Page 1/10 Safety Data Sheet - alfalaval.com

1 Page 1/10 Safety data Sheetacc. to OSHA HCSP rinting date 05/09/2018 Reviewed on 05/09/2018 Version * 1 Identification Product identifier Trade name: Lubricating Oil ISO VG 150 Article number:54609880, 54609881, 54609883 Application of the substance / the mixtureLubricating oil Details of the supplier of the Safety data Sheet Supplier:Alfa Laval Tumba ABHans Stahles v g 7S-147 80 TumbaSweden+46 8 530 650 Information department:For additional questions regarding Safety data sheets please contact your local Alfa Laval SalesCompany which you find on or in Safety data Sheet under section 16: OtherInformaion Emergency telephone number:US and Canada: 9112 Hazard(s) identification Classification of the substance or mixtureThe product is not classified according to the Globally Harmonized System (GHS).

2 Label elements GHS label elementsVoid Hazard pictogramsVoid Signal wordVoid Hazard statementsVoid Other hazards Results of PBT and vPvB assessment PBT:Not applicable. vPvB:Not applicable.* 3 Composition/information on ingredients Chemical characterization: Mixtures Description:Mixture: consisting of the following components. Dangerous components:Highly refined mineral oil (DMSO <3%, IP 346) *(* Highly refined mineral oil = Group Name: Base oil unspecified CAS / EINECS No: 101316-72-7/309-877-7; 74869-22-0/278-012-2; 64742-62-7/265-166-0; 64742-53-6/265-156-6; 64742-52-5/265-155-0; 64742-56-9/265-159-2; 64742-54-7/265-157-1; 64742 - 57-0/265-160-8 for whichDMSO <3%, IP 346 EU Directive - Group name gasoil, unspecified 64742-46-7/265-148-2satisfying remark N according to EU and Concawe Highly refined base oil 8042 -47-5/232-455-8;92045-45-9/295-426-9.)

3 US (Contd. on page 2)Page 2/10 Safety data Sheetacc. to OSHA HCSP rinting date 05/09/2018 Reviewed on 05/09/2018 Version 11 Trade name: Lubricating Oil ISO VG 150(Contd. of page 1) First-aid measures Description of first aid measures General information:In case of accident or if you feel unwell, seek medical advice immediately (show the label wherepossible).Wash contaminated clothing before reuse. After inhalation:Supply fresh air; consult doctor in case of complaints. After skin contact:Immediately wash with water and soap and rinse off immediately all contaminated skin irritation continues, consult a in use under high pressure that has been forced under the skin, is a serious situation thatrequires IMMEDIATE hospital treatment. After eye contact:Rinse opened eye for several minutes under running water.

4 If symptoms persist, consult a doctor. After swallowing:Wash the mouth with NOT induce immediate medical advice. Information for doctor: Most important symptoms and effects, both acute and delayedHigh pressure injection under skin: local skin. May cause skin dryness and irritation. Indication of any immediate medical attention and special treatment neededInformation on high pressure equipment:Accidental speed injection under the skin of this type of material can cause serious injury. Seekimmediately medical attention if an accident of this nature occurs. Even if the wound at the injectionsite does not look that severe at a first glance, it may lead to malformation or amputation of theaffected limb if not treated Fire-fighting measures Extinguishing media Suitable extinguishing agents:FoamCarbon dioxideFire-extinguishing powderUse fire fighting measures that suit the environment.

5 For Safety reasons unsuitable extinguishing agents:Water with full jet Special hazards arising from the substance or mixtureDuring heating or in case of fire poisonous gases are monoxide and carbon dioxideAldehydeHydrocarbons Advice for firefighters Protective equipment:Wear self-contained respiratory protective fully protective suit.(Contd. on page 3) US Page 3/10 Safety data Sheetacc. to OSHA HCSP rinting date 05/09/2018 Reviewed on 05/09/2018 Version 11 Trade name: Lubricating Oil ISO VG 150(Contd. of page 2) Additional informationCool endangered receptacles with water Accidental release measures Personal precautions, protective equipment and emergency proceduresDo not breathe protective equipment. Keep unprotected persons danger of slipping on leaked/spilled product.

