Transcription of Personal Protective Equipment Quiz - Trainers Module
1 This material was produced under grant number SH-16615-07-60-F-12 from the Occupational Safety and Health Administration, Department of Labor. It does not necessarily reflect the views or policies of the Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the Government. 1 Personal Protective Equipment Quiz - Trainers Module Please mark the correct answer below: 1. When employees use their own PPE, the employer is responsible for assuring its adequacy, including proper maintenance, and sanitation of such Equipment . a. True b. False Correct answer is a (True). Refer to (b) 2. In addition to impact and penetration resistance which helmet provides electrical protection from high-voltage conductors a.
2 Class A helmets b. Class B helmets c. Class C helmets d. Class D helmets Correct answer is b (they are proof tested to 20,000 volts). 3. Which of the following is responsible to assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of Personal Protective Equipment (PPE). a. Employer b. Employee c. Safety Manager d. Assessing the workplace is optional Correct answer is a . Refer to (d)(1) This material was produced under grant number SH-16615-07-60-F-12 from the Occupational Safety and Health Administration, Department of Labor. It does not necessarily reflect the views or policies of the Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the Government.
3 2 4. Which of the following items is not required on the employee s written training certification? a. Name of employee b. Date(s) of training c. Subject matter covered d. Employees test score Correct answer is d . Refer to (f)(4) 5. Protective eye and face devices purchased after July 5, 1994 shall comply with: a. Your current company standards b. NFPA 101 c. ANSI d. NEC (B) Correct answer is c . Refer to (b)(1) 6. Protective helmets purchased after July 5, 1994 shall comply with ANSI , Is this statement True or False? a. True b. False Correct answer is a (True). Refer to (b)(1) 7. Which of the following helmets are usually made of aluminum which conducts electricity, and should not be used around electrical hazards.
4 A. Class A helmets b. Class B helmets c. Class C helmets d. Class D helmets Correct answer is c . This material was produced under grant number SH-16615-07-60-F-12 from the Occupational Safety and Health Administration, Department of Labor. It does not necessarily reflect the views or policies of the Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the Government. 3 8. Rubber insulating gloves shall be tested: a. Before first issue b. Every six months c. Every year d. Both a and b Correct answer is d . Refer to (b)(2)(xii) Table 1-6 9. Protective footwear purchased after July 5, 1994 shall comply with: a.
5 ANSI Z41-1991 b. Red Wing manufacturer standards c. Your current company standards d. Whatever the boss says is OK Correct answer is a . Refer to (b)(1) 10. PPE related training must cover the following items except: a. When and what kind of PPE is necessary b. How to properly don, doff, adjust, wear, maintain and dispose of PPE c. The limitations of the PPE d. The brand name of the PPE Correct answer is d . Refer to (f)(1)(i) (v)
