Pressure Sensitive Adhesive PS100 - Capitol Adhesives

1 Pressure Sensitive AdhesivePS100 Mid Grade Roberts Capitol , Inc. | Dalton, GA 30721 | (866) 435-8665 | GICOEARTH FRIENDLY* PS100 is a very versatile, Pressure Sensitive , acrylic-based Adhesive designed for the installation of carpet tiles, commercial carpet cushions and solid vinyl tile. Features Plasticizer migration resistant Remains Pressure Sensitive for easy replacement of modular tiles and cushion removal Versatile application apply with trowel, roller or brushThis product is protected by AMP Guard , an anti-microbial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry Adhesive . *Earth Friendly Solvent Free Low VOCsPS100 is a solvent free, water-based Adhesive that meets the strict requirements of the South Coast Air Quality Management District and may contribute one LEED point for Low-Emitting Material Adhesive and Sealant (IEQ Credit ) and Low-Emitting Materials Flooring Systems (IEQ Credit ).

2 This product may also contribute one to two LEED points for MR Credit 5 if product is manufactured within 500 miles of the project site. Visit for additional details. Product Use RESIDENTIAL HEAVY TRAFFIC COMMERCIALFOR THE INTERIOR INSTALLATION OF: Vinyl-backed modular carpet tiles (releasable or permanent installation), commercial cushions for double bond applications, solid vinyl tiles, fiberglass reinforced sheet vinyl and vinyl back carpet over APA underlayment grade plywood, sanded oriented strand board (OSB), hardboard, poured- in-place gypsum underlayment (primed) or terrazzo. Physical Characteristics(70 F, Relative Humidity 50%)RELEASABLE INSTALLATION TACK TIME: Approximately 60 minutesPERMANENT INSTALLATION OPEN TIME: Up to 15 minutesWORKING TIME: 24 hours (do not allow dust to settle on Adhesive film)VOC: < g/L (coating); < by weightThis product complies with Ozone Transport Commission s VOC requirements and contains less than the maximum of 150 g/L (Indoor Floor Covering Installation).

3 STORE AND TRANSPORT: Protect from freezingSHELF LIFE: One year in unopened container Product Notes Moisture levels must not exceed 5 ,000 sq. hrs. (ASTM F1869) or 85% relative humidity (ASTM F2170). Always check with the flooring and cushion manufacturer for their allowable moisture limits. Do not exceed manufacturer s trowel notches referenced are those typically recommended for the type of flooring being installed. Surface conditions will ultimately determine trowel notch size and coverage. PS100 may also be roller installation, restrict foot traffic and moving of heavy objects for 24 to 48 hours. PreparationEnsure substrate, flooring material and Adhesive are acclimated 48 hours prior to installation and installed at the same temperature and relative humidity (RH) expected during normal use (between 65 95 F, 65% RH). Refer to flooring manufacturer s specific AND COVERAGEM odular Carpet Tileor Carpet Cushion1/16 x 1/16 x 1/16 190 sq.

4 Ft. per gallonup to 225 sq. ft. per gallonRollerModular Carpet Tile Preparation (continued)Ensure adequate ventilation during must be structurally sound, dry, smooth, flat and free of excess moisture/ alkali ( 9) and all substances that might interfere with cracks, holes, high spots and irregularities. Use polymer-modified, cement based patching compounds. Expansion/moving joints must not be filled/covered with flooring. InstallationSpread Adhesive uniformly with appropriate trowel or appropriate open time depending upon a permanent or releasable bond installation. The amount of open time and working time will vary with temperature and humidity 100% coverage of the deepest recesses of the flooring backing and full coverage on the substrate. Lift flooring periodically to ensure 100% transfer. Clean Up & RemovalWet Adhesive warm soapy Adhesive Capitol CL800 Adhesive Cleaner or mineral spirits sparingly with a clean, white, cotton cloth.

5 DO NOT POUR CLEANER DIRECTLY ON FLOORING. WarningsEXISTING FLOORING AND Adhesives MAY CONTAIN ASBESTOS. Unless you have confirmation that the existing flooring system is not asbestos containing, do not sand, dry sweep, dry scrape, abrade, drill, saw, bead blast, mechanically chip or pulverize existing flooring or Adhesive without taking all appropriate precautions. Refer to local, state and federal guidelines for treatment and removal of these products. You may also refer to the Resilient Floor Covering Institute s Recommended Work Practices for Removal of Resilient Floor Coverings. EXISTING PAINT MAY CONTAIN LEAD. Unless you have confirmation that the existing paint is not lead containing, do not sand, dry sweep, dry scrape, abrade, drill, saw, bead blast, mechanically chip or pulverize existing paint without taking all appropriate precautions. Refer to local, state and federal guidelines for treatment and removal of lead containing paint.

