Page 1/8 Safety Data Sheet (SDS)

1 page 1 / 8 safety data sheet (SDS)OSHA HazCom Standard 29 CFR (g) and GHS Rev date 06/12/2015 Reviewed on 06/12 * 1 Identification Product identifier Trade name: Kool Mist Formula 78 Relevant identified uses of the substance or mixture and uses advised against Product descriptionLight duty coolant for spray mist systems. Details of the supplier of the Safety data Sheet Manufacturer/Supplier:Kool Mist9218 Norwalk Fe Springs, CA 90670Ph: (562) 246-0949 Emergency telephone number:Chemtrec 800-424-93002 Hazard(s) identification Classification of the substance or mixtureGHS07 Acute Tox. 4 H302 Harmful if Irrit. 2 H315 Causes skin Irrit.

2 2B H320 Causes eye irritation. Label elements GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS). Hazard pictogramsGHS07 Signal wordWarning Hazard-determining components of labeling:Poly(ethylene glycol-ran-propylene glycol) monobutyl ether Hazard statementsHarmful if skin and eye irritation. Precautionary statementsWear protective thoroughly after not eat, drink or smoke when using this in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to swallowed: Call a poison center/doctor if you feel treatment (see supplementary first aid instructions on this Safety data Sheet ).

3 If skin irritation occurs: Get medical eye irritation persists: Get medical on skin: Wash with plenty of off contaminated clothing and wash it before reuse.(Contd. on page 2)Page 2/ 8 safety data sheet (SDS)OSHA HazCom Standard 29 CFR (g) and GHS Rev date 06/12/2015 Reviewed on 06/12/2015 Trade name: Kool Mist Formula of contents/container in accordance with local/regional/national/international regulations. Classification system: NFPA ratings (scale 0 - 4)100 Health = 1 Fire = 0 Reactivity = 0 HMIS-ratings (scale 0 - 4) HEALTH FIRE REACTIVITY100 Health = 1 Fire = 0 Reactivity = 0 Hazard(s) not otherwise classified (HNOC):None known* 3 Composition/information on ingredients Chemical characterization: Mixtures Description:Mixture of substances listed below with nonhazardous additions.

4 Dangerous Components:102-71-6 Triethanolamine, TEA Skin Irrit. 2, H315; Eye Irrit. 2B, H32020-40%9038-95-3 Poly(ethylene glycol-ran-propylene glycol) monobutyl ether Acute Tox. 2, H3001-5% Additional information:Concentration of Dangerous Components when diluted:Triethanolamine, TEA: <1%Poly(ethylene glycol-ran-propylene glycol) monoputyl ether: < First-aid measures Description of first aid measures General information:Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48hours after the accident. After inhalation:In case of unconsciousness, place patient securely on side position for transportation.

5 After skin contact:Immediately wash with water and soap and rinse skin irritation occurs, consult a doctor. After eye contact:Rinse opened eye for at least 15 minutes under running water. If symptoms persist, consult a doctor. After swallowing:Immediately call a doctor. Information for doctor: Most important symptoms and effects, both acute and delayed:No further relevant information available. Indication of any immediate medical attention and special treatment neededNo further relevant information Fire-fighting measures Extinguishing media Suitable extinguishing agents:Use fire fighting measures that suit the environment. Special hazards arising from the substance or mixtureNo further relevant information available.

6 (Contd. on page 3)Page 3/ 8 safety data sheet (SDS)OSHA HazCom Standard 29 CFR (g) and GHS Rev date 06/12/2015 Reviewed on 06/12/2015 Trade name: Kool Mist Formula Advice for firefighters Protective equipment:As in any fire, wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent),and full protective gear to prevent contact with skin and Accidental release measures Personal precautions, protective equipment and emergency proceduresNot required. Environmental precautions:Do not allow to enter sewers/ surface or ground water. Methods and material for containment and cleaning up:Absorb with liquid-binding material ( sand, diatomite, acid binders, universal binders, sawdust).

7 Dispose contaminated material as waste according to section adequate of the collected material according to regulations. Reference to other sectionsSee Section 7 for information on safe Section 8 for information on personal protection Section 13 for disposal Handling and storage Handling: Precautions for safe handlingEnsure good ventilation/exhaustion at the formation of aerosols. Information about protection against explosions and fires:No special measures required. Conditions for safe storage, including any incompatibilities Storage: Requirements to be met by storerooms and receptacles:No special requirements. Information about storage in one common storage facility:Not required.

8 Further information about storage conditions:Keep receptacle tightly sealed. Specific end use(s)No further relevant information Exposure controls/personal protection Additional information about design of technical systems:No further data ; see section 7. Control parameters Components with occupational exposure limits:102-71-6 Triethanolamine, TEATLV Long-term value: 5 mg/m Additional information:The lists that were valid during the creation of this SDS were used as basis. Exposure controls Personal protective equipment: General protective and hygienic measures:The usual precautionary measures for handling chemicals should be away from foodstuffs, beverages and remove all soiled and contaminated clothing and wash before hands before breaks and at the end of contact with the eyes and skin.

9 Breathing equipment:Not required.(Contd. on page 4)Page 4/ 8 safety data sheet (SDS)OSHA HazCom Standard 29 CFR (g) and GHS Rev date 06/12/2015 Reviewed on 06/12/2015 Trade name: Kool Mist Formula Protection of hands:Protective glovesThe glove material has to be impermeable and resistant to the product/ the substance/ the to missing tests no recommendation to the glove material can be given for the product/ the preparation/the chemical glove material based on penetration times, rates of diffusion and degradation. Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marks of qualityand varies from manufacturer to manufacturer.

10 As the product is a preparation of several substances, theresistance of the glove material cannot be calculated in advance and has therefore to be checked prior to theapplication. Penetration time of glove materialThe exact break-through time has to be determined and observed by the manufacturer of the protectivegloves. Eye protection:Tightly sealed goggles9 Physical and chemical properties Information on basic physical and chemical properties General Information Appearance:Form:LiquidColor:Green Odor:Mild Odor threshold:Not determined. pH-value:Not determined. Change in conditionMelting point/Melting range:Not point/Boiling range:100 C (212 F) Flash point:180 C (356 F) Flammability (solid, gaseous):Not applicable.