Owner’s Guide - Service - Home

1 PLAY your music in ANY room at any owner s GuideWi-Fi Speakers: W50 | W100 | W200 Smart Wi-Fi SpeakerRevision 031715 Revision 061615 Model: W50 / W100 / W200 Serial No. _____CONGRATULATIONST hank you for purchasing this Hitachi read these instructions additional assistance please call Toll ( )or visit our website at this owner s Guide for future the serial number of yourWi-Fi speaker for future reference. This informationis located on the bottom of the speaker lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

2 WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THE AC PLUG WITH AN EXTEN-SION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

3 This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna.

4 - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for : To comply with FCC RF exposure compliance requirements, a separation distance of at least 8 inches must be maintained between this device and all persons. This Transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user s authority to operate this / RECYCLE NOTICE This product may contain lead and should be disposed or recycled according to local electronic waste (e-waste) laws.

5 For product recycling and disposal information, contact your local government agency or (in California), the Electronic Industries Alliance at (in the ) or the Electronic Product Stewardship Canada at (in Canada). FOR MORE INFORMATION, call ( ) (USA/CANADA).CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER Service -ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED Service PERSONNEL. 41) Read these ) Keep these ) Heed all ) Follow all ) Do not use this apparatus near ) Clean only with dry ) Do not block any ventilation openings.

6 Install in accordance with the manufacturer s ) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce ) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete ) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the ) Only use attachments/accessories specified by the ) Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

7 When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from ) Unplug this apparatus during lightning storms or when unused for long periods of ) Refer all servicing to qualified Service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been ) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the ) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

8 IMPORTANT SAFETY INSTRUCTIONS5 IMPORTANT SAFETY INSTRUCTIONS (continued)17) Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the ) When replacement parts are required, be sure the Service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other ) The mains plug is used as the disconnect and shall remain readily ) Only use the AC adapters that are included with this Contents Speaker Unit AC Power Adapter Quick Start Guide owner s Guide Declaration of ConformityThis device complies with part 15 of the FCC Rules.

9 Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2)This device must accept any interference received, including interference that may cause undesired operation. For questions regarding this declaration, contact: Hitachi America, Ltd. 2420 Fenton Street, Suite 200 Chula Vista, CA 91914-3556 Tel: ( ) ATTN: Customer RelationsPower sourceThis device is designed to operate on 120 volts 60 Hz, AC current. Insert the power cord into a 120 volts 60 Hz outlet. To prevent electric shock, do not use the device s (AC) plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure.

10 Never connect the device to 50 Hz, direct current, or anything other than the specified will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises may also form during the summer if the unit is exposed to the breeze from an air conditioner. In such cases, change the location of the SAFETY INSTRUCTIONS (continued)7 Product Layout 1.