6 You may also refer to Limited WarrantyRoberts Capitol warrants that this product will be free from manufacturing defects for 12 months from the date of purchase, when applied in accordance with Roberts Capitol s instructions and industry standards. Roberts Capitol s sole liability is to either supply new product or refund the original purchase price. This limited warranty excludes all other express warranties including the warranties of merchantability for a particular use or purpose. Any implied warranties arising by operation of law are limited to one year. Roberts Capitol will not be liable for any incidental or consequential damages. Some states do not allow these limitations or exclusions, therefore they may not apply. Visit for full warranty details. Available Sizes4 Gallon (Item # PS100 -4)1 Gallon (Item #PS100G) Find More InfoRefer to material safety data sheet, , industry standards, and manufacturer s guidelines prior to installation for additional information.

7 For technical assistance please contact our Technical Department at (706) 277-5294.(continued on next page)PS400 Pressure Sensitive AdhesiveRoberts Capitol , Inc. | Dalton, GA 30721 | (866) 435-8665 | is a very versatile, Pressure Sensitive , acrylic-based Adhesive designed for the installation of carpet tiles, commercial carpet cushions and solid vinyl tile. Features Plasticizer migration resistant Remains Pressure Sensitive for easy replacement of modular tiles and cushion removal Versatile application apply with trowel, roller or brushThis product is protected by AMP Guard , an anti-microbial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry Adhesive . *Earth Friendly Solvent Free Low VOCsPS100 is a solvent free, water-based Adhesive that meets the strict requirements of the South Coast Air Quality Management District and may contribute one LEED point for Low-Emitting Material Adhesive and Sealant (IEQ Credit ) and Low-Emitting Materials Flooring Systems (IEQ Credit ).

8 This product may also contribute one to two LEED points for MR Credit 5 if product is manufactured within 500 miles of the project site. Visit for additional details. Product Use RESIDENTIAL HEAVY TRAFFIC COMMERCIALFOR THE INTERIOR INSTALLATION OF: Vinyl-backed modular carpet tiles (releasable or permanent installation), commercial cushions for double bond applications, solid vinyl tiles, fiberglass reinforced sheet vinyl and vinyl back carpet over APA underlayment grade plywood, sanded oriented strand board (OSB), hardboard, poured- in-place gypsum underlayment (primed) or terrazzo. Physical Characteristics(70 F, Relative Humidity 50%)RELEASABLE INSTALLATION TACK TIME: Approximately 60 minutesPERMANENT INSTALLATION OPEN TIME: Up to 15 minutesWORKING TIME: 24 hours (do not allow dust to settle on Adhesive film)VOC: < g/L (coating); < by weightThis product complies with Ozone Transport Commission s VOC requirements and contains less than the maximum of 150 g/L (Indoor Floor Covering Installation).

9 STORE AND TRANSPORT: Protect from freezingSHELF LIFE: One year in unopened container Product Notes Moisture levels must not exceed 5 ,000 sq. hrs. (ASTM F1869) or 85% relative humidity (ASTM F2170). Always check with the flooring and cushion manufacturer for their allowable moisture limits. Do not exceed manufacturer s trowel notches referenced are those typically recommended for the type of flooring being installed. Surface conditions will ultimately determine trowel notch size and coverage. PS100 may also be roller installation, restrict foot traffic and moving of heavy objects for 24 to 48 hours. PreparationEnsure substrate, flooring material and Adhesive are acclimated 48 hours prior to installation and installed at the same temperature and relative humidity (RH) expected during normal use (between 65 95 F, 65% RH). Refer to flooring manufacturer s specific recommendations. Preparation (continued)Ensure adequate ventilation during must be structurally sound, dry, smooth, flat and free of excess moisture/ alkali ( 9) and all substances that might interfere with cracks, holes, high spots and irregularities.

10 Use polymer-modified, cement based patching compounds. Expansion/moving joints must not be filled/covered with flooring. InstallationSpread Adhesive uniformly with appropriate trowel or appropriate open time depending upon a permanent or releasable bond installation. The amount of open time and working time will vary with temperature and humidity 100% coverage of the deepest recesses of the flooring backing and full coverage on the substrate. Lift flooring periodically to ensure 100% transfer. Clean Up & RemovalWet Adhesive warm soapy Adhesive Capitol CL800 Adhesive Cleaner or mineral spirits sparingly with a clean, white, cotton cloth. DO NOT POUR CLEANER DIRECTLY ON FLOORING. WarningsEXISTING FLOORING AND Adhesives MAY CONTAIN ASBESTOS. Unless you have confirmation that the existing flooring system is not asbestos containing, do not sand, dry sweep, dry scrape, abrade, drill, saw, bead blast, mechanically chip or pulverize existing flooring or Adhesive without taking all appropriate precautions.