PowerTech 4024T Diesel Engine - John Deere

1 PowerTech 4024T Diesel Engine Industrial Engine Specifications Dimensions 4024T shown Certifications CARB. EPA Tier 2. EU Stage II. General data Model 4024TF270 Aspiration Turbocharged Number of cylinders 4 Length - mm (in) 662 ( ). Displacement - L (cu in) (149) Width - mm (in) 566 ( ). Bore and Stroke-- mm (in) 86 x 105 ( x ) Height-- mm (in) 772 ( ). Compression Ratio :1 Weight, dry-- kg (lb) 251 (553). Engine Type In-line, 4-Cycle Intermittent BHP is the power rating for variable speed and load Continuous BHP is the power rating for applications operating applications where full power is required intermittently.

2 Under a constant load and speed for long periods of time. Heavy duty - see application ratings/definitions, Engine Power output is within + or - 5% at standard SAE J 1995 and ISO. performance curves. 3046. Photographs may show non-standard equipment. Performance curve Performance data Intermittent rated speed kW (57 hp) @ 2400 rpm Peak power 42 kW (56 hp) @ 2400 rpm Peak torque 218 (161 ft-lb) @ 1440 rpm Torque rise % 30% @ 1440 rpm Features and benefits Optimized Gear Train Independent Water Pump - Front gear train of two high-contact-ratio gears mounted to the block - Durable cast-iron water pump resists corrosion and pitting for increased wear life - Impressive low noise characteristics Poly-vee Front Drive Smooth Engine Operation - Automatic belt-tensioner and 6 rib poly-vee drive belt minimizes maintenance - Optional balancer shafts located inside the Engine block with two bearings per shaft and increases belt durability - Decreased vibration

3 Reduces operator fatigue and need for instrument and Independent Fan Drive control isolation - Fan drive operates independently of water pump and is available in two Starting Aids heights to adapt to enclosures - Fan drive ratios above and below 1:1 are available to match specific - Quick acting glow plugs are standard equipment and provide exceptional cold weather starting at temperatures as low as -15 degrees Fahrenheit application requirements - Optional block heater is available Hydraulic Valve Lifters - Automatic adjustment eliminates the need for valve-lash adjustment.

4 Innovative Fuel System contributes to lower noise levels in the valve train - Contributes to cost effectiveness and clean design - Lowers operating costs - Mechanically governed unit pumps mounted inside the block eliminate external high-pressure lines, minimize leak paths and reduce noise level Multiple-Function Component Integration - Timing gear cover includes water pump housing, oil pump housing, governor housing and sensors - Rocker arm cover includes intake manifold - Integration results in higher quality, easier service, and reliability john Deere Power Systems john Deere Power Systems All values at rated speed and power with standard options unless otherwise noted.

5 3801 W. Ridgeway Ave. Usine de Saran Specifications and design subject to change without notice. PO Box 5100 La Foulonnerie - Waterloo, IA 50704-5100 45401 Fleury les Aubrais Cedex Phone: 1-800-533-6446 France Fax : Phone: Litho in (12-01) 2012 john Deere . Fax.