6 Environmental precautions:Do not allow to enter sewers/ surface or ground respective authorities in case of seepage into water course or sewage system. Methods and material for containment and cleaning up:Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).Send for recovery or disposal in suitable receptacles. Reference to other sectionsSee Section 7 for information on safe Section 8 for information on personal protection Section 13 for disposal Handling and storage Handling: Precautions for safe handlingAvoid the formation of oil using do not eat, drink or contact with skin and release to the Section 8 for information on personal protection equipment. Information about protection against explosions and fires:Keep ignition sources away - Do not smoke.

7 Conditions for safe storage, including any incompatibilities Storage: Requirements to be met by storerooms and receptacles:Store in cool, dry conditions in well sealed receptacles. Information about storage in one common storage facility:Store away from oxidizing agents. Further information about storage conditions:Protect from heat and direct receptacle in a well ventilated area. Specific end use(s)Professional use Exposure controls/personal protection Additional information about design of technical systems:No further data ; see item 7.(Contd. on page 4) US Page 4/10 Safety data Sheetacc. to OSHA HCSP rinting date 05/09/2018 Reviewed on 05/09/2018 Version 11 Trade name: Lubricating Oil ISO VG 150(Contd. of page 3) Control parameters Components with limit values that require monitoring at the workplace:Highly refined mineral oil (DMSO <3%, IP 346) *(* Highly refined mineral oil = Group Name: Base oil unspecified CAS / EINECS No: 101316-72-7/309-877-7; 74869-22-0/278-012-2; 64742-62-7/265-166-0; 64742-53-6/265-156-6; 64742-52-5/265-155-0; 64742-56-9/265-159-2; 64742-54-7/265-157-1; 64742 - 57-0/265-160-8 for whichDMSO <3%, IP 346 EU Directive - Group name gasoil, unspecified 64742-46-7/265-148-2satisfying remark N according to EU and Concawe Highly refined base oil 8042 -47-5/232-455-8; 92045-45-9 (TWA) Short-term value: 5 mg/m 8 hTWAS hort-term value: 5 mg/m 8 h Additional information:The lists that were valid during the creation were used as basis.)

8 Exposure controls Personal protective equipment: General protective and hygienic measures:Wash hands before breaks and at the end of not inhale gases / fumes / only in well-ventilated not carry product impregnated cleaning cloths in trouser that washing facilities are available at the work away from foodstuffs, beverages and feed. Breathing equipment:Use suitable respiratory protective device in case of insufficient ventilation. Protection of hands:The glove material has to be impermeable and resistant to the product/ the substance/ of the glove material on consideration of the penetration times, rates of diffusion and thedegradation Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marksof quality and varies from manufacturer to manufacturer.

9 As the product is a preparation of severalsubstances, the resistance of the glove material can not be calculated in advance and has thereforeto be checked prior to the rubber, NBR Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves andhas to be observed. Eye protection:Wear eye/face protection. Body protection:Protective work clothingOil resistant protective clothing9 Physical and chemical properties Information on basic physical and chemical properties General Information Appearance:Form:Fluid(Contd. on page 5) US Page 5/10 Safety data Sheetacc. to OSHA HCSP rinting date 05/09/2018 Reviewed on 05/09/2018 Version 11 Trade name: Lubricating Oil ISO VG 150(Contd. of page 4) :Yellow Odor:Mineral-oil-like Odor threshold:Not determined.

10 PH-value:Not determined. Change in conditionMelting point/Melting point/Boiling range:Undetermined. Flash point:230 C (446 F) (ISO 2592) Flammability (solid, gaseous):Not applicable. Decomposition temperature:Not determined. Auto igniting:Product is not selfigniting. Danger of explosion:Product does not present an explosion hazard. Explosion limits:Lower:Not :Not determined. Vapor pressure:< kPa @ 20 C (<32 F) Density at 20 C (68 F):0,888 g/cm ( lbs/gal) (ISO 12185) Relative densityNot determined. Vapor densityNot determined. Evaporation rateNot determined. Solubility in / Miscibility withWater:Insoluble. Partition coefficient (n-octanol/water):log Pow >3 Viscosity:Dynamic:Not at 40 C (104 F):150 mm /s Solvent content:Organic solvents:0,0 % Other informationNo further relevant information Stability and reactivity ReactivityMaterial is stable under normal conditions.