Performance Products JEFFCAT catalysts

1 Performance Products JEFFCAT catalysts For the polyurethane industry Europe, Africa & Middle East 2 Huntsman s large and growing family of unique industry-leading JEFFCAT catalysts brings strength, power and speed to a wide range of urethane applications. The widespread use of these catalysts in making polyether and polyester foams, coatings, elastomers, and high-modulus urethane plastics, attests to the value of our advanced technologies and our 40-plus years of experience with urethane chemicals.

2 JEFFCAT catalysts MoldedEsterEtherHR MoldedZF-20 Bis-(2-dimethylaminoethyl)ether -- A very strong, highly efficient blowing ZF-20 in dipropylene glycol2514188*73 ZF-20 in dipropylene glycol64436204* ZF-20 in dipropylene glycol69046207* N, Triethylene diamine17462 PMCCS olid FlakesTD-33A33% TD-100 in dipropylene glycol558104180* TD-100 in monoethylene *107 ASTM N.

3 N-dimethylcyclohexylamine -- Widely used catalyst for all types of rigid Pentamethyldiethylenetriamine - Especially useful as catalyst for HCFC/water-blown rigid N,N,N',N''.

4 N''-pentamethyl- dipropylenetriamine -- Low odor catalyst with a good balance between gel Used in rigid and flexible foam N,N,N,-tris-(3-dimethylamino- propyl-)

5 Amine -- It acts as a low odor gel catalyst, designed mainly for use in rigid polyurethane N-ethylmorpholine -- Promotes surface cure for flexible polyester foams and excellent processing in polyester- based flexible

6 N-methylmorpholine -- Good solubilizer in making polyester foams. Also useful in high rise rigid molded Dimethylpiperazine -- Good catalyst in making polyester foams. Also promotes surface cure in different odor amine catalyst blend for flexible polyester * green strength and can be used for charcoal polyester-based flexible * * initial boiling point with decomposition theoretical OH Number including polyol, amine.

7 Acid and water functionalities not determinedDescription JEFFCAT catalyst FLEXIBLE POLYESTER FOAM catalysts GENERAL PURPOSE CATALYSTSS labstockTypical ApplicationsFlexible FoamTypical PropertiesFlash Point, CBoiling Point, COH Number, mgKOH/g Viscosity, cSt at 25 CSpecific Gravity 20/20 CMicrocellulars, Elastomers, RIM, RRIMR igid Foam (PUR), Packaging FoamRigid Foam (PIR)Coatings, AdhesivesNCH3CH3 ONCH3CH3 NCH3CH3 NCH3CH3 NNCH3CH3CH3 NCH3 NNCH3CH3CH3CH3CH3CH2 NONCH3CH3CH3 NONCH3CH3 OHN NNNCH3CH3 NNCH3CH3 NCH3CH3 NCH3CH3 3 MoldedEsterEtherHR MoldedZF-10 N,N.

8 N'-trimethyl-N'-hydroxyethyl- bisaminoethylether -- Strong blowing catalyst that is highly efficient. Used in foams requiring low blowing catalyst used in foams requiring low emission reactive gel catalyst blend which can replace JEFFCAT TD-33A on an equivalent part basis.

9 Can be used in a wide variety of flexible slabstock and high resiliency (HR) foam * reactive amine catalyst blend. Excellent gel catalyst for low emissions automotive and flexible foam * low emission catalyst blend with balanced gel and blow * N-(3-dimethylaminopropyl)-N,N- diisopropanolamine -- Low emission catalyst with good gelation and >210* N,N-bis(3-dimethylaminopropyl)

10 - N-isopropanolamine -- Low emission catalyst with exceptional balance and 1,3-propanediamine, N'-(3- (dimethylamino)propyl)-N,N-dimethyl- -- Low emission reactive gel , acid blocked, low emissions type blowing catalyst that offers improved material handling, low-corrosion, and phase stability in fully formulated B-side flexible molded foams.