surface. If the tilt alarm sounds when theplatform is raised, use extreme caution to lowerthe not drive over km/h with the platform Use: Do not raise the platform when windspeeds may exceed m/s. If wind speedsexceed m/s when the platform is raised, lowerthe platform and do not continue to operate Use: When raising the platform, followratings for allowable side force and number ofoccupants on the next not operate the machine in strong or gustywinds. Do not increase the surface area of theplatform or the load. Increasing the area exposedto the wind will decrease machine extreme care and slow speeds while drivingthe machine in a stowed position across uneventerrain, debris, unstable or slippery surfaces andnear holes and not drive the machine on or near uneventerrain, unstable surfaces or other hazardousconditions with the platform not use the machine as a not push the machine or other objects with not contact adjacent structures with not tie the platform to adjacent not place loads outside the platform not operate the machine with the chassis 's ManualFifth Edition Third PrintingPart No.

10 114313GS-30 GS-32 GS-4611 Work Area SafetyDo not push off or pull toward any object outside ofthe allowable Manual forceMaximumModelManual ForceOccupantsGS-1530400 NIndoor use only - 2GS-1532400 NIndoor - 2200 NOutdoor - 1GS-1930 400 NIndoor use only - 2GS-1932400 NIndoor - 2200 NOutdoor - 1GS-2032400 NIndoor - 2200 NOutdoor - 1GS-2632400 NIndoor use only - 2GS-3232400 NIndoor use only - 2GS-2046400 NIndoor/Outdoor - 2GS-2646400 NIndoor/Outdoor - 2GS-3246400 NIndoor - 2200 NOutdoor - 1Do not alter or disable the limit not alter or disable machine components that inany way affect safety and not replace items critical to machine stabilitywith items of different weight or not use batteries that weigh less than theoriginal equipment.