Performance Products JEFFCAT catalysts

1 Performance Products JEFFCAT catalysts For the polyurethane industry Europe, Africa & Middle East 2 Huntsman s large and growing family of unique industry-leading JEFFCAT catalysts brings strength, power and speed to a wide range of urethane applications. The widespread use of these catalysts in making polyether and polyester foams, coatings, elastomers, and high-modulus urethane plastics, attests to the value of our advanced technologies and our 40-plus years of experience with urethane chemicals.

2 JEFFCAT catalysts MoldedEsterEtherHR MoldedZF-20 Bis-(2-dimethylaminoethyl)ether -- A very strong, highly efficient blowing ZF-20 in dipropylene glycol2514188*73 ZF-20 in dipropylene glycol64436204* ZF-20 in dipropylene glycol69046207* N, Triethylene diamine17462 PMCCS olid FlakesTD-33A33% TD-100 in dipropylene glycol558104180* TD-100 in monoethylene *107 ASTM N.

3 N-dimethylcyclohexylamine -- Widely used catalyst for all types of rigid Pentamethyldiethylenetriamine - Especially useful as catalyst for HCFC/water-blown rigid N,N,N',N''.

4 N''-pentamethyl- dipropylenetriamine -- Low odor catalyst with a good balance between gel Used in rigid and flexible foam N,N,N,-tris-(3-dimethylamino- propyl-)

5 Amine -- It acts as a low odor gel catalyst, designed mainly for use in rigid polyurethane N-ethylmorpholine -- Promotes surface cure for flexible polyester foams and excellent processing in polyester- based flexible N-methylmorpholine -- Good

6 Solubilizer in making polyester foams. Also useful in high rise rigid molded Dimethylpiperazine -- Good catalyst in making polyester foams. Also promotes surface cure in different odor amine catalyst blend for flexible polyester * green strength and can be used for charcoal polyester-based flexible * * initial boiling point with decomposition theoretical OH Number including polyol, amine, acid and water functionalities not determinedDescription JEFFCAT catalyst FLEXIBLE POLYESTER FOAM catalysts GENERAL PURPOSE CATALYSTSS labstockTypical ApplicationsFlexible FoamTypical PropertiesFlash Point, CBoiling Point, COH Number, mgKOH/g Viscosity, cSt at 25 CSpecific Gravity 20/20 CMicrocellulars, Elastomers, RIM, RRIMR igid Foam (PUR), Packaging FoamRigid Foam (PIR)

7 Coatings, AdhesivesNCH3CH3 ONCH3CH3 NCH3CH3 NCH3CH3 NNCH3CH3CH3 NCH3 NNCH3CH3CH3CH3CH3CH2 NONCH3CH3CH3 NONCH3CH3 OHN NNNCH3CH3 NNCH3CH3 NCH3CH3 NCH3CH3 3 MoldedEsterEtherHR MoldedZF-10 N,N,N'-trimethyl-N'-hydroxyethyl- bisaminoethylether -- Strong blowing catalyst that is highly efficient.

8 Used in foams requiring low blowing catalyst used in foams requiring low emission reactive gel catalyst blend which can replace JEFFCAT TD-33A on an equivalent part basis. Can be used in a wide variety of flexible slabstock and high resiliency (HR) foam * reactive amine catalyst blend. Excellent gel catalyst for low emissions automotive and flexible foam * low emission catalyst blend with balanced gel and blow * N-(3-dimethylaminopropyl)

9 -N,N- diisopropanolamine -- Low emission catalyst with good gelation and >210* N,N-bis(3-dimethylaminopropyl)- N-isopropanolamine -- Low emission catalyst with exceptional balance and 1,3-propanediamine, N'-(3- (dimethylamino)propyl)

10 -N,N-dimethyl- -- Low emission reactive gel , acid blocked, low emissions type blowing catalyst that offers improved material handling, low-corrosion, and phase stability in fully formulated B-side flexible molded foams. 2405104100*> , acid blocked, low emissions, low-corrosion type gelling catalyst used in all types of flexible molded foams. 25551856100*> 2-(2-dimethylaminoethoxy)