Optocoupler, Phototransistor Output, High …

1 Semiconductors Rev. , 21-Apr-171 Document Number: 83671 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT , Phototransistor Output, High Reliability, 5300 VRMSDESCRIPTIONThe SFH6156 features a variety of transfer ratios, low coupling capacitance and high isolation voltage. This coupler has a GaAs infrared diode emitter, which is optically coupled to a silicon planar Phototransistor detector, and is incorporated in a plastic SMD coupling devices are designed for signal transmission between two electrically separated Excellent CTR linearity depending on forward current Isolation test voltage, 5300 VRMS Fast switching times Low CTR degradation Low coupling capacitance Material categorization.

2 For definitions of compliance please see Switchmode power supply Telecom Battery powered equipmentAGENCY APPROVALSThe safety application model number covering all products in this datasheet is SFH615A. This model number should be used when consulting safety agency documents. UL1577, file no. E52744 system code H or J, double protection DIN EN 60747-5-5 (VDE 0884-5) available with option 1 cUL tested to CSA bulletin 5A BSI IEC 60950, IEC 60065 FIMKO EN6005, EN60950-1 CQC G8898-2011 ECAC124317448-51 ORDERING INFORMATIONSFH6156 - #X001 TPART NUMBERCTR BINPACKAGE OPTIONTAPEANDREELAGENCY CERTIFIED/PACKAGECTR (%)

3 10 mAUL, cUL, BSI, FIMKO, CQC40 to 8063 to 125100 to 200160 to 320 SMD-4, 100 mil, pitchSFH6156-1 SFH6156-2 SFH6156-3 SFH6156-4 SFH6156-1 TSFH6156-2 TSFH6156-3 TSFH6156-4 TVDE, UL, cUL, BSI, FIMKO, CQC40 to 8063 to 125100 to 200160 to 320 SMD-4, 100 mil, pitchSFH6156-1X001 SFH6156-2X001 SFH6156-3X001-SFH6156-1X001 TSFH6156-2X001 TSFH6156-3X001 TSFH6156-4X001T--SFH6156-3X001T1-SMD-4> 8 Semiconductors Rev. , 21-Apr-172 Document Number: 83671 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Stresses in excess of the absolute maximum ratings can cause permanent damage to the device.

4 Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability(1)Refer to reflow profile for soldering conditions for surface mounted devices (SMD)Fig. 1 - Permissible Power Dissipation vs. Ambient TemperatureABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified)PARAMETERTEST CONDITIONSYMBOLVALUEUNITINPUTR everse voltageVR6 VDC forward currentIF60mASurge forward currenttp 10 emitter voltageVCEO70 VEmitter collector voltageVECO7 VCollector currentIC50mAtp 1 msIC100mACOUPLERS torage temperature rangeTstg-55 to +150 CAmbient temperature rangeTamb-55 to +100 CSoldering temperature (1)max.

5 10 sTsld260 C0501001502000 25507510012515018483 Ptot - Power Dissipation (mW)PhototransistorDiodeTamb - Ambient Temperature ( C) Semiconductors Rev. , 21-Apr-173 Document Number: 83671 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT The thermal model is represented in the thermal network below. Each resistance value given in this model can be used to calculate the temperatures at each node for a given operating condition. The thermal resistance from board to ambient will be dependent on the type of PCB, layout and thickness of copper traces.

6 For a detailed explanation of the thermal model, please reference vishay s thermal characteristics of optocouplers application note(1)For 2 layer FR4 board (4" x 3" x ")Note Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirementsTHERMAL CHARACTERISTICSPARAMETERSYMBOLVALUEUNITL ED power dissipationPdiss100mWOutput power dissipationPdiss150mWMaximum LED junction CMaximum output die junction CThermal resistance, junction emitter to board EB173 C/WThermal resistance, junction emitter to case EC149 C/WThermal resistance, junction detector to board DB111 C/WThermal resistance, junction detector to case DC127 C/WThermal resistance, junction emitter to junction detector ED95 C/WThermal resistance, board to ambient (1)

7 BA195 C/WThermal resistance, case to ambient (1) CA3573 C/WELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETERTEST Forward voltageIF = 60 currentVR = 6 ACapacitanceVR = 0 V, f = 1 MHzCO-13-pFOUTPUTC ollector emitter capacitanceVCE = 5 V, f = 1 pFCollector emitter leakage currentVCE = 10 VSFH6156-1 ICEO-250nASFH6156-2 ICEO-250nASFH6156-3 ICEO-5100nASFH6156-4 ICEO-5100nACOUPLERC ollector emitter saturation voltageIF = 10 mA, IC = pFTA CATCTJDTJETB EC EB DC DB BA Semiconductors Rev. , 21-Apr-174 Document Number: 83671 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

8 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT TRANSFER RATIOPARAMETERTEST = 10 mA, VCE = 5 VSFH6156-1 CTR40-80%SFH6156-2 CTR63-125%SFH6156-3 CTR100-200%SFH6156-4 CTR160-320%IF = 1 mA, VCE = 5 VSFH6156-1 CTR1330-%SFH6156-2 CTR2245-%SFH6156-3 CTR3470-%SFH6156-4 CTR5690-%SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified)PARAMETERTEST timeIF = 10 mA, VCC = 5 V, RL = 75 ton-3- sRise timeIF = 10 mA, VCC = 5 V, RL = 75 tr-2- sTurn-off timeIF = 10 mA, VCC = 5 V, RL = 75 sFall timeIF = 10 mA, VCC = 5 V, RL = 75 tf-2- sCut-off frequencyIF = 10 mA, VCC = 5 V.

9 RL = 75 fCO-250-kHzSATURATEDTurn-on timeIF = 20 mASFH6156-1ton-3- sIF = 10 sIF = 5 mASFH6156-4ton-6- sRise timeIF = 20 mASFH6156-1tr-2- sIF = 10 mASFH6156-2tr-3- sSFH6156-3tr-3- sIF = 5 mASFH6156-4tr-4- sTurn-off timeIF = 20 mASFH6156-1toff-18- sIF = 10 mASFH6156-2toff-23- sSFH6156-3toff-23- sIF = 5 mASFH6156-4toff-25- sFall timeIF = 20 mASFH6156-1tf-11- sIF = 10 mASFH6156-2tf-14- sSFH6156-3tf-14- sIF = 5 mASFH6156-4tf-15- Semiconductors Rev. , 21-Apr-175 Document Number: 83671 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT As per IEC 60747-5-5, , this optocoupler is suitable for safe electrical insulation only within the safety ratings.

10 Compliance with the safety ratings shall be ensured by means of protective circuitsTYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified)Fig. 2 - Linear Operation (without saturation)Fig. 3 - Switching Operation (with saturation)Fig. 4 - Current Transfer Ratio (typ.) vs. TemperatureFig. 5 - Output Characteristics (typ.) Collector Current Emitter VoltageSAFETY AND INSULATION RATINGSPARAMETERTEST CONDITIONSYMBOLVALUEUNITC limatic classificationAccording to IEC 68 part 155/100/21 Comparative tracking indexCTI175 Maximum rated withstanding isolation voltaget = 1 minVISO4420 VRMSM aximum transient isolation voltageVIOTM10 000 VMaximum repetitive peak isolation voltageVIORM890 VIsolation resistanceVIO = 500 V, Tamb = 25 CRIO 1012 VIO = 500 V.