Part D: Specifying concrete for ... - BRE projects website

and basement walls and tanks within the ground. (iv) When the hydrostatic head is more than five times ... b A section thickness of 140 mm or less should be avoided in in-situ construction but where this is ... rise domestic housing with an intended working life of ‘at least 100 years’. SD1:2005 Part D – Draft 1 v7 : ...

Tags:

  Project, Construction, Domestic, Basement

Information

Documents from same domain

BEST PRACTICE GUIDES FOR IN-SITU CONCRETE …

projects.bre.co.uk

2 Introduction The use, installation and striking of falsework and backpropping* is a vitally important part of the safe and economic construction of in-situ concrete

  Practices, Installation, Best, Best practices, Concrete, Suits, In situ concrete

Part C: Assessing the aggressive chemical …

projects.bre.co.uk

SD1:2005 Part C - Draft 1 v8: 14/12/04 1 Part C: Assessing the aggressive chemical environment C1. General This Part describes the occurrence of chemicals in the

  Chemical, Assessing, Environment, Aggressive, Assessing the aggressive chemical, Assessing the aggressive chemical environment

Part A: Introduction - BRE

projects.bre.co.uk

SD1:2005 Part A – Draft 1 v14 : 16/2/05 1 Part A: Introduction A1. The problem of chemical attack Chemical agents that are destructive to concrete may

  Introduction, Part, Part a